Memorex MB123OM Bedienungsanleitung

Keychain Databank

MODEL# MB123

BEFORE OPERATING THIS PRODUCT

PlEASE READ THESE INSTRUCTIONS COMPLETELY

INSTALLATION OF BATTERIES

.Open the battery compartment cover by using a small screwdriver

to remove the screw. e

.lnsert2XGl2 (LR43)1.5V batteries with

tJthe positive (+) and negative (-) ends

facing in the directions indicated

.Replace the cover and screw (see the ] '0otD+diagram of battery replacement) .~

BATTERY PRECAUTION

.Batteries are to be inserted with the correct polarity.

.Exhausted batteries are to be removed from the unit.

.The supply te,",inals are not to be short-circuited.

.Do not mix old and new batteries.

.When not in use, remove batteries from the game unit.

.Do not bury or bum the batteries.

.Only batteries of the same or equivalent types as recommended

are to be used.

.Installation of batteries should tie done by an adult.

I. FEATURES

.Dual time clock

.Telephone directory

.Countdown timer

.Daily ala,",

.Stopwatch

.Security password for telephone directory

.2-minute auto shut-off function In case the counting in Countdown

timer or Stop watch are being used and the corresponding display

is selected, the display will not turn off automatically.

II. KEY FUNCTION

Seven keys are available They are MODE, ENTER, SET, ERASE,

UP, DOWN and RESET

.MODE: Switch on the databank whenever the display is off, or

switCh from one function to another when the databank

is ON. Press and hold MODE for about 3 seconds to

switch off display. The sequence is as follows:

I DUAL I TELEPHONE I COUNT I

I TIME CLOCK I ~ DIRECTORY ~ I DOWN TIME I

~ ~

I SECURITY PASSWORDI<: ISTOP WATCHI Ao I DAILYALARM I

I MODE I IMODE I ...I~~'"' ~~".., I

0ENTER: Confim setting, or Start/Stop countdown timer, or Start/

Stop stopwatch Stop alano and countdown timer ringing

0ERASE: Act as "backspace" while setting Press "Erase" twice

to delete the telephone file on display Press "Erase"

twice to erase the password set while being displayed

0UP For torward setting

Switch between the kJcaltime and secondary time in Dual

lime CkxXmode.

0DOWN: For downward setting, Switch between thelocal time and

secondary time inDual lime CkxX mode

0RESET: clear all data in memory (except those in telephone

directory)

III. FUNCTION DESCRIPTION

A. DUAL TIME CLOCK

The clock is defaulted atAM12 00, 01-01-96, Monday alter battery

is Installed

Set current time & date:

0Select the Dual-time clock

0Press SET to star! setting the clock

oThe input sequence is:12/24 hour fonoat- hour- minute- month-

day- year

0Press UP or DOWN to switch between 12-hour and 24-hour time

Ionnat

0Press ENTER to confino each value

0Alter passing ENTER for year, the entry process ends.

Display patterns for setting mode:

0At the entry of setting mode, symbols "AM" or" .." flash. You

can then press UP or DOWN to switch between 12hr format and

24hr Ionnat

For example:

Il~~=~~j~l1Rtl-i :23:00 I(UP/~) 13:23:00

,~, -I- 1-961-", -1'1-96

Note:

oln 12-hour Ionnat, scroll through the hour digit cycle (AM 12:00 to

PM 12:00 and retumstoAM 12:00 as a cycle) to choose between

AM or PM

olime display format of"secondary time" and "daily alarm" follows

that of current time clock

PressENTERtoconfinnthe Ot- 1.4r:: -.0HOUR display format, the Ii" J ".; ,: -': =-

HOUR digns will be flashing" IZ-Z'f. 9S -

and you can set the hour' -""

accordingly

Alter pressing ENTER for YEAR. the entry process ends and the

"second" value will be changed to zero automatical~.

Set the Secondary Time: }i+:00:00.1000.Select Dual Time Clock V + , :

mode and press UP or ~ I

DOWN till the secondary , .

time is displayed

.Press SET to enter the secondary time setting

.The input sequence is +/-sign -hour difference -minute difference.

.Input the correct time difference Use UP or DOWN to adjust the

value.

.Press ENTER to confinn each value.

.Alter pressing ENTER to confinn "minute difference", the

secondary will be calculated and shown. For example, when local

time isAM 10:45; 12-24-96 and the time difference is +01:30, the

secondary time will be:

IPM12: 15 -l

I" -IZ-Z'f-96 @I

In setting mode, press SET again to reset the time difference to

zero, ie +0000 You may start setting again using the +/. sign.

Edit entry during setting:

.Press ERASE and the previous nem will flash for edning.

B. PASSWORD -SECURITY PASSWORD

.The security password isused tokeep telephone records in secret

.Telephone directory can be read only by entering correct password

first

.The security password can be 1 dign or anycombination of 2 to 4

digns

.The password set comes into effect when the unn turns nself off

You have to decode the password once every time the unn is

woken from sleep mode

Set password:

Press SET tostart password

setting

The first digit is ready for setting

0Press UP or DOWN to scroll for the digit

0Press ENTER to confirm the selected value.

0Press ERASE to edit the previously set digit.

0After pressing ENTER to confirm the 4th digit, press ENTER

without scrolling

Erase password: g

0 Press erase in password t.

mode,the rubber and I ~

asteriskllashlordecoding aI

0Decode the password as described in "Telephone DireckWy

Mode"

C. TELEPHONE DIRECTORY

The telephone directory can store files with at maximum 10

characters for name and 12 digits for telephone number All files

will be sorted in alphanumeric order.

Press MODE to enter into the Telephone Directory "Telephone

Directory" k:on and thefirst file will be displayed ilthere is no securi1y

password set belore use Otherwise, you have to enter password

to access the telephone files as follows:

Decode password

0Press UP or DOWN to select the appropriate digit.

0Press ENTER to confirm.

oil the confirmed digit or digits are to be readjusted, press ERASE

as the backspace command. Then press another appropriate digit

by pressing UP of DOWN

oAfter confirming selected digits, press ENTER once more and

the uni1 will check the password

oil the selected digi1s do not match the password, the "key" icon

and the asterisk will beshown again and the user is required to

re-enter the password The first file will be displayed when the

password iscorrect.

Note:

Ifthere are nofiles, will be displayed at the entry 01Telephone

Directory mode

Search files:

0Press UP or DOWN to search files in alphanumeric order

according to the name

oFor quick searching, press and hold UP or DOWN for more than

2 seconds, the first two of each alphanumeric group will be

displayed in alphanumeric order or in reversed order respectively

oln case there are two (or more) names having the same spelling,

the unit will show the most recently input file first

Input new files:

0Press SET to enter the file entry mode, The indicator 0" .will

be ON andllash as an 'I /

indication It~EMrUtL a j1EMFULL aolf the memory is full, the

following icons wilillash for 3 / I ,

seconds (maximum number of

files is about 60)

olf you want to input new file, erase the unnecessary files first

0Press UP or DOWN to select appropriate character The

alphanumeric order is: A,B,C, Z, space, -, -, 1, 2, 3, ,,9, 0

0Press ENTER to confirm the selected character,

0Press ERASE to erase the confinned characters as the

backspace, command,

oln case of selecting an accent character to scroll for the accent

symbol, Then press ENTER to confirm the symbol selected

0Press UP or DOWN again to scroll lor the character undemeath,

Press ENTER to confinn the character selected (Characters

provided are restricted to those w~h accents)

0Alter entering the whole name, I~~I;R ~~BC BI'press ENTER and start the PETER RBC B

telephone number entry, ~ ,',

oThe scrQlling order is 1, 2, 3, ','

",0,

0Press UP or DOWN to scroll for the appropriate digits.

0Press ENTER to confinn the selected number.

oToconfirm the entire file entry, press ENTER again

Erase file:

0Search the file Which you want to delete.

0Press ERASE and the "Eraser" symbol flashes

0Press ERASE again to delete the displayed file and the next file

will be shown

D. COUNTDOWN TIMER

0The maximum duration for the Countdown timer is 24 hours. Timer

rings when the count down times up

0At the entry of Countdown timer mode, the current countdown

timer duration will be displayed

olt there is no previous setting for Countdown timer, "00:00:00" will

be displayed instead

Set Countdown Timer:

0 PressSET to start setting. The "second" flashes to indicatethe timer

readyor setting.

0The input sequence is second-minute-hour

0Press SET again to zero if necessary

0Press UP or DOWN to increase or decrease the selected value.

0Press ENTER to confim1.

0After pressing ENTER to confim1 "hour", the entry process ends

Use Countdown TImer:

0 Set the timer to the required duration es described above.

0 Press ENTER to toggle the time operation.

0When the countdown timer times up, it rings and the "Timer"

symbol flashes as an indication.

0 Press ENTER once to stop the sound, or the ringing will last for

1 minute.

Atter the timer stops, press ENTER to reset the timer to previous

setting

E. DAILY ALARM

0 The Daily Alarm rings every day as long as it is set and enabled

0After entering into this mode, the "Alam1 Clock" icon and the

alam1 time will be displayed. If there is no previous setting, the

Alam1Time shows AM 12:00 or 00:00

lfalam1isenabled,the IPr-14: 15,:- ~:~S ~Ilsign"»"di~lays. Pt. 14 . 1 c:; .c:;n 61lfaiam1lsdlsabled,1he I "sign "»" is 011 ,- '-95 I

Set alam1:

0 Press SET to start j1~M 8: 00 :~IM 8 00 Ialam1 setting I J' : '~

.f, ".'

.The input sequence is: Enable/Disable. Hour. Minute

.Press UP or DOWN to enable or disable the alarm, and adjust

the hour and minute values

.Press ENTER to confirm each value

.If the alarm isdisabled, the entry process ends

.If the alarm is enabk3d, continue setting by pressing UP or DOWN

to increase or decrease the hour and minute value.

.Press ERASE to edit the previously set value.

.After pressing ENTER to confirm the "minute", the entry process

ends and the alarm isenabled.

Use alarm:

.Set alarm time and enable the alarm When the alarm isenabled,

icon j)" will be shown on the display

.When the current time matches with the alarm time, the alarm

rings

.Press ENTER once to stop the sound, or ringing will last for 1

minute

F.STOPWATCH

After entering into the stop watch mode, the "stopwatch" icon and

the current counting value will be shown Ifit hasn't started or has

been reset, all zero will be shown

Use Stopwatch:

.Press ENTER to start or stop stopwatch.

.If the stopwatch is stopped, press ENTER to restart the counting

from when it is stopped

.When the stopwatch stops, press SET to reset it

Daily Alarm and count down timer ringing will notbe heard but the

corresponding icon will stilillash as an indication

cHemorex'

LIMITED WARRANTY

PERSONAL DRGANIZER

We at MEMOREX believe you will be pleased with your new

Audio Product Please read this Warranty carefully. Memorex

warrants this product to be free from manufacturing defects

including original parts and workmanship for a period of ninety

(00) days from the date of original purchase in, and if used in, the

United States

Should you find your unif is not operating properiy during the

terms offull coverage of thiswarranty, ninety (00) days, you should

contact your original place of purchase for an exchange with a

valid receipt. Ifnecessary, Memorex will provide one of the following

options (at Memorex's discretion), providing the manufacturing

defect is verified along with the date of purchase.

-Repair service for ninety (00) days from the date of original

purchase at no charge for labor and parts

-Replacement of your defective unit with either a new, refurbished,

or equivalent model at no charge for ninety (90) days from the

date of original purchase.

This warranty is void ifthe product is:

A) Damaged through negligence, abuse, misuse, accident, or

acts ot God.

B) Used in commercial applications or rentals

C) Modified or repaired by anyone other than Memorexor their

expressly authorized representative.

D) Demege re$ulting from the improper connection to equipment

of other manufacturers.

This werranty does not cover

A) Cost incurred in the shipping of the product 10and from the

Memorex authorized repair facility listed.

B) Damage or improper operation caused by the failure to follow

the operating instructions provided with the product

C) Routine adjustments to the product which canbe performed by

the customer as outlined in the owner's manual.

D) Products not purchased in the United States

E) Damage to the products used outside the United Stiltes

In the event that service is required under this warranty, please

call our toll free numl\er at 1-800-919-3647 for instructions

[rt1,

I ,

'. ..'..~-~~- ~

HI",ean."L""VI'

@1999 Memorex is" trademark of Memo,exTelex. N V

Prinfedin Hong Kong

Visitour webslte at www.memorex.com

Customer Service1-800-919-3647

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Memorex Lagerung Handbücher

Memorex

Memorex 32702120 - Ultra TravelDrive 120 GB External Hard... Bedienungsanleitung

Memorex

Memorex 660-1 Bedienungsanleitung

Memorex

Memorex TravelDrive USB Flash Drive Bedienungsanleitung

Memorex

Memorex traveldrive Bedienungsanleitung

Memorex

Memorex 32601080 - Mega TravelDrive 8 GB External Hard... Bedienungsanleitung

Memorex

Memorex 32020012483 Bedienungsanleitung

Memorex

Memorex M-Flyer Bedienungsanleitung

Memorex

Memorex traveldrive Bedienungsanleitung

Memorex

Memorex TravelDrive USB 2.0 Bedienungsanleitung

Memorex

Memorex 32509380 - Mega TravelDrive 4 GB External Hard... Bedienungsanleitung

Memorex

Memorex 660-1 Bedienungsanleitung

Memorex

Memorex 53958662 Bedienungsanleitung

Memorex

Memorex thumbdrive Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

HP P9000 Bedienungsanleitung