Metra Electronics ELS Bedienungsanleitung

Locker Controller ELS & ELS SELECT Technical Manual

Page 2

Locker Controller ELS & ELS SELECT Technical Manual

Table of contents

Locker Controller ELS & ELS SELECT Technical Manual........................................................................... 4

Product description............................................................................................................................. 4

Basic Parts ........................................................................................................................................... 5

Locker Controller PCB with two extension modules and connecting PCB ..................................... 5

Display............................................................................................................................................. 5

Emergency Open Push-button (optional)....................................................................................... 6

Coin acceptor (optional) ................................................................................................................. 6

Fingerprint module (optional) ........................................................................................................ 6

Connections ........................................................................................................................................ 6

Connecting Locker Extension Modules........................................................................................... 7

Locker Extension Module setting ................................................................................................... 8

Connecting Electronic Locks ........................................................................................................... 8

Display connection.......................................................................................................................... 9

Power supply connection (Locker Controller without distribution board) .................................. 10

Power supply connection (Locker Controller with distribution board)........................................ 10

Metra NET Network connection (Locker Controller without distribution board)........................ 11

Metra NET Network connection (Locker Controller with distribution board) ............................. 12

Coin Acceptor connection ............................................................................................................ 13

External emergency open pushbutton connection (optional) ..................................................... 13

DIP switch settings ............................................................................................................................ 14

Network address........................................................................................................................... 15

Operating modes .......................................................................................................................... 16

Power - on......................................................................................................................................... 17

Signalization ...................................................................................................................................... 17

Power-on ...................................................................................................................................... 17

Operation...................................................................................................................................... 18

Network Communication ............................................................................................................. 18

Actions and operating parameters ................................................................................................... 19

Setting Operational parameters –via Metra NET Network.............................................................. 20

Setting Operational parameters –by Display’s keypad.................................................................... 21

Setup mode activation.................................................................................................................. 21

Navigating thru menus with 4 key keypad ................................................................................... 21

Navigating thru menus with 12 key keypad ................................................................................. 21

Page 3

Locker Controller ELS & ELS SELECT Technical Manual

Initiating actions and setting operating parameters .................................................................... 22

Emergency Open procedure ............................................................................................................. 31

Internal Emergency open pushbutton.......................................................................................... 31

External Emergency open pushbutton ......................................................................................... 31

Test mode of operation .................................................................................................................... 32

Test mode activation .................................................................................................................... 32

Testing electronic locks installation.............................................................................................. 33

Closing Lockers for transportation ............................................................................................... 34

Testing Emergency open pushbutton........................................................................................... 35

Testing Coin acceptor ................................................................................................................... 36

Erasing operating parameters ...................................................................................................... 37

Warning signalization........................................................................................................................ 37

Alarm signalization............................................................................................................................ 37

Checking of locker Alarm functionality......................................................................................... 38

Expired/Blocked signalization ........................................................................................................... 38

Remote opening of single locker signalization................................................................................. 38

Functional Test.................................................................................................................................. 38

Checking locker wiring order (ELS Systems only) ......................................................................... 39

Locking / Unlocking of All Lockers ................................................................................................ 39

Device replacement .......................................................................................................................... 39

Maintenance ..................................................................................................................................... 40

Troubleshooting Guide ..................................................................................................................... 40

Technical data ................................................................................................................................... 40

Appendix ........................................................................................................................................... 41

Page 4

Locker Controller ELS & ELS SELECT Technical Manual

Manufacturer:

Metra inženiring d.o.o.

IOC Trzin

Špruha 19

SI-1236 Trzin, Slovenia

phone:

fax:

web:

+386 1 56 10 740

+386 1 56 10 744

www.metra.si

System:

Metra ELS & ELS SELECT–Electronic Locking Systems

Product Group:

Locker Controller

Types:

LC16AELKP, LC16AESKP, LC16ELKP, LC16ESKP, LC24ELKP, LC24ESKP, LC32ELKP, LC32ESKP (Keypad)

LC16AELIS, LC16AESIS, LC16ELIS, LC16ESIS, LC24ELIS, LC24ESIS, LC32ELIS, LC32ESIS (ISO 15693, ISO14443A/B)

LC16AELLF, LC16AESLF, LC16ELLF, LC16ESLF, LC24ELLF, LC24ESLF, LC32ELLF, LC32ESLF (LF Multitag)

LC16AELMF, LC16AESMF, LC16ELMF, LC16ESMF, LC24ELMF, LC24ESMF, LC32ELMF, LC32ESMF (Mifare)

LC16AELSD, LC16AESSD, LC16ELSD, LC16ESSD, LC24ELSD, LC24ESSD, LC32ELSD, LC32ESSD (Skidata)

LC08 (Locker Controller Extension Module)

Year of Construction:

2008-2011

Declaration of Conformity:

The Metra ELS & ELS SELECT products have been developed, designed

and manufactured in accordance with the EU directive for

Electromagnetic Compatibility (2004/108/EC).

Locker Controller ELS & ELS SELECT Technical Manual [rev.0-030811]

2011 Metra inženiring d.o.o.

No part of this manual may be reproduced in any form or by any means without prior written permission of Metra inženiring d.o.o.

The contents of this manual are subject to change without notice.

All efforts have been made to ensure the accuracy of the contents of this manual, however, should any errors be detected, Metra inženiring would greatly appreciate being informed of

them. Metra inženiring d.o.o. can assume no responsibility for any errors in this manual.

Product description

Metra Locker Controller is used in different Metra Electronic Locking Systems. Device drives and

monitors Metra Electronic Locks. Up to 16 locks can be connected directly to the unit, with the

possibility to add up to two Extension Modules for 8 additional Electronic Locks each. This enables

configurations for up to 16, 24 or 32 locks, which makes the controller adoptable to many locker

layout configurations. As user interface different system specific Metra user interface devices (e.g.

Display RFID/Keypad/Combo/Touch, Reader Terminal, Reader Terminal Basic, etc.) can be used.

Page 5

Locker Controller ELS & ELS SELECT Technical Manual

Locker Controller also supports emergency and security features. A pushbutton for emergency

opening of all Lockers connected to the Locker Controller (and belonging extension modules) is fitted

on the main electronics board and also an external emergency pushbutton can be connected. In case

of attempt of break-in an Alarm message is distributed over Metra NET Network to Metra user

interface devices and over Metra Network Controller to LAN / WAN and Metra software.

Different (system specific) enhancing accessories are available: Euro deposit pad to limit locker

misuse, coin acceptor to generate revenue from locker use, fingerprint module to lock / unlock

lockers simply by placing the finger as an addition to Keypad and/or RFID media reader on user

interface device.

For easier installation on site different configurations of controller & extension module(s) on

mounting plates are supplied.

Basic Parts

Locker Controller PCB with two extension modules and connecting PCB

Display

Display Combo

Display RFID

Display Keypad

Metra Display RFID is a user interface for Metra ELS systems, while

Metra Display Combo and Keypad are a user interfaces for Metra

ELS and Metra ELS SELECT systems.

Display Combo: Read RFID tickets as locker keys. Twelve key

washable keypad is integrated to enable additional user

interaction (PIN, locker number, etc.) and can be used for locking /

unlocking instead of RFID media.

Display RFID: Reads RFID tickets as locker keys.

Display Keypad: Integrated 12 key washable keypad to enable

user interaction (PIN, locker number, etc.).

Each model shows the locker number on a four digit LED display.

They also perform audio signalization and show an alarm message

if an attempt of break-in is detected on a Metra Electric Lock

connected to a Metra Locker Controller.

Locker Controller’s operating parameters are set up through

integrated 4 key system keypad (Display RFID) or through 12 key

keypad (Display Combo and Keypad) and stored in Locker

Controller’s internal battery powered memory. To simplify setup

of Locker Controller and manage master keys and master/setup

codes also Metra software can be used.

Page 6

Locker Controller ELS & ELS SELECT Technical Manual

Emergency Open Push-button (optional)

Emergency Open Push-button is used to initiate Emergency Open procedure

for all Electronic Locks connected to Locker Controller.

Coin acceptor (optional)

Locker Controller can be configured to ask for payment when locking the locker

door. In that case Coin Acceptor is mounted near the Display.

Fingerprint module (optional)

Fingerprint module allows users to lock/unlock the locker by presenting the

finger to sensor. It offers higher comfort for users as they don't need to

remember PIN code or carry around the RFID media. When fingerprint module

is connected to Locker Controller each user can freely choose whether he/she

will lock the locker using fingerprint/PIN code/RFID media.

Connections

Page 7

Locker Controller ELS & ELS SELECT Technical Manual

description

Electronic Lock 1

Electronic Lock 27

Electronic Lock 2

Electronic Lock 28

Electronic Lock 3

Electronic Lock 29

Electronic Lock 4

Electronic Lock 30

Electronic Lock 5

Electronic Lock 31

Electronic Lock 6

Electronic Lock 32

Electronic Lock 7

Local CAN*

Electronic Lock 8

Local CAN*

Electronic Lock 9

BDM Loader

Electronic Lock 10

Local CAN**

Electronic Lock 11

Local CAN**

Electronic Lock 12

BDM Loader

Electronic Lock 13

COM (Not used)

Electronic Lock 14

Local CAN***

Electronic Lock 15

Local CAN***

Electronic Lock 16

Metra NET Network

Electronic Lock 17

Power****

Electronic Lock 18

Power****

Electronic Lock 19

Emergency open pushbutton

Electronic Lock 20

Coin acceptor

Electronic Lock 21

Reader (Not used)

Electronic Lock 22

Fingerprint module

Electronic Lock 23

Display

Electronic Lock 24

I2C (Not used)

Electronic Lock 25

BDM Loader

Electronic Lock 26

I2C (Not used)

*NOTE: Local CAN connectors and are internally parallel connected.

**NOTE: Local CAN connectors and are internally parallel connected.

***NOTE: Local CAN connectors and are internally parallel connected.

****NOTE: 12V DC Power connectors and are internally parallel connected.

Connecting Locker Extension Modules

When Locker Controller without mounting plate is used connect up to two Extension modules by 6

wire flat cable. There are two equivalent connectors on the main electronics board (LC16A) use the

one which suits your connection best.

Page 8

Locker Controller ELS & ELS SELECT Technical Manual

When Locker Controller is ordered with mounting plate Extension Modules (LC24_* and LC32_*) are

already connected.

Locker Extension Module setting

The first Locker Extension Module DIP switch (indexes 17-24) and second Locker Extension Module

DIP switch (indexes 25-32) must be set as follows:

Connecting Electronic Locks

Connect Electronic Locks using 6 wire flat cables.

Maximum length of each cable is 20 meters.

Cables from Electronic Locks with lower locker numbers must be connected to lower index

connector. Locker number is increasing from left to right (blue arrows)!

Mind ascending order when numerating lockers. Gaps between numbers are allowed.

Page 9

Locker Controller ELS & ELS SELECT Technical Manual

EXAMPLE: Most left connector (index 1) is locker number 161, most right connector (index 32) is

locker number 192.

Display connection

Plug the 10 wire flat cable from the Display to the connector as shown in the schematic. See also

“Display – Technical Manual”.

Page 10

Locker Controller ELS & ELS SELECT Technical Manual

Power supply connection (Locker Controller without distribution board)

Regulated 12 VDC power supply is required for proper operation. Connect as many units as possible

to a single power supply unit. Consult the Technical Specifications section of this document for

current consumption.

There are two internally connected power connectors on the board. You can use one as “Power IN”

and the other as “Power OUT” connector.

Connect 12V DC regulated power supply to designated terminals. The terminals are marked as +12V

for positive connection and GND for ground connection.

WARNING

Mind the polarity! Wrong polarity could result in irreparable damage to the device.

Respect power requirements data! Using unsuitable power supply could result in damage to the

power supply and to the device.

Power supply connection (Locker Controller with distribution board)

Regulated 12 VDC power supply is required for proper operation. Connect as many units as possible

to a single power supply unit. Consult the Technical Specifications section of this document for

current consumption.

Connect 12V DC regulated power supply to designated terminals. The terminals are marked as +12V

for positive connection and GND for ground connection.

WARNING

Mind the polarity! Wrong polarity could result in irreparable damage to the device.

Respect power requirements data! Using unsuitable power supply could result in damage to the

power supply and to the device.

Andere Handbücher für ELS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Metra Electronics Controller Handbücher

Metra Electronics

Metra Electronics ELS NET LC16ANT Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch