METAKOM MK20.2-RF Bedienungsanleitung

OUTDOOR PANEL

METAKOM

MK20.2-RF(MF)

PASSPORT

USER`S MANUAL

www.metakom.ru

Valid for filling

CONTENTS

To be completed by the repair company

Contents of the repair. Name and number according to the

scheme of the replaced part or unit. The place and

nature of the defect:

1. PURPOSE

DISTINCTIVE FEATURES

OPERATING FUNCTIONS

SELF-TEST

TECHNICAL SPECIFICATIONS

INSTALLATION PROCEDURE

PREPARATION FOR WORK

7.1

OUTDOOR PANEL PROGRAMMING MODE

7.2

ENTER THE PROGRAMMING MODE

7.3

DESCRIPTION OF THE SECTIONS OF THE

PROGRAMMING MODE

USER`S USE OF THE OUTDOOR PANEL

TRANSPORTATION AND STORAGE

10.

MANUFACTURER'S WARRANTY

Signature of the person who carried out repairs ________________

11.

OUTDOOR PANEL COMPLETENESS

APPENDIX 1

Date of repair ______________________________________

(date, month, year)

Signature of the owner of the product, confirming the repair

___________________________

Repair company stamp with the city:

1.PURPOSE

The METAKOM outdoor panel MK20.2-RF (MF) (hereinafter doorphone)

represents a specialized microprocessor system intended for installation in multi-

apartment buildings, offices, as well as for organizing a selective communication

system with up to 20 subscribers.

Modification of the outdoor panel METAKOM MK20.2-RF has a built-in

scanner of contactless RFID keys with an operating frequency of 125 kHz.

Modification of the outdoor panel METAKOM MK20.2-MF has a built-in

scanner of Mifare contactless keys with a working frequency of 13.6 MHz.

As user keys in the modification of METAKOM MK20.2-RF, the contactless

trinkets METAKOM supporting Proximity technology (hereinafter RF-keys) are used.

For the modification of METAKOM MK20.2-MF, the contactless METAKOM trinkets

supporting Mifare technology (hereinafter MF-keys) are used. MF-keys have a special

identification number coding system. The built-in MF reader supports the work

with factory-integrated key trinkets.

As terminal devices installed for the subscribers, we recommend TKP-01, TKP-

05M, TKP-05M, TKP-10M, TKP-10M, TKP-12M, TKP-14M or other interphone

handset type TKP-01, designed for doorphones with coordinate addressing system for

the production of METAKOM.

The doorphone provides a call signal to the user's TKP, a duplex connection of

the visitor to the subscriber, remote opening of the lock upon a signal from the TKP.

The lock can also be opened with the RF (MF)-key, using the code dialed on the

call unit, or by pressing the EXIT button installed at the entrance door inside the

entrance.

To enable the use of different types of locks, the METAKOM MK20.2-RF (MF)

outdoor panel is available in two versions:

Full name of the

Lock type

Terminal marking of

Description of the

model

terminal blocks

output node

Electromagnetic

lock without

control board

LOCK - a line

normally closed to the

common lock wire

GND

Powerful key

transistor. When you

open the lock, it turns

off

МК20.2-RF(MF)Е

Electromechanic

lock without

control board

LOCK –a line

normally open to the

common lock wire

GND

Powerful key

transistor. When you

open the lock, it turns

on.

МК20.2-RF(MF)М

Valid for filling

Tear-off coupon N2

For the warranty repair of the outdoor panel

МЕТАКОМ МК20.2-RF(MF)

To be completed by the manufacturer

Serial number of the product ___________________________

Release date_____________________________________

(date, month, year)

(QC stamp)

Representative of the QC of the manufacturer

_________________________

Address for return of the coupon to the manufacturer:

Russia, 241024, Bryansk city, Delegate street, 68, LTD “Metakom”

To be completed by a trade or installation organization

Sale date _____________________________________

Штамп торговой организации:

(date, month, year)

Seller ________________________________________

(signature or stamp)

Date of commissioning __________________________

(date, month, year)

Installer_______________________________________

(signature or stamp)

The stamp of the organization that conducted the installation:

Valid for filling

To be completed by the repair company

Contents of the repair. Name and number according to the scheme of the replaced

part or unit. Place and nature of the defect:

Signature of the person who carried out repairs ________________

Date of repair ______________________________________

(date, month, year)

Signature of the owner of the product, confirming the repair ___________________________

Stamp of repair company with the city:

The output stage with a transistor is designed for direct control of the lock winding

without the use of any additional control board or demagnetization.

The power supply of the call and lock unit can be provided from the METAKOM

BP-2U power supply.

The full name of the calling panel consists of the following elements:

МК20.2 – RF

E V N

---------- ----

МК20.2

- model number;

RF(MF)

- Support for METAKOM contactless remote controls;

- for electromagnetic lock,

- for electromechanical lock,

- Built-in video camera and infrared illumination,

{пробел}

- without video camera,

- The doorphone supports networking.

2. Distinctive features

Direct addressing of subscribers;

Built-in switch for 10 subscribers;

2 ringer volume levels, 3 ringtones;

Auto-collection of keys mode;

In the MF modification, user keys are used with the encoding of

the identification number (the keys are coded in the

manufacturer);

Transfer of all the doorphone settings to a personal computer (or

another doorphone) and back via the METAKOM adapter MKA-

02U and the TM-key DS1996 (L). It is possible to configure all

modes of operation of the doorphone and input subscriber RF

(MF) -keys using a personal computer (PC) in a comfortable

laboratory environment. The information is transferred to the

nonvolatile memory of the outdoor panel. A copy of this

information is stored on the PC and used for subsequent

servicing;

Possibility of the organization of interphone network type 1

Master / 16 Slave (one main input, 16 additional);

The possibility of diagnosing the system during commissioning

(testing the hands-on subscriber with the output of the audio line

parameters on the LED backlight);

Correction of the parameters for determining the tube position

for each subscriber separately (the adjustment can be carried out

for each subscriber separately);

Vandal-proof design - special keypad design, installation on site

with a special key;

Waterproof keyboard with illumination of each key, illumination

of the key reader;

Return to the outdoor panel factory settings, while storing

recorded keys;

Self-test on power up or on reset.

Корешокотрывного талона N1на гарантийн ыйремонтблока в ызова МЕТАКОМ МК20.2-RF (MF)Линияотреза

Valid for filling

Tear-off coupon N1

For the warranty repair of the outdoor panel

МЕТАКОМ МК20.2-RF (MF)

To be completed by the manufacturer

Serial number of the product ___________________________

Release date _____________________________________

(date, month, year)

Representative of the QC of the manufacturer

_________________________

(QC stamp)

Address for return of the coupon to the manufacturer:

Russia, 241024, Bryansk city, Delegate street, 68, LTD

“Metakom”

To be completed by a trade or installation organization

Sale date _____________________________________

(date, month, year)

Seller ________________________________________

(signature or stamp)

Stamp of the trade organization:

Date of commissioning __________________________

(date, month, year)

Installer_______________________________________

(signature or stamp)

The stamp of the organization that conducted the installation:

Annex 1.

Code tables.

Table №1

№ ap.

Code

0529

7970

8740

1362

9813

4966

8801

2433

0899

2307

4628

0278

3352

6961

9538

3923

0356

9077

4727

2039

Table №7

№ ap.

Code

2065

4627

3605

0053

9542

0102

5488

6273

5266

8436

6149

4118

0039

2338

0819

2643

4723

0358

6549

6135

3. Operating functions

Indication of modes of operation by backlighting the

buttons of the keyboard;

Sound control of button pressing;

Call the subscriber by pressing a button on the call unit;

Sound control of making a call to the subscriber (sending a

ringing tone of another tonality, if the subscriber's handset

is not packed);

Duplex communication subscriber-visitor;

Remote lock opening from the subscriber's TKP;

Local lock opening by a set of a general or individual

access code;

Local lock opening by an individual RF (MF) key;

Local lock opening from the entrance by pressing the

EXIT button;

Sound signaling the use of an individual user code or RF

(MF)-key on the TKP of the corresponding subscriber

(function included on request);

Ability to prohibit the maintenance of the user's TKP while

maintaining access to the individual code;

Code lock operation in common code mode, in individual

codes mode or jointly (programmable);

Adjustment of all parameters of work for the complete

conformity to the requirements shown on a place of

installation;

Use the master RF (MF) key to quickly enter the

programming mode.

4.Self-test

When the power supply of the call unit is turned on, a self-test procedure is performed.

When an error is detected, an appropriate sound signal and a light indication are

output.

If the EEPROM chip fails to initialize, the button illumination flashes 2 times. If the

error is caused by the fact that a new (or previously used in the other device) EEPROM

was installed, perform a full initialization of the EEPROM (see section 7.3). If the

error message continues to appear - replace the EEPROM chip.

If a key fault is detected, the button illumination flashes 3 times, its operation is

blocked, and the function of opening the door lock from the exit button and RF (MF) -

keys is operable.

When the audio line is shorted, an error signal sounds and a twofold flashing of the

button illumination, an error signal sounds when the line is broken and the button

illumination flashes once.

10. WARRANTY OF THE

MANUFACTURER

The manufacturer guarantees the compliance of the METAKOM MK20.2-RF outdoor

panel (METAKOM MK10.2-MF) with the requirements of MTCM.420570.004 TU when

the user applies the rules of use, storage and transportation.

Warranty period - 12 months from the date of sale, but not more than 18 months from the

date of manufacture. Service life is 5 years from the date of manufacture.

Without presentation of a coupon for warranty repair and (or) violation of the integrity of

seals, mechanical, electrical or other types of damage caused by improper transportation,

storage, operations or actions of third parties, no claims for quality are accepted and no

warranty repair is performed.

Manufacturer's address:

Russia, 241024, Bryansk city, Delegate street, 68,

LTD "Metakom"

Tel / fax: (4832) 68-28-26

Tel. (4832) 68-37-95

http://www.metakom.ru

E-mail: [email protected]

11. OUTDOOR PANEL COMPLETENESS

Outdoor

panel.................................

1 pc.

Passport........................................

1 pc.

Fixing kit.................................

1 pc.

Special key................................

1pc.

Packing box........................

1 pc.

The product is certified

8. USER`S USE OF THE OUTDOOR PANEL

After power on, the doorphone is in standby mode. Subscriber numbers are

highlighted in red.

After pressing the user number button, the visitor establishes a connection with the

user's TKP and provides the set number of call signals. If the subscriber does not pick up the

handset, after the set number of ring signals has been exhausted, the call unit returns to

standby mode. When the receiver is off, the call signals are given in a different key. In this

case, the subscriber needs to hang up, wait for the call signal of another tone and lift the

handset.

When the subscriber picks up the handset, the highlight of the corresponding user's

number changes to green, the connection with the subscriber is established and the visitor

can talk.

The lock is opened by pressing the button on the TKP of the subscriber. This turns on

the highlighting of all subscriber numbers in green.

If the subscriber has hung up, the conversation is interrupted and the call unit returns

to standby. You can also interrupt the conversation by pressing any button on the outdoor

panel.After the set time limit has expired, the conversation will be interrupted automatically

(see section 7.).

If the function of "general" or "individual" codes is activated, then to enter the code

for door opening you must press and hold any button until two sound signals appear. After

that, it is necessary to enter the code on the left side of the keyboard (factory general code is

1234, the individual code is taken from the table). If the code is entered correctly, the lock is

opened.

If the network protocol is activated, then at the time of a network call, the number

illumination goes out. When the connection with the subscriber is established, the

numbering of the numbers in red will flash. In this case, dialing the number on the

keyboard is blocked. The door is opened by the exit button or stored in the memory of the

RF (MF) key.

9.Transportation and storage

Packaged products can be transported by all types of transport, except unpressurized

aircraft compartments and open decks of ships and ships, in accordance with the rules for the

carriage of goods operating on this type of transport.

As a transport container the wooden boxes are used, the group and other containers,

ensuring the safety of the goods during transportation.

Products should be stored only in a packaged form when there are no acidic, alkaline

or other aggressive impurities in the surrounding air.

5. TECHNICAL

SPECIFICATIONS

Maximum resistance of the entrance access line

Maximum number of subscribers served

Maximum subscriber number (for network version)

Maximum number of RF (MF) keys

Number of RF (MF) keys per apartment

Offset of subscriber numbers (for network version)

Number of ringing signals applied to the TKP

Lock opening duration

Restriction of the conversation duration

Maximum number of individual codes

Maximum number of the code table

Number of subscriber code digits

Number of the total code digits

Number of the master code digits

Operating temperature range

Relative humidity (at 35 ° C)

Supply voltage (DC)

Maximum current consumption in standby mode (without

a video camera), max

Peak consumption current (when a call signal is applied to a

subscriber's TKP)

Overall dimensions of the block, max (height x width x thickness)

Block weight without package, max

*- when using multiple switches

** - programmable parameter.

***- for modifications with index "V" operating temperature range -10 ... + 40 ° C.

Max 30 Ohm

999

975

To 975

1...999**

2…62**

2…100 sec.**

40…240 sec.**

255

-30…+40°C***

95%

15…18V

200 мА

260 мА

180 x 202 x 40 mm.

0,8 kg.

6.INSTALLATION PROCEDURE

ATTENTION! There is a dangerous voltage in the power supply - 220V. Do not

perform installation and maintenance work with the power turned on. In the

outdoor panel and other doorphone devices, except for the power supply unit,

there are no voltages exceeding 18V.

The following sequence of actions is recommended:

1. Carefully study this instruction manual and block diagram.

2. Prepare a niche for installing the outdoor panel (see the markup in Figure 1).

3. Install the power supply, the lock and the opening button from the room. Connect the

outdoor panel housing to the protective ground tire.

4. Set the interphone handsets in the apartments (TKP).

5. Install the wiring. Make taps from the loops and connect the TKP of all the subscribers.

(Figure 2)

6. Check that the connections are correct.

7. Turn on the power, the button illumination in red should turn on, enter the programming

mode (see section 7.2) and perform the following actions:

A) Change the access code to the programming mode and, if necessary, program the master

RF (MF) key. Be careful when entering the code. WRITE MASTER CODE!

B) If necessary, set the shift of the subscriber numbers range (see section 7.3). This

parameter should always be set first, since all further operations with subscriber numbers

will depend on the set offset.

C) Program subscriber RF (MF) -keys.

D) If the doorphone will be used on the network, it is necessary to enter the number of the

first subscriber, the network number (from 1 to 16), the number of subscribers served (see

section 7.3). Attention! If the first subscriber number is entered different from "1", then the

offset of the subscriber numbers must be taken into account when setting the next

parameters. As the Master doorphone, the outdoor panel МК2003.2-ТМ(RF)4Е(V)Ncan be

used.

E) If a common code is used in the code lock mode, then change the common code and

switch the outdoor panel to the common code mode. Write down the general code (see

section 7.3).

F) If individual codes are used, create a code table. (See section 7.3). Record the code table

number.

G) If necessary, change the duration of the ringing signal, the duration of the lock opening,

the duration of the call restriction, and so on. Factory settings in most cases are optimal.

NOTE: Items a ... g can be pre-made using a personal computer. In this case, the prepared

information is transferred to the outdoor panel memory via the METAKOM MKA-02U

adapter and the TM-key DS1996 (L).

8. Check the operation of the call unit in the intercom mode and in the code lock mode.

9. Secure the outdoor panel to a previously prepared niche using the supplied hardware

kit.

you must set the network number of the doorphone. It can be from 1 to 16. The network

number is set in accordance with the subscriber numbers being serviced, i.e., the intercom

with the network number "1" will serve the initial numbers of the subscribers, and with the

network number "16" - the last numbers of the subscribers.

Chapter №27 Number of user`s served.

Used to set the number of subscribers served. It is set if the number of

subscribers served by an intercom is less than 20.

Chapter №29 Sound signal melody selection.

It is used to set one of 3 options for the sound signal of a call. After

entering the section to select the first melody, you need to dial "1" "B", the

second - "2" "B", the third - "3" "B".

Warning: be sure to wait for the correct termination of the record, otherwise

later when reading incorrect information in the work of the outdoor panel there may

be failures.

Chapter №22 Reading the electronic media DS1996 (L)

Used to transfer information from the memory of the outdoor panel to the TM-key

DS1996 (L). To transfer information, it is necessary to connect the reader (KTM-1P key

reader) to the terminal blocks "TM" and "GND".

To read data from the DS1996 (L), press "1". Then attach the key DS1996 (L) to

the reader, the data transfer will begin. If an error occurs, an error signal will sound. A

sign of the end of the transfer of information is the audio signal of the end of the

recording and the highlight of the right row of buttons in green.

Warning: be sure to wait until the reading is completed correctly, otherwise

the outdoor panel may fail.

Chapter №23 Changing the system code

Used to change the access code to programming mode. After entering the

section, you must type "1", then type the new system code. After dialing the 6th

digit, the new code will be automatically saved.

Chapter №24 Master key recording

Used to record a master key intended for a fast entry into the

programming mode. After entering the section, it is necessary to press: "1" - to

record the master key, "0" - to delete the master key. After entering the

recording mode, you must attach the key to the reader, if the key is red

correctly, the master key will be recorded.

Chapter №25 Return to factory settings.

Used to set the factory settings. After entering the section, you need to

press "1" to confirm the installation, then the parameters will be changed

automatically, and the key database will not change.

Chapter №26 Enabling the Network Protocol

Used to disable the network protocol or set the network number of the

doorphone working on the network. To disable the network protocol, you must

press "0", to enable the network protocol.

10. In versions of the outdoor panel with index V, the built-in video camera can be

powered from external or internal voltage of 12V. For power supply from the internal

source, the terminals "+ UV" and "+ 12V" must be closed.

11. Make a note in the tear-off coupons about the date of commissioning the unit.

If the volume of the call is insufficient, adjust the required parameters (microphone

sensitivity and speaker volume) with trim resistors on the back of the call unit.

If possible, install the power supply in the boxes, niches, at the ceiling. The power

supply must be installed within 15 meters of the outdoor panel. The "EXIT" button

provides opening of the lock when leaving the entrance and is installed near the entrance

door inside the entrance.

To reduce the influence of climatic factors (low temperature, high humidity, frost,

dew), the outdoor panel and the lock should be installed on the second door of the

entrance located in the vestibule.

The cross-sections of the wires connecting the power supply unit to the outdoor

panel and the lock must be at least 0.35 mm2 (KSPV 2х0.64 or CVVC 2х0.5), the rest -

not less than 0.12 mm2. As a connecting wire, it is recommended to use a wire with

colored insulation of cores. To reduce the influence of external influences, the

connection is recommended to be carried out with a shielded cable. For installation of

video equipment use a coaxial cable of the type RK-75.

For doorphones MK20.2 with a network function when installing a digital line

(AV), use a twisted pair. On long communication lines on the "Master" and the last

"Slave" doorphone, install 120 ohm resistors between the terminals AB.

The "+" terminal of the TKP is connected to the bus of tens, and the "-" TKP is

connected to the bus of units. Before connecting the TKP, the line must be checked for a

short circuit. Line resistance should not exceed 30 ohms.

There is protection against short circuit of the line in the doorphone. At this time,

communication with the TKP will be impossible. All other functions are available.

Installation of other doorphone units is carried out in accordance with the passports for

these units.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung