Meyer Sound DS-2P Bedienungsanleitung

this unit is as simple as

plugging-in a power source

and an audio signal source.

The amplifier unit

is equipped with TruPower™

Limiter technology, which

maximizes speaker protection

reliability and component life.

This breakthrough in speaker

control also results in higher

SPL at all frequencies, and

increased available headroom.

Long term power compression,

typically 3-6 dB in conventional

systems, is less than 1 dB.

Maximum SPL capability

remains constant even during

operation at high levels for

extended periods.

DS-2P performance can be

supervised using the Remote

Monitoring System™(RMS).

This enables users at a

The DS-2P is a self-powered,

arrayable mid-bass loud-

speaker designed to

supplement the MSL-4 unit in

the 40-160 Hz range. It can

also be used with other, non-

powered units such as the

MSL-3A and MSL-10A. It

delivers high audio power with

extremely low distortion.

The DS-2P uses two 15-inch

cone drivers in a folded horn

enclosure. These horns have a

hyperbolic flare that give the

unit maximum energy transfer

with minimum frequency

response ripple.

The DS-2P has the

Intelligent ACTM system, which

performs automatic voltage

selection, EMI filtering, soft

current turn-on, and surge

suppression. Installation of

FEATURES

computer terminal to monitor

such parameters as limiting

activity, power output, voltage,

temperature, fan speed, and

driver status.

The built-in power amplifier

is designed for maximum

efficiency and reliability.

Servicing in the field is

facilitated by the modular

design of the DS-2P; the

entire power/amplifier module

can be accessed and replaced,

if necessary.

Self-Powered Mid-Bass Reinforcement Loudspeaker

DS-2P

Integrated control

electronics and amplifiers

TruPower ™

Limiting (TPL)

Intelligent AC™ System

Compatible with the

Remote Monitoring

System™(RMS)

High-power

Extremely low distortion

Reliable and durable

Arrayable

Meyer

Sound

Superior

engineering

for the art

and science

of sound.

Acoustical1

(each loudspeaker)

Coverage

Transducers

Audio Input

Amplifiers

AC Power

Physical

Notes

56.75

5.50

30.00

30.00 30.26

21.97

13.36

13.16

10.63

21.25 7.5°

PHYSICALDIMENSIONS

DS-2P SPECIFICATIONS

Frequency Response2

Phase Response2

Maximum SPL2

Dynamic Range

(-6 dB points)

Low Frequency

Type

Connector

Nominal Input Level

Type

Burst capability3

THD, IM, TIM

Connector

Automatic voltage selection

Operational Voltage range

Max Continuous RMS Current (>10 sec)

Burst RMS Current (<1 sec)

Max Peak Current During Burst

Soft Current Turn-on

Dimensions

Weight

Enclosure

Finish

Protective Grill

Rigging

±4 dB from 40 Hz to 160 Hz

±60° from 60 Hz to 200 Hz

>140 dB SPL peak@1 meter

>120 dB

120°H; 120°V

15” diameter MS-15 cone (2)

10kΩ impedance, electronically balanced

XLR (A-3) male and female

+4 dBu

Complementary power MOSFET output stages (audio class AB/H)

1240 watts (620 watts/channel)

<.02 %

250V NEMA L6-20P (twistlock) inlet or IEC 309 male inlet4

95-125 VAC and 208-235 VAC; 50/60 Hz5

Turn on: 85 VAC; Turn off: 134 VAC; 50/60 Hz

Turn on: 165 VAC; Turn off: 264 VAC; 50/60 Hz

@115V: 8A @230V: 4A @100V: 10A

@115V: 15A @230V: 8A @100V: 18A

@115V: 22Apk @230V: 11Apk @100V: 25Apk

Inrush current <12A @ 115V

21 1⁄4” W x 56 3⁄4” H x 30” D

243 lbs (110 kg) / shipping: 267 lbs (121 kg)

Multi-ply hardwood

Black textured

Perforated metal grill, charcoal-grey foam

Aircraft pan fittings (3 on both top and bottom).

Working load for each fitting is 600 lbs, which is 1⁄5the

cabinet breaking strength (with straight tensile pull).

1. Acoustical specifications are for the minimum configuration of two DS-2P cabinets and are

measured on axis at 2 meters from 1/R image (located at cabinet rear).

2. Subject to half space loading, measured with one-third octave frequency resolution in

fixed ISO bands.

3. Nominal 8Ω resistive load, pink noise, 100V peak.

4. Other connectors available.

5. The unit is rated at 95-125 VAC and 208-235 VAC, 50/60 Hz, to satisfy EC standards for

–10% to 6% AC line voltage.

ALL UNITS IN INCHES

Meyer Sound Laboratories, Inc.

2832 San Pablo Avenue

Berkeley, CA 94702

tel: 510.486.1166

fax: 510.486.8356

e-mail: [email protected]

http: www.meyersound.com

UULL

®®

LISTED

3K59

COMMERCIAL

AUDIO SYSTEM

Meyer Sound Laboratories

has devoted itself to

designing, manufacturing,

and refining components

that deliver superb sonic

reproduction. Every part of

every component is

designed and built to

exacting specifications

and undergoes rigorous,

comprehensive testing

in the laboratories.

Research remains an

integral, driving force

behind all production.

Meyer strives for sound

quality that is predictable

and neutral over an

extended lifetime and

across an extended range.

Made by Meyer Sound, Berkeley, CA, USA

European Office:

Meyer Sound Germany

GmbH

Carl Zeiss Strasse 13

56751 Polch, Germany

DS-2P - 04.035.013.01B

Rear Panel Locations (U.S. Version)

Andere Handbücher für DS-2P

Andere Meyer Sound Sprecher Handbücher

Meyer Sound

Meyer Sound DS-2P Bedienungsanleitung

Meyer Sound

Meyer Sound M2D Bedienungsanleitung

Meyer Sound

Meyer Sound UPQ-1P Bedienungsanleitung

Meyer Sound

Meyer Sound LEOPARD Series Bedienungsanleitung

Meyer Sound

Meyer Sound HMS-10 Bedienungsanleitung

Meyer Sound

Meyer Sound HMS-5 Bedienungsanleitung

Meyer Sound

Meyer Sound 1100-LFC Bedienungsanleitung

Meyer Sound

Meyer Sound Mina Bedienungsanleitung

Meyer Sound

Meyer Sound M SERIES Bedienungsanleitung

Meyer Sound

Meyer Sound 1100-LFC Bedienungsanleitung

Meyer Sound

Meyer Sound 750-LFC Bedienungsanleitung

Meyer Sound

Meyer Sound Stella - 4 Constellation Bedienungsanleitung

Meyer Sound

Meyer Sound MILO 120 Bedienungsanleitung

Meyer Sound

Meyer Sound MJF-212A Bedienungsanleitung

Meyer Sound

Meyer Sound UPA-1P Bedienungsanleitung

Meyer Sound

Meyer Sound UPA-2C Bedienungsanleitung

Meyer Sound

Meyer Sound DS-2 Bedienungsanleitung

Meyer Sound

Meyer Sound MILO Bedienungsanleitung

Meyer Sound

Meyer Sound MICA Bedienungsanleitung

Meyer Sound

Meyer Sound CQ-1 Bedienungsanleitung

Meyer Sound

Meyer Sound Reinforcement Loudspeaker UPM-2 Bedienungsanleitung

Meyer Sound

Meyer Sound MILO 60 Bedienungsanleitung

Meyer Sound

Meyer Sound UPA-1P Bedienungsanleitung

Meyer Sound

Meyer Sound HIGH DEFINITION AUDIO MONITOR HD-1 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung