Metronic DL2 Bedienungsanleitung

DL2

MULTICHANNEL ELECTRONIC

DATA LOGGER

OPERATING MANUAL

Version: 180530EN

This operating manual is also available on CD-ROM.

DL2

Information from the Manufacturer

Before installation, carefully read all the instructions, especially those

concerned with safety.

The recorder has been manufactured according to the requirements of relevant

EU directives.

These instructions must be stored in a safe place near the installation of the

device at all times.

All functions of the recorder are subject of modifications for the benefit of

technical progress.

DL2

TABLE OF CONTENTS

1SAFETY INFORMATION..........................................................................................7

2DL2 DELIVERY CONTENT, ACCESSORIES AND STORAGE.............................10

2.1 Basic components..........................................................................................10

2.2 Storage...........................................................................................................10

2.3 Accessories (optional)....................................................................................10

3GENERAL PRODUCT OVERVIEW........................................................................11

3.1 Purpose..........................................................................................................11

3.2 Basic functions...............................................................................................11

3.3 Available options............................................................................................12

3.4 Device configuration.......................................................................................12

3.5 Galvanic separation in the device ..................................................................13

4DL2 AVAILABLE I/O MODULES ...........................................................................14

4.1 DL2 base set..................................................................................................14

4.2 IN6I(24V) –six channel 0/4-20mA input type module....................................14

4.3 IN6I –six channel 0/4-20mA input type module.............................................14

4.4 IN6RTD (IN3RTD) –six (three) channel RTD / R input type module .............14

4.5 IN6TC - six channel mV type input module...................................................15

4.6 IN6V –six channel voltage type input module................................................15

4.7 IN3 –three channel universal type input module ...........................................15

4.8 IN6D –six channel binary inputs module.......................................................15

4.9 IN2RS485 (24V) –two RS485 port input module (Modbus RTU client).........16

4.10 IN2RS485 –two RS485 port input module (Modbus RTU client)...................16

4.11 OUT6RL –six channel relay outputs module.................................................16

4.12 OUT3 –three channel analogue outputs module...........................................16

5MECHANICAL INSTALLATION.............................................................................17

6ELECTRICAL INSTALLATION ..............................................................................19

6.1 Power supply connection (MODULE M).........................................................19

6.2 I/O modules –wiring diagrams (SLOT A and B) ............................................20

6.2.1 IN6I(24V) –six channel 0/4-20mA input type module..............................20

6.2.2 IN6I –six channel 0/4-20mA input type module ......................................21

6.2.3 IN6RTD –six channel RTD / R input type module...................................21

6.2.4 IN3RTD –three channel RTD / R input type module...............................22

6.2.5 IN6TC - six channel mV type input module.............................................23

6.2.6 IN6V –six channel voltage type input module.........................................23

6.2.7 IN3 –three channel universal type input module.....................................24

DL2

6.2.8 IN6D –six channel binary inputs module.................................................26

6.2.9 IN2RS485 (24V) –two RS485 port input module (Modbus RTU client) ..27

6.2.10 IN2RS485 –two RS485 port input module (Modbus RTU client)............28

6.2.11 OUT6RL –six channel relay outputs module ..........................................28

6.2.12 OUT3 –three channel analogue outputs module....................................29

6.3 Wiring diagrams for module M .......................................................................30

6.3.1 Wiring diagram for the analog output.......................................................30

6.3.2 Wiring diagram for the relay outputs........................................................30

6.3.3 Connection of RS-485 data transmission line..........................................31

6.3.4 Ethernet port............................................................................................31

7FRONT PANEL AND MAIN FUNCTION BUTTONS ..............................................32

7.1 Front panel.....................................................................................................32

7.1.1 Title bar....................................................................................................33

7.1.2 Menu bar .................................................................................................33

8FIRST START UP AND KEY ACTIVITIE................................................................34

8.1 Access control, login and change of user password ......................................34

8.1.1 Access control.........................................................................................34

8.1.2 Login........................................................................................................34

8.1.3 Changing the password...........................................................................35

8.2 Change of the language.................................................................................35

8.3 Recommended order for configuration of the device......................................35

8.4 Reading and saving files using the USB port.................................................37

8.5 Factory settings..............................................................................................38

9TECHNICAL SPECIFICATIONS.............................................................................39

10 ENTITY LAUNCHING THE PRODUCT ON EUROPEAN UNION MARKET..........46

11 USER SCREENS ...............................................................................................49

11.1 Information about the device..........................................................................49

11.2 Results Tables ...............................................................................................50

11.3 Trends............................................................................................................50

11.4 Single result window ......................................................................................51

11.5 Archive...........................................................................................................52

11.6 Main Menu .....................................................................................................53

11.7 Alarms............................................................................................................54

12 PROGRAMMING SETTINGS .............................................................................55

12.1 General settings.............................................................................................55

12.1.1 General....................................................................................................55

DL2

12.1.2 Display.....................................................................................................56

12.1.3 Date & Time.............................................................................................56

12.1.4 Service.....................................................................................................57

12.2 Input and output settings................................................................................57

12.2.1 Module M (MAIN) ....................................................................................57

12.2.2 Programming options for the individual modules.....................................58

12.3 Communication settings.................................................................................61

12.3.1 Ethernet port............................................................................................61

12.3.2 RS-485 port.............................................................................................61

12.4 Channels settings...........................................................................................62

12.4.1 Inputs.......................................................................................................62

12.4.2 General....................................................................................................63

12.4.3 Alarm.......................................................................................................64

12.4.4 Totalizers.................................................................................................65

12.5 Screen settings ..............................................................................................65

12.5.1 Results Tables.........................................................................................66

12.5.2 Trends .....................................................................................................66

12.6 Archive settings..............................................................................................67

13 ARCHIVE ...........................................................................................................68

13.1 Start, resume and stop archiving....................................................................68

13.2 Archive settings..............................................................................................68

13.3 Archive files types..........................................................................................68

13.4 Way of creating an archive file.......................................................................68

13.5 Time interval of archiving data .......................................................................68

13.6 Archive files organization ...............................................................................69

13.6.1 Data archive ............................................................................................69

13.6.2 Totalizer archive......................................................................................70

13.6.3 Event archive...........................................................................................70

13.7 Copying archive files from the device.............................................................71

13.7.1 Copying archive files to USB flash memory.............................................71

13.7.2 Copying archive files using device web server........................................71

14 ADDITIONAL FUNCTIONS ................................................................................72

14.1 Additional channel functions...........................................................................72

14.1.1 Math channels.........................................................................................72

14.1.2 User characteristics.................................................................................73

14.1.3 Copying channel settings ........................................................................74

DL2

14.2 Print screen....................................................................................................74

14.3 Web server.....................................................................................................75

14.4 Software for PC..............................................................................................76

14.4.1 DL2 Config...............................................................................................76

14.4.2 DL2-RP....................................................................................................77

15 FAILURE SYMBOLS .........................................................................................78

16 MODBUS RTU / MODBUS TCP TRANSMISSION PROTOCOL .......................79

16.1 General information........................................................................................79

16.1.1 Data types ...............................................................................................79

16.2 Registers addresses ......................................................................................79

16.2.1 Addresses table of Process values..........................................................79

16.2.2 Addresses table of Totalizer 1.................................................................80

16.2.3 Addresses table of Totalizer 2.................................................................80

Sections marked with symbol are available only in the CD-ROM version of this

manual attached to the device.

DL2

1 SAFETY INFORMATION

Safe operation of this product can only be guaranteed if it is properly installed,

commissioned, used and maintained by qualified personnel in compliance with the

operating instructions. General installation and safety instructions for pipeline and plant

construction, as well as the proper use of tools and safety equipment must also be

complied with.

Symbols

Equipment protected throughout by double insulation or reinforced

insulation.

Functional earth (ground) terminal, to enable the product to function

correctly. Not used to provide electrical safety.

Caution, risk of electric shock.

Caution, risk of danger, refer to accompanying documentation.

Caution, Electrostatic Discharge (ESD) sensitive circuit. Do not touch or

handle without proper electrostatic discharge precautions.

Important comments and information.

Warning

This product is designed and constructed to withstand the forces encountered during

normal use. Use of the product contrary to its intended purpose or incorrect installation of

the product, any product modifications or repairs incompatible with the following

instructions could:

cause damage to the product / property,

cause injury or fatality to personnel,

void your warranty,

invalidate the marking.

Isolate the mains supply before opening the product as hazardous

voltages may be exposed.

DL2

Warning

This product complies with the requirements of the following directives and harmonized

standards:

EMC Directive 2014/30/EC to the following standards and specifications:

For EMC immunity for industrial environments according to EN 61326-1:2013 Table 2.

For EMC conductive and radiated emissions according to EN 61326-1:2013

Class A equipment.

The product may be exposed to interference above the limits of EN 61326 if:

The product or its wiring is located near a radio transmitter.

Excessive electrical noise occurs on the mains supply. Power line protectors (AC)

should be installed if mains supply noise is likely. Protectors can combine filtering,

suppression, surge and spike arresters.

Cellular telephones and mobile radios may cause interference if used within

approximately 1 metre (39") of the product or its wiring. The actual separation distance

necessary will vary according to the surroundings of the installation and the power of

the transmitter.

Warning

This device is an Class A equipment. In a residential environment, it may cause radio

interference. In such cases, you can request from its users with appropriate measures.

Intended use

Check that the product is suitable for use with the application.

Determine the correct installation situation.

Prior to installation Metronic AKP products, should take into account any environmental

limitations of devices, specified in the manual.

Access

Ensure safe access and if necessary a safe working platform (suitably guarded) before

attempting to work on the product.

Lighting

Ensure adequate lighting, particularly where detailed or intricate work is required.

Hazardous environment around the product

Consider: explosion risk areas, lack of oxygen (e.g. tanks, pits), dangerous gases,

extremes of temperature, hot surfaces, fire hazard (e.g. during welding), excessive noise,

moving machinery.

The system

Consider the effect on the complete system of the work proposed: will any proposed

action put any other part of the system or any personnel at risk?

Dangers might include isolation of vents or protective devices or the rendering

ineffective of controls or alarms.

DL2

Tools and consumables

Before starting work ensure that you have suitable tools and / or consumables

available.

Protective clothing

Consider whether you and / or others in the vicinity require any protective clothing to

protect against the hazards of, for example, chemicals, high / low temperature, radiation,

noise, falling objects, and dangers to eyes and face.

Permits to work

All work must be carried out or be supervised by a suitably competent person.

Installation and operating personnel should be trained in the correct use of the product

according to the Installation and Maintenance Instructions. Where a formal 'permit to work'

system is in force it must be complied with. Where there is no such system, it is

recommended that a responsible person should know what work is going on and, where

necessary, arrange to have an assistant whose primary responsibility is safety.

Post 'warning notices' if necessary.

Cleaning and maintenance

Metronic AKP products require no maintenance beyond periodic battery replacement.

Expected battery life is 10 years after the expiry of which must be returned to the

manufacturer for a replacement.

From time to time you should clean the casing with a dry, soft cloth. When cleaning, do

not use solvents or abrasives. They may cause discoloration or scratch the surfaces of

device.

Disposal

The DL2 contains a battery. On disposal of the unit or component, appropriate

precautions should be taken in accordance with Local / National regulations.

Unless otherwise stated in the Installation and Maintenance Instructions, with the

exception of the battery, this product is recyclable and no ecological hazard is anticipated

with its disposal providing due care is taken.

Returning products

Customers are reminded that under EC Health, Safety and Environment Law, when

returning products to Metronic AKP they must provide information on any hazards and the

precautions to be taken due to contamination residues or mechanical damage which may

present a health, safety or environmental risk. This information must be provided in writing

including Health and Safety data sheets relating to any substances identified as hazardous

or potentially hazardous.

DL2

2 DL2 DELIVERY CONTENT, ACCESSORIES AND STORAGE

Prior to dispatch, each Metronic AKP device is inspected and calibrated to

ensure efficient operation.

CAUTION

Upon receipt, each package should be inspected for any potential damage.

The content of the package should also be checked and the actual number of

elements should be compared against the manufacturer's list of items presented in the

consecutive sub-section. In the case of damage or lack of elements, a report should be

drawn up in the presence of the carrier specifying the date of receipt and signature of the

person delivering the package.

2.1 Basic components

The DL2 Data Logger configured to individual customer's order 1 pc.

A set of plug-in type four-pole screw connection 1 set

Fixing clamp 2 pc.

Seal (assembled between case and panel) 1 pc.

A CD with the user instructions and configuration software 1 pc.

Quick start guide - printed 1 pc.

Warranty Card 1 pc.

Certificate of Calibration 1 pc.

2.2 Storage

If the device is to be stored if not used for a period of time and prior to the assembly,

the required storage conditions should be observed. The device should be kept in ambient

temperature range from -30 °C to 70 °C at the relative humidity at 5% to 95% (non-

condensing).

Prior the installation and connecting the device to the power supply make sure that

there is no condensation water inside the device.

2.3 Accessories (optional)

CONV485E

CONV485USB-I

CONV485USB

Power supply unit

USB flash drive

Inhaltsverzeichnis

Andere Metronic Datenlogger Handbücher

Metronic

Metronic DL7 Series Bedienungsanleitung

Metronic

Metronic DL7 Series Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung