Meinberg DCF600HS Bedienungsanleitung

SETUP GUIDE

DCF600HS

DCF Clock with Serial Interface

February 24, 2023

Meinberg Funkuhren GmbH & Co. KG

Table of Contents

1 Imprint 1

2 Change Log 2

3 Copyright and Liability Exclusion 3

4 Introduction 4

5 Presentation Conventions in this Manual 5

5.1 Conventions for the Presentation of Critical Safety Warnings . . . . . . . . . . . . . . . . . . . . . 5

5.2 Secondary Symbols Used in Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5.3 Conventions for the Presentation of Other Important Information . . . . . . . . . . . . . . . . . . . 6

5.4 GenerallyApplicableSymbols ....................................... 6

6 Important Safety Information 7

6.1 AppropriateUsage .............................................. 7

6.2 ProductDocumentation ........................................... 8

6.3 Safety when Installing the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.4 ElectricalSafety ............................................... 10

6.4.1 Special Information for Devices with DC Power Supply . . . . . . . . . . . . . . . . . . . . 12

6.5 Safety when Maintaining and Cleaning the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6.6 BatterySafety ................................................ 13

7 Important Product Information 14

7.1 CEMarking.................................................. 14

7.2 UKCAMarking ................................................ 14

7.3 Ensuring the Optimum Operation of Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

7.4 MaintenanceandModiﬁcations ...................................... 15

7.4.1 ReplacingtheBattery........................................ 15

7.5 Disposal.................................................... 16

8 DCF600HS Connectors and Indicators 17

8.1 DCPowerSupplyConnector........................................ 18

8.2 Antenna Input - DCF77 Reference Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

8.3 ProgrammablePulseOutputs........................................ 20

8.4 StatusLEDs.................................................. 21

8.5 COMxTimeString:RS-232 ........................................ 22

9 Before You Start 23

9.1 ContentsofDelivery............................................. 23

9.2 MeinbergDeviceManager ......................................... 24

9.3 PowerandSignalCables.......................................... 25

10 Installation of a DCF77 Antenna 26

11 Mounting the DCF600HS 32

11.1ConnectingtheSystem ........................................... 33

12 Conﬁguration of the DCF600HS 36

12.1Installation&FirstLaunch ......................................... 36

12.2ConﬁguringtheReferenceClock...................................... 38

12.3SerialSettings ................................................ 39

12.4OutputSettings................................................ 40

12.5ProgrammableOutputs ........................................... 41

13 DCF600HS Status Monitoring 43

13.1StatusOverview ............................................... 43

13.2ClockStatus.................................................. 44

14 Firmware Update 45

15 Technical Appendix: DCF600HS 46

15.1 Technical Speciﬁcations: Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

15.2 General Information about DCF77 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

15.3TimeStrings.................................................. 49

15.3.1 Format of the Meinberg Standard Time String . . . . . . . . . . . . . . . . . . . . . . . . . 49

15.3.2 Format of the SAT Time String . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

15.3.3 Format of the Uni Erlangen String (NTP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

15.3.4 Format of the NMEA 0183 String (RMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

15.3.5 Format of the ATIS standard Time String . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

15.4 Description of Programmable Pulse Signal Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

16 Technical Speciﬁcations AW02 Antenna 58

16.1 Technical Speciﬁcations: Antenna Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

16.2 Technical Speciﬁcations: MBG S-PRO Surge Protector . . . . . . . . . . . . . . . . . . . . . . . . 61

16.2.1 MBG S-PRO: Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

16.2.2 InstallationandGrounding..................................... 63

17 RoHS Conformity 64

18 Declaration of Conformity for Operation in the European Union 65

19 Declaration of Conformity for Operation in the United Kingdom 66

Date: February 24, 2023 DCF600HS

1 Imprint

Meinberg Funkuhren GmbH & Co. KG

Lange Wand 9, 31812 Bad Pyrmont, Germany

Phone: + 49 (0) 52 81 / 93 09 - 0

Fax: + 49 (0) 52 81 / 93 09 - 230

Website: https://www.meinbergglobal.com

Email: [email protected]

Date: August 24, 2022

Manual

Version: 2.00

DCF600HS Date: February 24, 2023 1

2 Change Log

Version Date Revision Notes

———————————————————————————————————————————————

1.00 5/31/2011 - Basic version

———————————————————————————————————————————————

1.01 8/27/2013 - Conﬁguration using driver software "GPSMON" and "PZFMON"

———————————————————————————————————————————————

1.02 1/21/2014 - Time strings updated

———————————————————————————————————————————————

1.03 2/5/2015 - ATIS time string added

———————————————————————————————————————————————

1.04 7/13/2015 - Conﬁguration using driver software "MBGMON"

———————————————————————————————————————————————

1.05 4/21/2016 - Baud rate & framing set to 19200 / 8N1 by default

———————————————————————————————————————————————

1.06 6/28/2018 - Conﬁguration using Meinberg Device Manager as optional

conﬁguration program,

- New illustration and designation of screw terminals

- voltage range, housing information

———————————————————————————————————————————————

2.00 02/22/2023 - Fundamental revision of the manual structure

- Revision history

- Chap. 5 restructured, chap. 6 added

- Conﬁguration process using Meinberg Device Manager updated

2 Date: February 24, 2023 DCF600HS

3 Copyright and Liability Exclusion

Except where otherwise stated, the contents of this document, including text and images of all types and transla-

tions thereof, are the intellectual property and copyright of Meinberg Funkuhren GmbH & Co. KG (“Meinberg”

in the following) and are subject to German copyright law. All reproduction, dissemination, modiﬁcation, or ex-

ploitation is prohibited unless express consent to this eﬀect is provided in writing by Meinberg. The provisions

of copyright law apply accordingly.

Any third-party content in this document has been included in accordance with the rights and with the consent

of its copyright owners.

A non-exclusive license is granted to redistribute this document (for example, on a website oﬀering free-of-

charge access to an archive of product manuals), provided that the document is only distributed in its entirety,

that it is not modiﬁed in any way, that no fee is demanded for access to it, and that this notice is left in its

complete and unchanged form.

At the time of writing of this document, reasonable eﬀort was made to carefully review links to third-party

websites to ensure that they were compliant with the laws of the Federal Republic of Germany and relevant

to the subject matter of the document. Meinberg accepts no liability for the content of websites not created or

maintained by Meinberg, and does not warrant that the content of such external websites is suitable or correct

for any given purpose.

While Meinberg makes every eﬀort to ensure that this document is complete, suitable for purpose, and free

of material errors or omissions, and periodically reviews its library of manuals to reﬂect developments and

changing standards, Meinberg does not warrant that this speciﬁc document is up-to-date, comprehensive, or

free of errors. Updated manuals are provided at www.meinbergglobal.com.

You may also write to techsuppor[email protected] to request an updated version at any time or provide feedback

on errors or suggested improvements, which we are grateful to receive.

Meinberg reserves the right to make changes of any type to this document at any time as is necessary for

the purpose of improving its products and services and ensuring compliance with applicable standards, laws &

regulations.

DCF600HS Date: February 24, 2023 3

4 Introduction

This Setup Guide provides you with step-by-step guidance on how to set up your Meinberg product for the

ﬁrst time.

This compact device is integrated in a plastic enclosure that is designed to be mounted on a DIN rail. It

features four LEDs that provide status information, for example by signaling demodulation of time signal and

indicating the synchronization status of the device.

The DCF600HS radio clock has an RS-232 interface (optionally a RS-485 interface) for communication and

conﬁguration, as well as two optocoupler-isolated programmable pulse outputs in the form of screw terminals.

These output a pulse per second and pulse per minute signal respectively in their default conﬁguration.

The software "Meinberg Device Manager" can be used to output diﬀerent signals through these outputs. The

module is powered by a DC power source via the screw terminals marked VDD and GND.

How It Works

The signal from the DCF77 antenna passes through the antenna connector to a narrowband direct receiver,

which in turn transfers the demodulated time markers to the DCF600HS’s microcontroller. The microcontroller

decodes the time markers provided by the receiver circuit and uses this data to generate accurate date and time

information. If the time data is successfully decoded without any errors, the information is also subjected to a

plausibility check using two consecutive time strings. If this plausibility check is also successful, the internal

software clock is adjusted to the decoded time.

Manual Revisions

Meinberg products are subject to ongoing development even after their market release, with new features

and enhancements added on a regular basis via ﬁrmware and software updates. Meinberg also revises its

product manuals to account for these feature updates.

This version of the manual has been prepared based on the feature set of Firmware Version dcf600_hsrs.300

of your DCF600HS as well as Meinberg Device Manager Version 7.1. When using a diﬀerent software or

ﬁrmware version, there may be noticeable diﬀerences, for example in the presentation and availability of the

status information and options as shown in Chapter 12 ("Conﬁguration of the DCF600HS").

4 Date: February 24, 2023 DCF600HS

5 Presentation Conventions in this Manual

5.1 Conventions for the Presentation of Critical Safety Warnings

Warnings are indicated with the following warning boxes, using the following signal words, colors, and symbols:

Caution!

This signal word indicates a hazard with a low risk level. Such a notice refers to a procedure or other

action that may result in minor injury if not observed or if improperly performed.

Warning!

This signal indicates a hazard with a medium risk level. Such a notice refers to a procedure or other

action that may result in serious injury or even death if not observed or if improperly performed.

Danger!

This signal word indicates a hazard with a high risk level. Such a notice refers to a procedure or

other action that will very likely result in serious injury or even death if not observed or if improperly

performed.

5.2 Secondary Symbols Used in Safety Warnings

Some warning boxes may feature a secondary symbol that emphasizes the deﬁning nature of a hazard or risk.

The presence of an "electrical hazard" symbol is indicative of a risk of electric shock or

lightning strike.

The presence of a "fall hazard" symbol is indicative of a risk of falling when performing

work at height.

Das Symbol "laser hazard" symbol is indicative of a risk relating to laser radiation.

DCF600HS Date: February 24, 2023 5

5.3 Conventions for the Presentation of Other Important Information

Beyond the above safety-related warning boxes, the following warning and information boxes are also used

to indicate risks of product damage, data loss, and information security breaches, and also to provide general

information for the sake of clarity, convenience, and optimum operation:

Important!

Warnings of risks of product damage, data loss, and also information security risks are indicated with

this type of warning box.

Information:

Additional information that may be relevant for improving eﬃciency or avoiding confusion or misunder-

standings is provided in this form.

5.4 Generally Applicable Symbols

The following symbols and pictograms are also used in a broader context in this manual and on the product.

The presence of the "ESD" symbol is indicative of a risk of product damage caused by

electrostatic discharge.

Direct current (DC) (symbol deﬁnition IEC 60417-5031)

Alternating current (AC) (symbol deﬁnition IEC 60417-5032)

Ground connection (symbol deﬁnition IEC 60417-5017)

Protective earth connection (symbol deﬁnition IEC 60417-5019)

6 Date: February 24, 2023 DCF600HS

Andere Handbücher für DCF600HS

Inhaltsverzeichnis

Andere Meinberg Aufnahmegeräte Handbücher

Meinberg

Meinberg microSync HR Series Bedienungsanleitung

Meinberg

Meinberg SyncBox N2X Bedienungsanleitung

Meinberg

Meinberg MicroSync Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX800/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX412/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync HR701/DC Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg MicroSync Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX302/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg C600RS Bedienungsanleitung

Meinberg

Meinberg MicroSync Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX300/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX201/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg MicroSync Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX200/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX311/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg MicroSync Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX800 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg MicroSync Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX102/AD10DC20 Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync HR701/DC Gebrauchs- und Pflegehandbuch

Meinberg

Meinberg microSync RX100/AD10DC20 Gebrauchs- und Pflegehandbuch

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch