Megger PAT400 Series Bedienungsanleitung

Testing using HOTKEYS to start test

1) From HOME screen.

2) Press for Class I test group options

3) Press 1,2,3 etc to select from available

test groups.

4) Press TEST button to start test.

5) Follow screen instructions.

6) At end of testing press to SAVE

or press to repeat test.

7) Display changes to ADD ASSET screen

8) Add a new ASSET ID.

9) Add additional data if required (optional)

10) Press to store result.

11) If the ASSET ID was added before

testing, the result will automatically be

saved and screen will return to test

groups for next test.

PAT400

Quick start guide

Class I test groups

Home screen

Class II test groups

Menu bar - Provides navigation

paths and menu options

Hot keys -

Quick access

to frequently

used test

groups, and

adding

assets

Test group

manager Add

Power/extension leads

Portable RCD

Add asset

Change client

Change location

Bond lead null

Edit asset

Edit

Save

Delete

Find asset

Battery save power OFF

HOME screen

Escape

Copy last

asset

Re-run test

Save and print

label

View test

results

List test

groups

Print barcode

SETUP screen Other icons

Adding TEST GROUPS

1) From HOME screen use right arrow to

select SETUP.

2) Press the .TEST GROUP key.

3) Press to ADD a TEST GROUP.

4) NAME:

enter TEST GROUP name and press

DOWN arrow (max. 10 characters).

5) Description:

Enter a useful description to help

remember TEST GROUP type. Press

DOWN arrow.

6) Select 230 V or 110 V depending on

asset supply voltage.

7) Select Class I, II or EXT (lead).

8) Check boxes:

Press OK to select each test required.

9) Press to enter conﬁg’ limits page.

10) Change PASS limits, test type and

number of test cycles as required.

11) Press to store new test group.

Pressing TEST button to start test

1) Press TEST button.

2) Add ASSET ID (this can be left until

after testing).

3) Press to list the test groups available

4) Use DOWN arrow and OK to select

the group required.

5) Press TEST to initiate testing.

6) Follow screen instructions.

7) At end of testing press to SAVE

or press to repeat test.

ABORTING A TEST

To abort a test during the test sequence

press TEST or buttons.

Test will be displayed as an aborted test.

Adding ASSETS

1) From HOME screen press to add a

new asset to database.

2) Enter ASSET ID and press DOWN

arrow.

3) Press OK to select TEST GROUP from

drop down options and press OK.

4) Add additional data if required.

5) Press to ADD asset to database.

Adding Clients/Locations

1) Select CLIENT from SETUP menu.

2) Press to add new client.

3) Add client Name. Other ﬁelds are

optional.

Press OK to accept.

4) Press to save client detail. Display

will jump to ADD locations.

5) Add location name. Other ﬁelds are

optional.

6) Press to SAVE asset to database.

Current client/location automatically updates.

Note: Asset ID and optional additional data can be added before testing or after testing, as required.

Repair code

pop-up box

activation

Copy last asset

(& increment

asset ID)

GSafety Warnings

The following safety warnings and precautions must be read and understood before the

instrument is used. They must be observed during use.

nFor safety, only connect the PAT to a supply that is properly earthed. If in doubt, the

supply should be checked by a qualiﬁed electrician.

nDo not use the instrument if there are any signs of damage.

nAll test leads, probes and clips must be in good order, clean and with no broken or

cracked insulation.

nProbes and clips should be held behind the ﬁnger guard.

nTest leads not used during a measurement should be disconnected from the appliance

tester.

nFor dual voltage testers, both sockets can be live simultaneously.

nOnly connect one asset to the PAT during testing.

nTests should be carried out in the order recommended below. An appliance that fails a

test should be repaired before further testing is carried out.

Recommended sequence:

1. Visual inspection.

2. Earth bond/ continuity of the protective earth conductor (Class I devices).

3. Insulation test (or earth leakage).

In addition further tests can be performed, but ONLY AFTER 1 & 2 above.

4. Operation test.

5. Leakage test.

nOnly perform an operational test after the earth bond and insulation tests have been

completed, as this test operates at mains voltage.

nDuring testing, ensure no hazard will exist as a result of normal running or under fault

conditions.

nDuring testing the unit under test (asset) should not be touched, other than using the

appropriate accessories, as faulty appliances can present a shock hazard.

nDo not touch the exposed parts of test leads during tests as hazardous voltages may be

present due to potentially faulty appliance.

nDo not touch the IEC extension lead socket pins especially during a test, as hazardous

voltages may be present due to a potentially faulty appliance.

nAssets should not be routinely ﬂash tested. Where ﬂash testing is required, refer to

further guidance on ﬂash testing in the user guide.

nReplacement fuses must be of the correct rating and type. Refer to the user guide.

nThe USB connection marked thus



should only be used by approved service

personnel; nothing should be connected to the USB port during testing.

nOnly use a NiMH rechargeable 8.4 V PP3 battery, do not use a non rechargeable type as

this could become dangerous if charged by the instrument.

nServiceable fuses should only be replaced with those that are suitably rated.

nIn case of an emergency use an easily accessible power point.

nOnly use Megger approved accessories with this product.

For service requirements contact:

Megger or Megger

Archcliffe Road Valley Forge Corporate Centre

Dover 2621 Van Buren Avenue

Kent CT17 9EN Norristown PA 19403

England. U.S.A.

Tel: +44 (0) 1304 502 243 Tel: +1 610 676 8579

Fax: +44 (0) 1304 207 342 Fax: +1 610 676 8625

Symbols used on the instrument

FCaution: risk of electric shock.

GCaution: refer to accompanying notes.

cEquipment complies with relevant EU Directives.

Equipment complies with ‘C tick’ requirements.

Fused.

This equipment should be recycled as electronic waste.

HV test lead in unlocked position.

HV test lead in locked position.

Battery type ﬁtted.

DO NOT connect to 230 V supply.

Printed in the UK Part No. PAT400_QS_2000-965_en_V03



N13117

Andere Handbücher für PAT400 Series

Inhaltsverzeichnis

Andere Megger Prüfgeräte Handbücher

Megger

Megger MIT510 Bedienungsanleitung

Megger

Megger MFT-X1 Bedienungsanleitung

Megger

Megger TDR2000/3 Bedienungsanleitung

Megger

Megger HPA 100 AC Bedienungsanleitung

Megger

Megger MIT30 Bedienungsanleitung

Megger

Megger MLR10 Bedienungsanleitung

Megger

Megger MTB7671 Bedienungsanleitung

Megger

Megger PA-9 Series Bedienungsanleitung

Megger

Megger BT 500-IS-1 Bedienungsanleitung

Megger

Megger OTS60SX/2 Bedienungsanleitung

Megger

Megger OTS100AF Bedienungsanleitung

Megger

Megger TDM 45-P Bedienungsanleitung

Megger

Megger SVERKER 750 Bedienungsanleitung

Megger

Megger DET3 Series Bedienungsanleitung

Megger

Megger DET2/3-ETK-50M Bedienungsanleitung

Megger

Megger MPRT 8415 Bedienungsanleitung

Megger

Megger DET3TA Bedienungsanleitung

Megger

Megger BM80/2 Series Bedienungsanleitung

Megger

Megger MFT1700 series Bedienungsanleitung

Megger

Megger Vidar Bedienungsanleitung

Megger

Megger MIT200 Series Bedienungsanleitung

Megger

Megger Baker ADX Bedienungsanleitung

Megger

Megger TTR20 Bedienungsanleitung

Megger

Megger INGVAR Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung