Installation instructions AirConcept - Exhaust air heat recuperation
2
Contents
Page
1Important information: 2
2Installation kit (9697787) 2
3Installation Exhaust air heat recuperation (For example: DV 80.2) 3
1Important information:
In case of electr. conductivity of the inlet water < 100 µS/cm, the stainless steel
heat exchanger available as an option must be used.
2Installation kit (9697787)
1. Bolt M5x12 ...........................................6 St
2. Washer M5................................. ................10 pcs
3. Nut M5 self-locking with flange.............6 pcs
4. Nut M5 self-locking .................. ...........4 pcs
4. Cable tie 200mm ............................ ..............10 pcs
5. Self-tapping screws ........................................11 pcs
6. Metal clip .......................................................8 pcs
