Meggitt Vibro-meter SpeedSys300 ODS301 Bedienungsanleitung

Meggitt SA, Route de Moncor 4, Case postale, 1701 Fribourg, Switzerland Tel: +41 26 407 1111

Fax: +41 26 407 1660

energy@ch.meggitt.com

www.meggittsensing.com/energy

www.meggitt.com

USER MANUAL

Title page

SpeedSys300 ODS301

overspeed detection system (ODS)

This document contains important

information about products that

are intended for use in potentially

explosive atmospheres and/or

safety-related applications.

Document reference MAODS301/E

Edition 4 – May 2022

USER MANUAL Document reference MAODS301/E

SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022

REVISION RECORD SHEET

Edition Date

of issue

Written by /

modified by Description Signature

1 03.05.2021 Peter Ward Original edition. PW

2 25.06.2021 Peter Ward

Updated Figure 1-2, notably to include the bridge

(short-circuit) required on the magnetic sensor input.

Also updated the connector pinouts in 2.2 SpeedSys300

ODS301 module connectors (for consistency with the

labelling used by the updated Figure 1-2).

Changed the safety symbols in 3.2.12 Safety instructions –

potentially explosive atmospheres to “STOP” WARNINGs

(were “!” CAUTIONs).

Updated Appendix B: ATEX certifications:

Updated IBExU 20 ATEX 1157 (SpeedSys300 ODS301).

Updated Appendix F: SpeedSys300 ODS301 Modbus

addresses: 0012,0108, 0563-0568, 3024, 4008,

4016-4019, 4500, 4512, 5026, 5046-5055, 5516-5554,

5638-5640 and 6004-6006. Also reformatted the tables

(Table F-xx) to improve readability.

3 02.12.2021 Peter Ward

Updated the Interface diagram and connector pinouts

related to the power supply inputs and the serial

communications interface to use instrument earth /

GND (IE). See Figure 1-2, Ta ble 2-7 , Table 2 -8 and

Table 2-13.

Updated 3.2.2 Power supply and 3.2.3 Grounding, and

added 3.2.4 Shielding, in order to clarify power supply,

grounding and shielding requirements as per the technical

note (TN_SSY-20210729-1). Also added 3.2.8 Sensor /

input channel interface circuitry.

Updated Table 3-12 to correct 2oo3 voting logic using

safety relay 2 of SpeedSys300 ODS301 modules.

Pins B22 and B23 (safety relay 2) are now used instead of

the incorrect pins B18 and B19 (safety relay 1).

Added specifications for the SpeedSys300 ODS301

module’s screw-terminal connectors (see Tabl e 3 -1 3 ).

Added new information on SpeedSys300 software

language files in order to clarify their use.

See 4.2.1 Language pack files.

Updated 4.5.4 Example configuration files to include all

configuration files (*.ssy) included with the SpeedSys300

software.

Updated 4.6.1 Changing the Admin access level password

to include information on permitted passwords.

Updated 5.5.1 Diagnostics tab – Diagnostics to include

information on the recommended configuration of the

“Analog output readback difference” as per the service

bulletin (FSB_SSY-20210714-1).

Added 7 Electrical connections in order to provide a more

detailed wiring diagram for a typical SpeedSys300 ODS301

overspeed detection system (ODS) using a TQ9xx-based

proximity measurement chain.

…

Document reference MAODS301/E USER MANUAL

Edition 4 - May 2022 SpeedSys300 ODS301 overspeed detection system

iii

The duly signed master copy of this page is stored by the Technical publications department of Meggitt SA

and can be obtained by writing to Technical publications.

(cont.) 02.12.2021 Peter Ward

…

Updated Appendix B: ATEX certifications:

Updated IBExU 20 ATEX 1157 (SpeedSys300 ODS301).

Updated Appendix C: IECEx certifications:

Updated IECEx IBE 20.0045 (SpeedSys300 ODS301).

Updated Appendix D: Frequently asked questions (FAQ) to

include two new FAQs. See D.7 I am seeing a “Slave

communication error” message. What should I check? and

D.8 I am seeing a “Relays PST failed” message. What

should I check?

4 09.05.2022 Peter Ward

Updated 7 Electrical connections to use the latest electrical

diagrams (see Figure 7-1 and Figure 7-2).

Updated the Energy product return procedure and form to

be consistent with the Meggitt vibro-meter® Energy website

(see 10 Service and support).

Department Name Date Signature

Technical content

approved by

ATEX Manager Pascal Kornatko 09.05.2022 PK

Product Line Management Michaël Hafner 09.05.2022 MH

Document released by Technical Publications Peter Ward 09.05.2022 PW

Edition Date

of issue

Written by /

modified by Description Signature

USER MANUAL Document reference MAODS301/E

SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022

Important notices

IMPORTANT NOTICES

All statements, technical information, and recommendations in this document which relate to the products supplied

by Meggitt vibro-meter® (Meggitt SA) are based on information believed to be reliable, but unless otherwise

expressly agreed in writing with Meggitt SA the accuracy or completeness of such data is not guaranteed. Before

using this product, you must evaluate it and determine if it is suitable for your intended application. You should also

check our website at www.meggittsensing.com/energy for any updates to data sheets, Ex certificates, product

drawings, user manuals, service bulletins and/or other instructions affecting the product.

Unless otherwise expressly agreed in writing with Meggitt SA, you assume all risks and liability associated with use

of the product. Meggitt SA takes no responsibility for any statements related to the product which are not contained

in a current English language Meggitt SA publication, nor for any statements contained in extracts, summaries,

translations or any other documents not authored and produced by Meggitt SA.

The certifications and warranties applicable to the products supplied by Meggitt SA are valid only for new products

purchased directly from Meggitt SA or from an authorised distributor of Meggitt SA.

Meggitt SA reserves the right to alter any part of this publication without prior notice.

EXPORT CONTROL

The information contained in this document may be subject to export control regulations of the European

Community, USA or other countries. Each recipient of this document is responsible for ensuring that the transfer or

use of any information contained in this document complies with all relevant export control regulations. ECN N/A.

Published and printed by Meggitt SA in Fribourg, Switzerland.

The names of actual companies and products mentioned

herein may be the trademarks of their respective owners.

The information contained in this document is subject to change without notice.

This information shall not be used, duplicated or disclosed, in whole or in part,

without the express written permission of Meggitt SA (Meggitt vibro-meter®).

Document reference MAODS301/E USER MANUAL

Edition 4 - May 2022 SpeedSys300 ODS301 overspeed detection system

PREFACE

About this manual

This manual provides information on the SpeedSys300 ODS301 overspeed detection system

(ODS), from Meggitt’s vibro-meter® product line.

It offers information concerning the installation, configuration and general use of systems

using ODS301 modules for overspeed, underspeed and/or acceleration detection and

protection applications.

About Meggitt and vibro-meter®

Meggitt PLC is a global engineering group, headquartered in the UK, specialising in the

design and manufacture of high-performance components and systems for aerospace and

energy markets.

The Meggitt facility in Fribourg, Switzerland, operates as the legal entity Meggitt SA (formerly

Vibro-Meter SA). vibro-meter® is a product line of Meggitt that applies our core sensing and

monitoring technologies to power generation, oil & gas and other industrial markets.

Meggitt SA produces a wide range of vibration, dynamic pressure, proximity, air-gap and

other sensors capable of operation in extreme environments, electronic monitoring and

protection systems, and innovative software for aerospace and land-based turbomachinery.

vibro-meter® products and solutions have been at the forefront of sensing and monitoring for

more than 65 years and help keep machinery and equipment working safely, reliably and

efficiently. This includes the SpeedSys300 ODS301 overspeed detection system (ODS)

produced for the Meggitt vibro-meter® product line.

To learn more about Meggitt Switzerland, our proud tradition of innovation and excellence,

and our solutions for energy markets and applications, visit the Meggitt vibro-meter® Energy

website at www.meggittsensing.com/energy

USER MANUAL Document reference MAODS301/E

SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022

Who should use this manual?

This manual is intended for qualified personnel such as designers and operators of

monitoring/control and/or protection systems in safety-related applications that use a

SpeedSys300 ODS301 overspeed detection system (ODS).

NOTE: Personnel involved in the design, installation, operation and maintenance of

Meggitt vibro-meter® systems are assumed to have the necessary technical

training in safety, reliability, electronics and/or mechanical engineering

(professional certificate/diploma or equivalent) to enable them to design, install,

configure, use and/or maintain such systems correctly and safely.

Adhere to the instructions!

The procedures described in this manual should be strictly adhered to in order to ensure that

SpeedSys300 ODS301 overspeed detection system (ODS) modules and their associated

equipment are properly installed. This ensures that measurement signals are reliable and

systems function as intended.

The user should adhere to general safety procedures as well as general and specific machine

constructor guidelines and instructions.

Limitations of this document

Not all mounting and connecting possibilities are described in this manual. Nevertheless,

several specific configurations are described in detail. These can often be adapted to specific

applications (contact your local Meggitt representative or Meggitt SA for further information).

Document reference MAODS301/E USER MANUAL

Edition 4 - May 2022 SpeedSys300 ODS301 overspeed detection system

vii

Related documentation

Further information on products can be found in their corresponding data sheets, which are

available from our website at www.meggittsensing.com/energy or can be obtained from your

local Meggitt representative.

For further information on the SpeedSys300 ODS301 overspeed detection system (ODS),

refer to the following Meggitt vibro-meter® documentation:

•SpeedSys300 ODS301 overspeed detection system data sheet

(document reference DS 660-020-070-203A).

Operators of safety-related systems using the SpeedSys300 ODS301 overspeed detection

system (ODS) should also refer to the following document:

•SpeedSys300 ODS301 overspeed detection system safety manual

(document reference MAODS301-FS/E).

NOTE: To ensure that the latest version of documentation is being used, visit the

Meggitt vibro-meter® Energy website at www.meggittsensing.com/energy and

check for any updates. Alternatively, contact your local Meggitt representative.

USE OF A SPEEDSYS300 ODS301 OVERSPEED DETECTION SYSTEM (ODS) IN A

SAFETY-RELATED APPLICATION ASSUMES THAT THE INSTRUCTIONS AND

RECOMMENDATIONS IN THE SPEEDSYS300 ODS301 OVERSPEED DETECTION SYSTEM

(ODS) SAFETY MANUAL ARE IMPLEMENTED AS APPROPRIATE BY THE END USER.

FAILURE TO FOLLOW THE INSTRUCTIONS AND IMPLEMENT THE RECOMMENDATIONS IN

THE SAFETY MANUAL MIGHT RESULT IN INJURY TO THE OPERATOR AND/OR THIRD

PARTIES, AND/OR RESULT IN DAMAGE TO EQUIPMENT AND WILL INVALIDATE ANY

WARRANTY.

USER MANUAL Document reference MAODS301/E

SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022

viii

THIS PAGE INTENTIONALLY LEFT BLANK

Document reference MAODS301/E USER MANUAL

Edition 4 - May 2022 SpeedSys300 ODS301 overspeed detection system

SAFETY

Symbols and styles used in this manual

The following symbols are used in this manual where appropriate:

NOTE: This is an example of the NOTE paragraph style. This draws the operator’s

attention to complementary information or advice relating to the subject being

treated.

The WARNING safety symbol

THIS INTRODUCES DIRECTIVES, PROCEDURES OR PRECAUTIONARY MEASURES WHICH

MUST BE EXECUTED OR FOLLOWED. FAILURE TO OBEY A WARNING MIGHT RESULT IN

INJURY TO THE OPERATOR AND/OR THIRD PARTIES, AND/OR RESULT IN DAMAGE TO

EQUIPMENT.

The CAUTION safety symbol

This draws the operator's attention to information, directives or procedures

which must be executed or followed. Failure to obey a caution can result in

damage to equipment.

The ELECTROSTATIC SENSITIVE DEVICE symbol

This indicates that the device or system being handled can be damaged by

electrostatic discharges. See Handling precautions for electrostatic

sensitive devices on page xii for further information.

Direct current Signal 0 V (ground) terminal

Alternating current Class II equipment

Direct and alternating current Caution, general danger

Earth (ground) terminal Caution, possibility of electric

shock

Protective conductor (ground)

terminal Caution, hot surface

Frame or chassis (ground)

terminal

USER MANUAL Document reference MAODS301/E

SpeedSys300 ODS301 overspeed detection system Edition 4 - May 2022

Equipment installed in potentially explosive atmospheres

Important remarks on safety-related applications

Important remarks on safety

Every effort has been made to include specific safety-related procedures in this manual using

the symbols described above. However, operating personnel are expected to follow all

generally accepted safety procedures.

All personnel who are liable to operate the equipment described in this manual should be

trained in the correct safety procedures.

THIS MANUAL COVERS EQUIPMENT THAT CAN BE CONNECTED TO PRODUCTS USED IN

POTENTIALLY EXPLOSIVE ATMOSPHERES (HAZARDOUS AREAS), AS WELL AS

EQUIPMENT THAT IS SUITABLE FOR ORDINARY APPLICATIONS (NON-EXPLOSIVE

ATMOSPHERES) ONLY.

TO ENSURE THAT THE EQUIPMENT CAN BE SAFELY CONNECTED TO PRODUCTS USED IN

POTENTIALLY EXPLOSIVE ATMOSPHERES (EXZONES), IT IS ESSENTIAL TO:

•V

ERIFY THAT IT HAS THE SPECIAL MARKING DESCRIBED IN THE EX CERTIFICATES

FOR THE PRODUCT.

•A

DHERE TO THE CRITERIA DEFINED IN THE SAME EX CERTIFICATES.

AN “X” PLACED AFTER AN EX CERTIFICATE NUMBER IS USED TO INDICATE EQUIPMENT

THAT IS SUBJECT TO SPECIFIC CONDITIONS OF USE (SPECIAL CONDITIONS FOR SAFE

USE), WHICH ARE SPECIFIED IN THE CERTIFICATE. A “U” PLACED AFTER AN EX

CERTIFICATE NUMBER IS USED TO INDICATE COMPONENTS THAT ARE SUBJECT TO A

SCHEDULE OF LIMITATIONS, WHICH ARE SPECIFIED IN THE CERTIFICATE.

FOR FURTHER INFORMATION, SEE THE EX CERTIFICATES IN THE APPENDICES OF THIS

MANUAL. (THE EX CERTIFICATES ARE ALSO AVAILABLE FROM OUR WEBSITE AT

WWW.MEGGITTSENSING.COM/ENERGY)

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Meggitt vibro-meter SpeedSys300 ODS301 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken