Mercury XR2 Bedienungsanleitung

XR2 XR2 SS

1998, Mercury Marine90Ć848717980 298

for your purchase of one of the finest outboards available.

You have made a sound investment in boating pleasure.

Your outboard has been manufactured by Mercury Ma-

rine, a world leader in marine technology and outboard

manufacturing since 1939. These years of experience

have been committed to the goal of producing the finest

quality products. This led to Mercury Marine’s reputation

for strict quality control, excellence, durability, lasting per-

formance and being the best at providing after-the-sale

support.

Please read this manual carefully before operating your

outboard. This manual has been prepared to assist you in

the operation, safe use and care of your outboard.

All of us at Mercury Marine took pride in building your out-

board and wish you many years of happy and safe boat-

ing.

Again, thank you for your confidence in Mercury Marine.

Mercury Hi-Performance,

N7480 County Road “UU”

Fond du Lac, WI 54935-9585

TABLE OF CONTENTS

General Information

Boater’s Responsibilities 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before Operating Your Outboard 4. . . . . . . . . . . . . . . . . . . . . . . . .

Boat Horsepower Capacity 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

High-Speed And High-Performance Boat Operation 5. . . . . . . . .

Outboard Remote Control 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remote Steering Notice 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lanyard Stop Switch 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Protecting People In The Water 10. . . . . . . . . . . . . . . . . . . . . . . . .

Exhaust Emissions 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting Accessories For Your Outboard 13. . . . . . . . . . . . . . . .

Safe Boating Suggestions 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Recording Serial Number 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Torque Requirements 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Component Identification 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation

Installing Outboard 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Propeller Selection 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Transporting

Trailering Boat/Outboard 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fuel & Oil

Gasoline Recommendations 22. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Oil Recommendation 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gasoline/Oil Mixture 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Filling Fuel Tank 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Features & Controls

Remote Control Features 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warning System 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Trim And Tilt 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(continued on next page)

TABLE OF CONTENTS

Operation

Pre-Starting Check List 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Special Operating Instructions 31. . . . . . . . . . . . . . . . . . . . . . . . . .

Engine Break-in Procedure 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Starting The Engine 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gear Shifting 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stopping The Engine 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance

Outboard Care 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting Replacement Parts For Your Outboard 38. . . . . . . . . .

EPA Emissions Regulations 38. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inspection And Maintenance Schedule 39. . . . . . . . . . . . . . . . . . .

Flushing The Cooling System 41. . . . . . . . . . . . . . . . . . . . . . . . . . .

Top Cowl Removal And Installation 42. . . . . . . . . . . . . . . . . . . . . .

Fuel System 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Steering Link Rod Fasteners 45. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Corrosion Control Anode 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Propeller Replacement 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Spark Plug Inspection 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Battery Inspection 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lubrication Points 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Checking Power Trim Fluid 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gear Case Lubrication 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Submerged Outboard 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage

Storage Preparation 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fuel System 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Protecting Internal Engine Components 56. . . . . . . . . . . . . . . . . .

Protecting External Engine Components 56. . . . . . . . . . . . . . . . .

Gear Case 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Battery Storage 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(continued on next page)

TABLE OF CONTENTS

Troubleshooting 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Engine Wiring Diagram 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance Log 61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The description and specifications contained herein were in effect at

the time this manual was approved for printing. Mercury Marine,

whose policy is one of continued improvement, reserves the right to

discontinue models at any time, to change specifications, designs,

methods, or procedures without notice or incurring obligation.

Mercury Marine, Fond du Lac, Wisconsin U.S.A. Litho in U.S.A.

1998 Mercury Marine

Following are registered trademarks of Brunswick Corporation: AutoBlend,

Force, Jet-Prop, Mariner, Merc, MerCathode, MerCruiser, Mercury,

Mercury Marine, Mercury Hi-Performance, Quicksilver, RideGuide and

Thruster

GENERAL INFORMATION

oba1

Boater’s Responsibilities

The operator (driver) is responsible for the correct and safe operation

of the boat and safety of its occupants and general public. It is strong-

ly recommended that each operator (driver) read and understand

this entire manual before operating the outboard.

Be sure at least one additional person on board is instructed in the

basics of starting and operating the outboard and boat handling in

case the driver is unable to operate the boat.

obb1

Before Operating Your Outboard

Read this manual carefully. Learn how to operate your outboard

properly. If you have any questions, contact your dealer.

Safety and operating information that is practiced along with using

good common sense can help prevent personal injury and product

damage.

This manual as well as safety labels posted on the outboard use the

following safety alerts to draw your attention to special safety instruc-

tions that should be followed.

DANGER

DANGER – Immediate hazards which WILL result in severe

personal injury or death.

WARNING

WARNING – Hazards or unsafe practices which COULD result

in severe personal injury or death.

CAUTION

CAUTION – Hazards or unsafe practices which could result in

minor injury or product or property damage.

GENERAL INFORMATION

U.S. COAST GUARD CAPACITY

MAXIMUM HORSEPOWER XXX

MAXIMUM PERSON

CAPACITY (POUNDS) XXX

MAXIMUM WEIGHT

CAPACITY XXX

obc1

Boat Horsepower Capacity

1Do not overpower or overload your boat. Most boats will carry a

required capacity plate indicating the maximum acceptable pow-

er and load as determined by the manufacturer following certain

federal guidelines. If in doubt, contact your dealer or the boat

manufacturer.

WARNING

Using an outboard that exceeds the maximum horsepower

limit of a boat can: 1. cause loss of boat control 2. place too

much weight at the transom altering the designed flotation

characteristics of the boat or 3. cause the boat to break apart

particularly around the transom area. Overpowering a boat

can result in serious injury, death, or boat damage.

hbd1

High-Speed And High-Performance Boat

Operation

2If your outboard is to be used on a high-speed or high-perfor-

mance boat with which you are unfamiliar, we recommend that

you never operate it at its high speed capability without first re-

questing an initial orientation and familiarization demonstration

ride with your dealer or an operator experienced with your boat/

outboard combination. For additional information, read the

“Guide to Hi-Performance Boat Operation” booklet included in

your literature package.

GENERAL INFORMATION

21 a

obe1

Outboard Remote Control

1The remote control connected to your outboard must be

equipped with a start-in-gear protection device. This prevents the

engine from starting when the outboard is in gear.

WARNING

Avoid serious injury or death from a sudden unexpected ac-

celeration when starting your engine. The design of this out-

board requires that the remote control used with it must have

a built in start-in-gear protection device.

obf1

Remote Steering Notice

2The steering link rod that connects the steering cable to the en-

gine must be fastened utilizing self-locking nuts (a). These self-

locking nuts must never be replaced with common nuts (non

locking) as they will work loose and vibrate off, freeing the link rod

to disengage.

WARNING

Disengagement of a steering link rod can result in the boat tak-

ing a full, sudden, sharp turn. This potentially violent action

can cause occupants to be thrown overboard exposing them

to serious injury or death.

GENERAL INFORMATION

hbg1

Lanyard Stop Switch

1The purpose of a lanyard stop switch is to turn off the engine

when the operator moves far enough away from the operator’s

position (as in accidental ejection from the operator’s position) to

activate the switch. Tiller handle outboards and some remote

control units are equipped with a lanyard stop switch. A lanyard

stop switch can be installed as an accessory – generally on the

dashboard or side adjacent to the operator’s position.

2The lanyard is a cord usually between 4 and 5 feet (1220 and

1524 mm) in length when stretched out with an element on one

end made to be inserted into the switch and a snap on the other

end for attaching to the operator. The lanyard is coiled to make

its at-rest condition as short as possible so as to minimize the li-

kelihood of lanyard entanglement with nearby objects. It is made

as long as it is in its stretched condition to minimize the likelihood

of accidental activation should the operator choose to move

around in an area close to the normal operator’s position. If it is

desired to have a shorter lanyard, wrap the lanyard around the

operator’s wrist or leg, or tie a knot in the lanyard.

Read the following Safety Information before proceeding.

(continued on next page)

GENERAL INFORMATION

Lanyard Stop Switch (Continued)

Read the following Safety Information before proceeding.

Important Safety Information: The purpose of a lanyard stop

switch is to stop the engine when the operator moves far enough

away from the operator’s position to activate the switch. This would

occur if the operator accidentally falls overboard or moves within the

boat a sufficient distance from the operator’s position. Accidental

ejections and falls overboard are more likely to occur in certain types

of boats such as low sided inflatables or bass boats, high-perfor-

mance boats and light, sensitive-handling fishing boats operated by

hand-tiller. Accidental ejections and falls overboard are also likely to

occur as a result of poor operating practices such as sitting on the

back of the seat or gunwale at planing speeds, standing at planing

speeds, sitting on elevated fishing boat decks, operating at planing

speeds in shallow or obstacle-infested waters, releasing your grip on

a steering wheel or tiller handle that is pulling in one direction, drink-

ing alcohol or consuming drugs, or daring, high-speed boat maneu-

vers.

While activation of the lanyard stop switch will stop the engine im-

mediately, a boat will continue to coast for some distance depending

upon the velocity and degree of any turn at shut-down. However, the

boat will not complete a full circle. While the boat is coasting, it can

cause injury to anyone in the boat’s path as seriously as the boat

would when under power.

We strongly recommend that other occupants be instructed on prop-

er starting and operating procedures should they be required to oper-

ate the engine in an emergency (e.g. if the operator is accidentally

ejected).

!WARNING

Should the operator fall out of the boat, the possibility of

serious injury or death from being run over by the boat

can be greatly reduced by stopping the engine immediate-

ly. Always properly connect both ends of the stop switch

lanyard – to the stop switch and the operator.

(continued on next page)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mercury Außenbordmotor Handbücher

Mercury

Mercury 50 4-Stroke Bedienungsanleitung

Mercury

Mercury 20 Jet Bedienungsanleitung

Mercury

Mercury 135 Pro XS OptiMax Bedienungsanleitung

Mercury

Mercury 140 Bedienungsanleitung

Mercury

Mercury OUTBOARD MOTOR Bedienungsanleitung

Mercury

Mercury 60 FourStroke EFI Formula Race Bedienungsanleitung

Mercury

Mercury 200 OptiMax Jet Drive Bedienungsanleitung

Mercury

Mercury 2.5 TwoStroke Bedienungsanleitung

Mercury

Mercury 200 OptiMax DTS Bedienungsanleitung

Mercury

Mercury Optimax 135 Bedienungsanleitung

Mercury

Mercury 4-Stroke 9.9 HP Bedienungsanleitung

Mercury

Mercury FourStroke 8 Bedienungsanleitung

Mercury

Mercury CT60 Bedienungsanleitung

Mercury

Mercury 40 FourStroke Bedienungsanleitung

Mercury

Mercury 40 FourStroke Bedienungsanleitung

Mercury

Mercury 40 jet fourstroke Bedienungsanleitung

Mercury

Mercury 40 FourStroke Bedienungsanleitung

Mercury

Mercury 200 Verado FourStroke Installationsanleitung

Mercury

Mercury 200 Optimax Bedienungsanleitung

Mercury

Mercury 75 Bedienungsanleitung

Mercury

Mercury HP700 SCi Bedienungsanleitung

Mercury

Mercury FourStroke 2.5 Bedienungsanleitung

Mercury

Mercury 250 3 Litre Bedienungsanleitung

Mercury

Mercury 4.5 Bedienungsanleitung

Beliebte Außenbordmotor Handbücher anderer Marken

Yamaha

Yamaha VF150 Bedienungsanleitung

Sleipner

Sleipner SEP-IP30 Bedienungsanleitung

Suzuki

Suzuki DF 40 Bedienungsanleitung

SELVA MARINE

SELVA MARINE Corse Bedienungsanleitung

TOHATSU

TOHATSU BFT 250A Bedienungsanleitung

KONRAD

KONRAD Series 600B Bedienungsanleitung

Sleipner

Sleipner E-Vision Electric Thruster E300 Bedienungsanleitung

Suzuki

Suzuki DF40A Bedienungsanleitung

IST

IST 18.BF200D Bedienungsanleitung

Side-Power

Side-Power SP 155 TC i Bedienungsanleitung

Quick

Quick BTR250 Bedienungsanleitung

Yamaha

Yamaha VF90 Bedienungsanleitung

Yamaha

Yamaha D150H Bedienungsanleitung

Yanmar

Yanmar ZT350 series Bedienungsanleitung

MotorGuide

MotorGuide X3-40 Bedienungsanleitung

Yamaha

Yamaha 20D Bedienungsanleitung

Torqeedo

Torqeedo Ultralight 403 Bedienungsanleitung

Vetus

Vetus BOWPRO65 Bedienungsanleitung