Meinberg ANZ14 Bedienungsanleitung

MANUAL

ANZ14/ANZ14DCF/ANZ14NET

LED Display with

DCF77 or NTP Option

28th October 2019

Meinberg Funkuhren GmbH & Co. KG

Table of Contents

1 Imprint 1

2 Safety Hints 2

2.1 Important Safety Instructions and Protective Measures ......................... 2

2.2 Used Symbols ................................................. 3

2.3 Security during Installation ......................................... 5

2.4 Protective Conductor- / Ground-Terminal ................................. 8

2.5 Safety during Operation ........................................... 8

2.6 Safety during Maintenance ......................................... 9

2.7 Handling Batteries .............................................. 9

2.8 Cleaning and Care .............................................. 10

2.9 Prevention of ESD Damage ......................................... 11

2.10 Return of Electrical and Electronic Equipment .............................. 12

3 Features of the ANZ14 13

3.1 Microprocessor System ........................................... 13

3.2 Buﬀered Real Time Clock .......................................... 13

3.3 EEPROM ................................................... 13

3.4 Display ..................................................... 14

3.5 Serial Interface ................................................ 14

3.6 Power Supply ................................................. 14

4 ANZ14 (DCF Option) 15

4.1 General Information about DCF77 ..................................... 15

4.2 DCF77 Receiver ............................................... 16

4.3 Mounting the Antenna ............................................ 16

5 ANZ14 (NET Option) 17

5.1 Network Time Protocol (NTP) ....................................... 17

5.2 Time and Date Display with NTP synchronized Reference ...................... 17

5.3 Error-Code ................................................... 18

5.4 Network Conﬁguration ............................................ 18

5.5 DHCP ..................................................... 19

5.6 ARP Method ................................................. 19

5.7 Extended Conﬁguration via Telnet ..................................... 20

5.7.1 Menu Option 0: Server conﬁguration ............................... 21

5.7.2 Menu Option 1: Security conﬁguration .............................. 22

5.7.3 Menu Option 2: SNMP Conﬁguration .............................. 22

5.7.4 Menu Option 3: Syslog Conﬁguration .............................. 22

5.7.5 Menu Option 4: Reserved ..................................... 23

5.7.6 Menu Option 5: Time Zone Conﬁguration ............................ 23

5.7.7 Menu Option 6: NTP Client Conﬁguration ........................... 23

5.7.8 Menu Option 7: Factory Defaults ................................. 23

5.7.9 Menu Option 8: Exit without save ................................ 23

5.7.10 Menu Option 9: Save and exit ................................... 23

5.8 SNMP Reference ............................................... 24

5.9 List of Literature ............................................... 25

6 Setup Menu 26

6.1 Enter [En.] ................................................... 26

6.2 Brightness [Br.] ................................................ 26

6.3 Time Zone [TZ] ................................................ 26

6.4 Language [Lg.] ................................................. 27

6.5 Baudrate [Bd. 0] or [Bd. 1] ......................................... 27

6.6 Framing [Fr. 0] or [Fr. 1] ........................................... 27

6.7 Serial Mode [SM. 0] or [SM. 1] ....................................... 27

6.8 Time String Out [TS. 0] or [TS. 1] ..................................... 28

6.9 Time Zone Out [TZ. 0] or [TZ. 1] ...................................... 28

6.10 Sync In [In.] .................................................. 28

6.11 IP Address [IP] (ANZ14NET only) ..................................... 29

6.12 Debug Mode [DM] (ANZ14NET only) ................................... 29

6.13 Time String IN [TS in] ............................................ 29

6.14 Serial Number [SN] ............................................. 29

6.15 Set Time .................................................... 29

6.16 Factory Defaults [FD] ............................................ 30

6.17 Save [Sv.] .................................................... 30

7 Synchronisation via Serial Interface 31

8 Firmware Updates 32

9 Technical Speciﬁcations ANZ14 33

9.1 Rear Panel Connectors ........................................... 34

9.1.1 Pin Assignment of the D-SUB Connectors COM0 / COM1 .................. 34

9.2 Rear Views .................................................. 35

9.3 Time Strings .................................................. 36

9.3.1 Format of the Meinberg Standard Time String ......................... 36

9.3.2 Format of the Uni Erlangen String (NTP) ............................ 37

9.3.3 Format of the ATIS standard Time String ............................ 39

9.3.4 Format of the SYSPLEX-1 Time String ............................. 40

9.3.5 Format of the SAT Time String .................................. 41

9.3.6 Format of the SPA Time String .................................. 42

9.3.7 Format of the Computime Time String .............................. 43

9.3.8 Format of the NMEA 0183 String (RMC) ............................ 44

10 Declaration of Conformity 45

Date: 28th October 2019 ANZ14/ANZ14DCF/ANZ14NET

1 Imprint

Meinberg Funkuhren GmbH & Co. KG

Lange Wand 9, 31812 Bad Pyrmont / Germany

Phone: + 49 (0) 52 81 / 93 09 - 0

Fax: + 49 (0) 52 81 / 93 09 - 230

Internet: https://www.meinbergglobal.com

Mail: [email protected]

Date: 2014-06-20

ANZ14/ANZ14DCF/ANZ14NET Date: 28th October 2019 1

2 Safety Hints

2.1 Important Safety Instructions and Protective Measures

The following safety instructions must be respected in all operating and installation phases of the device. Non-

observance of safety instructions, or rather special warnings and operating instructions in product manuals,

violates safety standards, manufacturer instructions and proper usage of the device. Meinberg Funkuhren shall

not be responsible for any damage arising due to non-observance of these regulations.

Depending on your device or the installed options

some information is not valid for your device.

The device satisﬁes the requirements of the following EU regulations: EMC-Directive,

Low Voltage Directive, RoHS Directive and - if applicable - the Radio Equipment Directive.

If a procedure is marked with the following signal words, you may only continue, if you have understood and

fulﬁlled all requirements. In this documentation dangers and indications are classiﬁed and illustrated as follows:

DANGER!

The signal word indicates an imminently hazardous situation with a high risk level . This notice

draws attention to an operating procedure or similar proceedings, of which a non-observance may

result in serious personal injury or death .

WARNING!

The signal word indicates a hazard with a medium risk gradient . This notice draws attention to an

operating procedure, a procedure or the like which, if not followed, can lead to serious injuries ,

possibly resulting in death .

CAUTION!

The signal word indicates a hazard with a low risk gradient . This notice draws attention to an

operating procedure, a procedure or the like which, if not followed, can lead to minor injuries .

ATTENTION!

This notice draws attention to an operating procedure, a procedure or the like which, if not followed,

can cause damage to the product or loss of important data .

2 Date: 28th October 2019 ANZ14/ANZ14DCF/ANZ14NET

2 Safety Hints

2.2 Used Symbols

The following symbols and pictograms are used in this manual. To illustrate the source of danger, pictograms

are used, which can occur in all hazard classes.

Symbol

Beschreibung / Description

IEC 60417-5031

Gleichstrom / Direct current

IEC 60417-5032

Wechselstrom / Alternating current

IEC 60417-5017

Erdungsanschluss / Earth (ground) terminal

IEC 60417-5019

Schutzleiteranschluss / Protective earth (ground) terminal

ISO 7000-0434A

Vorsicht / Caution

IEC 60417-6042

Vorsicht, Risiko eines elektrischen Schlages / Caution, risk of electric shock

IEC 60417-5041

Vorsicht, heiße Oberfläche / Caution, hot surface

IEC 60417-6056

Vorsicht, Gefährlich sich bewegende Teile / Caution, moving fan blades

IEC 60417-6172

Trennen Sie alle Netzstecker / Disconnection, all power plugs

IEC 60417-5134

Elektrostatisch gefährdete Bauteile / Electrostatic Sensitive Devices

IEC 60417-6222

Information generell / Information general

2012/19/EU

Dieses Produkt fällt unter die B2B Kategorie. Zur Entsorgung muss es an den

Hersteller übergeben werden.

This product is handled as a B2B category product. In order to secure a WEEE

compliant waste disposal it has to be returned to the manufacturer.

ANZ14/ANZ14DCF/ANZ14NET Date: 28th October 2019 3

The manuals for a product are included in the scope of delivery of the device on a USB stick. The manuals can

also be obtained via the Internet. Enter www.meinbergglobal.com into your browser, then enter the correspond-

ing device name in the search ﬁeld at the top.

This manual contains important safety instructions for the installation and operation of the

device. Please read this manual completely before using the unit.

This device may only be used for the purpose described in this manual. In particular, the given

limits of the device must be observed. The safety of the installation in which the unit is

integrated is the responsibility of the installer!

Non-observance of these instructions can lead to a reduction in the safety of this device!

Please keep this manual in a safe place.

This manual is intended exclusively for electricians or persons trained by an electrician who are familiar with

the applicable national standards and safety rules. Installation, commissioning and operation of this device may

only be carried out by qualiﬁed personnel.

4 Date: 28th October 2019 ANZ14/ANZ14DCF/ANZ14NET

2 Safety Hints

2.3 Security during Installation

WARNING!

Preparing for Commissioning

This built-in unit, has been designed and examined according to the requirements of the standard

IEC 60950-1 „Information Technology Equipment - Safety".

When the built-in unit is used in a terminal (e.g., housing cabinet), additional requirements

according to Standard IEC 60950-1 must be observed and complied with. In particular, the general

requirements and the safety of electrical equipment (such as IEC, VDE, DIN, ANSI) as well as the

applicable national standards are to be observed.

The device has been developed for use in the industrial sector as well as in residential areas and

can only be used in such environments. For environments with higher levels of soiling, additional

measures, e.g. Installation in an air-conditioned control cabinet required.

Transport, Unpacking, Installation

If the unit is brought into the operating room from a cold environment, condensation may occur,

wait until the unit is temperature-controlled and absolutely dry before operating it.

When unpacking, setting up, and before operating the equipment, be sure to read the information on

the hardware installation and the speciﬁcations of the equipment. These include, for example,

dimensions, electrical characteristics, and necessary ambient and climatic conditions, etc.

The ﬁre protection must be ensured in the installed state.

For mounting, the housing must not be damaged. No holes may be drilled in the housing.

For safety reasons, the device with the highest mass should be installed in the lowest position of

the rack. Other devices must be placed from the bottom to the top.

The device must be protected against mechanical stress such as vibration or shock.

ANZ14/ANZ14DCF/ANZ14NET Date: 28th October 2019 5

Connecting Data Cables

During a thunderstorm, data transmission lines must not be connected or disconnected (risk of

lightning).

When wiring the devices, the cables must be connected or disconnected in the order of the

arrangement described in the user documentation accompanying the device. Always attach all cables

to the plug during connection and removal. Never pull the cable itself. Pulling the cable can cause

the cables to disconnect from the plug.

Install the cables in way that they do not constitute a hazard (danger of tripping) and are not

damaged, i.e. kinked.

Connecting Power Supply

This equipment is operated at a hazardous voltage. Non-observance of the safety instructions in this

manual may result in serious personal injury or property damage.

Before connecting to the power supply, a grounding cable must be connected to the earth connection

of the device.

Before operation, check that all cables and lines work properly and are undamaged. Pay particular

attention to the facts that the cables do not have kinks or that they are not too short around corners,

and no objects are placed on the cables. Also make sure that all connections are secure.

Faulty shielding or cabling will endanger your health (electrical shock) and may destroy other

equipment.

Ensure that all necessary safety precautions have been taken. Make all connections to a unit before

turning on the power. Observe the safety instructions on the device (see safety symbols).

The metal housing of the device is grounded. It must be ensured that enough air and creepage

distances to neighboring voltage-carrying parts are provided during assembly in the control cabinet

and no short circuits are caused.

In the case of malfunctions or servicing (e.g. in the event of a damaged housing or power cable or

when ﬂuids or foreign objects enter), the current ﬂow can be interrupted. Questions about the

house installation, need to be clariﬁed with your house administration.

The power supply should be connected with a short, low-inductance line.

6 Date: 28th October 2019 ANZ14/ANZ14DCF/ANZ14NET

Andere Handbücher für ANZ14

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung