Introduction
1
About the MSR+
The MSR+ is an advanced remote control that provides a
comprehensive range of commands to allow you to control every
product in your Meridian system straight out of the box. You can
also program it to control your other equipment.
The MSR+ provides a total of 51 keys to give access to all the
most frequently used commands of your Meridian products, and
a Function (or shift) key for additional less frequently needed
operations.
Interchangeable Meridian source keys
For easy selection of sources the MSR+ provides 12 source keys
corresponding to the sources provided by the Meridian digital
surround controllers, preamplifiers, and integrated amplifiers.
The MSR+ is provided with a selection of alternative keycaps
for the source keys which you can use to match the particular
combination of units in your system. For example, if you own a
DVDR, you can change the keycaps to provide a DVDR key.
Control your other equipment
The MSR+ is pre-programmed to mimic the remote controls for
many popular audio and video products from other manufacturers,
and you can configure it to control up to nine other products
simply by entering the appropriate device code on the numeric
keypad. A complete list of the supported products is given at the
back of this manual.
Learning commands
Even if you own a product that is not supported by the device
library built in to the MSR+, it includes a learning mode which
allows it to learn up to 120 commands from other remote controls
and assign them to a key on the MSR+.
Backlight
For convenience the MSR+ keypad is backlit, so you can use it even
in low-light conditions. The backlight automatically turns on as
soon as you press a key in low light conditions.
The MSR+ will have a battery life of over six months under normal
conditions; slightly less if you use the backlight frequently.
Introduction
G Series MSR 1 7/7/03, 3:16:23 pm
