MGI ZIP X1 Bedienungsanleitung

User Manual

VERSION 1.6

Thank you for purchasing the Game

Changing MGI ZIP X1 motorized caddy.

To get the most out of your caddy please

follow these quick steps before use.

• Register your caddy online [section 1.0]

• Assembling the caddy [section 3.0]

• Charge the battery [section 4.0]

For Customer Support, please contact MGI directly

for immediate and professional advice.

Email: [email protected]

LIVE chat: visit www.mgigolf.com

USA: 760 966 1566

Local Service Centers: visit www.mgigolf.com to locate

your local service center.

NOTE: This user manual was correct at time of printing. The online

version is the most up-to-date and must be referred to as the

correct version. To download the most current user manual

please visit www.mgigolf.com. Images shown throughout this

manual may not be of the particular model you have purchased,

however the instruction they refer to is for the model in the

user manual.

1.0 Registration

Contents

MGI ZIP X1 User Manual 03

1.0 Registration 04

2.0 What Is Included 04

3.0 Assembling the Caddy 05

3.1 Attaching the Rear Wheels 05

3.2 Rear Wheel Positions 06

3.3 Unfolding 07

3.4 Folding 08

3.5 Foldable Fourth Wheel 09

3.6 GPS Holder and Top Handle

Compartment 09

3.7 Inverting Rear Wheels 09

4.0 Battery Charging & Connection 10

4.1 Initial Charge 10

4.2 Connecting the Battery onto the

Caddy 10

4.3 Charging the Battery after Use 11

5.0 Fitting the Golf Bag 11

6.0 Operating the Digital Top Box 12

6.1 Top Box Display 12

6.2 Start / Stop the Caddy 12

6.3 Turn the Caddy Off 13

7.0 Front Wheel Alignment 13

8.0 Warranty 14

8.1 Warranty Policy 14

8.2 Warranty Exclusions 15

8.3 Parts Installed During Warranty 15

9.0 Preventative Maintenance Program 15

9.1 Cleaning Your MGI ZIP Caddy 16

9.2 Rear Wheel Axles Maintenance 16

9.3 Upper and Lower Bag Strap 16

9.4 MGI Service Schedule 16

9.5 Service Record for All Caddies 18

10.0 Service and Repair Centres 19

11.0 Purchasing Parts and Accessories 19

12.0 Contacting MGI 19

13.0 Contacting Local Agent 19

14.0 Frequently Asked Questions 19

It is most important you register your MGI Caddy online

immediately as registration:

• Records your caddy for warranty purposes

• Speeds up any servicing required on your caddy

• Assist us to contact you with any updates to your caddy

To register your caddy, visit www.mgigolf.com

You will need to record your MGI serial number. This is found on

the caddy battery base or in the top box compartment.

Please keep this user manual on ﬁle for your own reference

and a copy of your serial number;

My MGI Caddy Serial Number is

[example AZX1V1173401234]

Purchased Date

/ /

You may be required to show proof of purchase so we

recommend you keep your receipt with this manual.

2.0 What’s Included

• MGI ZIP Caddy

• 24v Lithium Battery

• Battery Charger

• GPS Holder

• MGI Pouch with:

– User Manual

– Accessory Guide

3.0 Assembling Your Caddy

3.1 Attaching the Rear Wheels

Step 1. Each wheel is labelled with L or R for left or right. This is very

important as the wheels must be placed on the correct side of the

caddy. Left or right sides are determined when standing behind

the caddy as pictured above.

Step 2. On the wheel, press the grey release button on the wheel

hub. Place the wheel onto the axle. You will notice you need to

match up the inner female groove on the axle and the male

of the wheel. When placed in position simply release the button.

You will notice you hear a “click” when the wheel is properly

secured. To check that the wheel is properly in position pull

on the wheel. If it is properly in position it will not slide off.

Repeat for the other wheel.

3.2 Rear Wheels Positions

The MGI ZIP caddy is designed to allow the rear wheels to be in

MGI ZIP X1 User Manual 0504

Lefthand

side

Righthand

side

two positions. The position is determined by where the wheel is

locked on the axle in either of the two grooves [see picture]. The

drive position is used during the normal operation of the caddy.

The free wheel position is used to freely push the caddy should

you experience battery or caddy issues on the course.

i. Drive position – Lock the wheel onto the groove closest to the

battery base. To do this, press the grey release button on the

wheel hub, push the wheel on to the axle as far as possible. To

test for drive position try rolling the wheel backwards. If you feel

resistance then the wheel is now in drive position and ready to

use. Repeat for both wheels.

ii. Free wheel – Lock the wheel into the groove closest to the

end of the axle. To do this, press the grey release button on

the wheel hub, push the wheel on to the axle and release the

release button onto the groove. To test for free wheel position try

rolling the wheel backwards. The wheel should spin freely with no

resistance. Repeat for both wheels.

3.3 Unfolding

Please see below

the steps to unfold

a ZIP Caddy Handle.

Step 7: Push the Top Bag support down to move it into position.

MGI ZIP X1 User Manual 0706

Free wheel position

Drive position Step 1: Ensure both rear

wheels are attached.

Step 2: Release Fold Lever.

Step 4: The handle is now free to pull

upwards. The handle will naturally

unfold as you continue to pull until the

handle is completely open.

Step 6: Close the fold lever to lock

the handle into place in one

of three positions.

Step 5: Ensure that

the latch at the bottom

of the handle clicks into

place.

Step 3: Move Top Bag

Support away from front

wheel assembly until you

hear it click.

3.5 Fourth Foldable Rear Wheel

The MGI ZIP X1 comes standard with a fourth foldable rear wheel.

This wheel MUST be unfolded into position at all times when

the caddy is in use. This will reduce damaging the caddy, and

provide the ultimate in stability across all terrains. This fourth wheel

should be cleaned regularly with a cloth to ensure it can be

folded as required for storage.

3.6 GPS Holder and Top Handle Compartment

In the top handle compartment there is a position for a GPS/

mobile device holder. Open the compartment and connect the

holder into position. To open the holder always press the button

at the top of the holder. Place the GPS into the cradle, then close

the holder by squeezing the two sides closer together.

3.7 Inverting Rear wheels

The rear wheels can be inverted on the axle to reduce the size of

the caddy when folded.

MGI ZIP X1 User Manual 0908

3.4 Folding

Step 1: Disconnect the battery. It

can left on or removed from the

caddy.

Step 2: Open the fold lever

to release the handle.

Step 3: Pull up the latch at the

bottom of the handle.

Step 4: Lower the handle down ﬂat.

Step 6: Close the fold lever to lock

the handle into place.

Step 5: Push the

toggle down on the

top bag support and

then move the Top

Bag Support down so

that it locks over the

front wheel assembly.

Toggle

MGI ZIP X1 User Manual 1110

4.0 Battery Charging & Connection

The ZIP X1 is designed to take either ZIP battery:

• MGI 24v 250Wh Lithium battery [Standard]

• MGI 24v 380Wh Lithium battery [Optional]

4.1 Initial Charge

• Before using your MGI ZIP caddy for the ﬁrst time you must

fully charge the battery overnight.

• Plug the charger AC lead into a power point - the Green LED

illuminates to indicate the charger is power on.

• Plug the charger output connection into the connector on

the front of the battery - the Red LED illuminates to indicate

charging.

• When the charging LED indicator has turned green, the

battery is fully charged and ready to be used.

Please refer to the battery charger user manual for further

information.

4.2 Connecting the Battery onto the Caddy

Position the battery on the caddy and push the battery down to

secure it.

Push the handle down to connect the battery to the caddy.

Your caddy has been equipped with fail safe battery connection,

so the caddy will not move when you connect the battery. Your

caddy will only start once the speed control is switched on.

4.3 Charging the Battery after Use

• Disconnect the battery by lifting the handle.

• The battery can be left on or removed from the caddy for

charging.

• Plug the charger AC lead into a power point - the Green LED

illuminates to indicate the charger is power on.

• Plug the charger output connection into the connector on

the front of the battery - the Red LED illuminates to indicate

charging.

• When the charging LED indicator has turned green, the

battery is fully charged and ready to be used.

5.0 Fitting the Golf Bag

Ensure that the top bag support straps are disconnected.

Position the golf bag on the caddy.

Secure the top bag support strap

• Select a good position for the elasticized straps to be put

around the golf bag

• Stretch the longer end of the strap and loop the rounded

plastic bar underneath the hook on the shorter end

• The top bag support straps should now be connected.

Please ensure the top bag support straps are hooked in place

securely before releasing. Failure to do so could result in injury to

the user.

Adjusting the length of the top bag support strap

The rounded plastic bar on the longer strap can be adjusted to

ensure the bag is secured properly in place.

Secure the lower bag strap

Pull the lower bag strap over the base of the golf bag

MGI ZIP X1 User Manual 1312

6.0 Operating the Digital Top Box

6.1 Top Box Display

Light 1: Caddy active

A green light will appear on the left hand side when the caddy is

active and moving.

Light 2: Battery indication

The light on the right hand side displays the battery status. There

are three colors of battery status: Green [charged], Amber [low]

and Red [very low].

Number Display: This shows the speed setting 1 to 9. The higher

the number the higher the speed.

6.2 Start / Stop the Caddy

ZIP Caddy Speed Control

Please note the following points regarding the ZIP Caddy Speed

Control.

1. To select the desired speed, rotate the speed control button.

Turning the speed control button clockwise will increase the

speed, whilst anti-clockwise will decrease speed.

2. The speed setting chosen is displayed in the center of the

colored screen.

Please note you will feel notches as you rotate the speed control. The notches

do not indicate a change in speed. The speed will only increase or decrease as

the number changes in the display.

3. To start the caddy at this desired speed, tap the top

of the speed control button.

4. Another tap will stop the caddy.

5. The desired speed can be altered up or down while

the caddy is moving.

6.3 Turn the Caddy Off

ZIP Caddy Battery

Please note the following points regarding the Zip Caddy Battery.

Connecting the Battery onto the Caddy

1. Position the battery on the caddy and push the battery

down to secure it. Push the battery handle down to connect

the battery to the caddy.

2. To turn the caddy Top Box Display off:

Hold down the Start/Stop Speed Control Button for four

seconds and the display will turn off thereby disabling the

Top Box.

Please note that the battery will still be connected to the caddy

and will continue to drain whilst connected.

Please note that the caddy display will also turn off if the

Speed Control is not operated for 30 minutes.

Once again, please note that the battery will still be connected

to the caddy and will continue to drain whilst connected.

To reactivate the Top Box Display, whilst the battery is connected,

hold down the Start/Stop Speed Control Button for four seconds

and the display will turn on thereby enabling the Top Box.

To fully shut down the caddy and prevent the battery from

discharging, disconnect the battery by lifting its handle. The

battery can be left on or removed from the caddy.

7.0 Front Wheel Alignment

During the life of your caddy, it may require a realignment to

ensure it tracks straight on ﬂat surfaces. Follow these instructions

to correct the front wheel alignment of the caddy.

Step 1: Release and turn the lever to loosen the front wheel.

Light 2Light 1

Speed

Speed Control

MGI ZIP X1 User Manual 1514

Step 2: There are two silver thumb screws located on either side

of the front wheel. Adjusting these screws will help straighten the

alignment by correcting the caddy to track more to the left or

the right.

Roll the left or right hand side silver thumb screw UP to straighten

the caddy more to the LEFT.

Roll the left or right hand side silver thumb screw DOWN to

straighten the caddy more to the RIGHT.

You can roll the screws simultaneously or individual to achieve the

desired alignment.

Step 3: Once alignment is set, turn the lever and tighten. Then

close the lever.

TIP: When adjusting the front wheel and testing the alignment,

ensure the caddy is run on a ﬂat, smooth surface like a carpark.

8.0 Warranty

8.1 Warranty Policy

3. The MGI ZIP caddy is covered by a Limited* manufacturer’s

warranty from the date of purchase. Duration of this warranty

is:

– 2 years on parts*

– 2 years on Lithium batteries and chargers

*MGI or an authorized service center will repair or replace any

parts found to be defective in materials or workmanship under

normal use provided that:

1. The MGI ZIP caddy has been properly used, maintained and

regularly serviced [see section 9.4]

2. The replacement or repair is performed by an authorized

MGI service center or the owner with MGI approval.

3. The caddy has been registered online.

8.2 Warranty Exclusions

The following events will void warranty:

• Any alteration performed by non-authorized people

or companies.

• Fitting of parts or accessories not recommended by MGI.

• Any damage caused by continued operation of the

motorized caddy after it is known to be defective.

• Damage to seat and/or seat support bracket on caddy

• Damage caused by ingress of water into motor/gearbox

and other major components

• Damage caused by caddy going into bunkers and other

course hazards

• All implied warranties [save those preserved by statute] are

excluded. Liability for consequential damages under any

and all warranties are excluded to the extent exclusion is

permitted by law.

8.3 Parts Installed During Warranty

Warranty coverage for components installed during a motorized

caddy’s warranty period shall consist of the duration of the

caddy’s warranty period, provided the warranty installation is

performed by MGI, an authorized service center or the caddy

owner on approval. Replacement of parts under warranty will not

extend the warranty of the caddy or parts.

Thumb Screw

Tighten

MGI ZIP X1 User Manual 1716

9.0 Preventative Maintenance Program

To properly provide for the continued operation of your MGI

ZIP caddy, MGI has introduced its Preventative Maintenance

Program [PMP]. The PMP consists of work to be carried out by

both the owner and authorized service centres. To properly

maintain the warranty of your MGI motorized caddy, it is essential

that this work is carried out. If the work carried out by the

authorized service center is to replace parts that are part of the

maintenance schedule, the owner will be charged for the parts

and labor. If the work to be carried out is part of warranty, MGI will

bear the cost.

9.1 Cleaning Your MGI ZIP Caddy [See Maintenance Schedule]

• For years of good operation, your caddy requires care and

attention.

• Keep your caddy clean by using a cloth with warm water

and a mild detergent.

• Do not hose down your caddy under any circumstance, as

the caddy has electronic components.

• Ensure that the seat stem bracket is free from sand.

• Do not submerge your caddy in water as it will cause

irreparable damage.

• Clean the caddy battery base when the battery is removed

from the caddy.

9.2 Rear Wheel Axles Maintenance [See Maintenance Schedule]

The rear wheel stub axles need to be lubricated regularly. Remove

the rear wheels by depressing the spring clip and at the same

time pull off the wheel. Apply Petroleum Jelly or light grease to

the stub axles. Use a very small amount as the grease can attract

sand. If you play in sandy conditions you should clean the axle

and regrease fortnightly.

9.3 Upper and Lower Bag Strap Maintenance [See Maintenance

Schedule]

The bag straps should be replaced as per the Service Schedule.

The upper bag strap can be replaced by:

• Removing the left and right hand straps form the upper bag

support

• Undo and remove the screws holding the strap in position on

the bag support

• Remove and replace both bag straps

• Insert bag strap securing screws.

9.4 MGI Service Schedule

It is the owner’s responsibility to ensure that all periodical checks,

necessary adjustments and services are carried out. If in doubt

please contact the MGI service center on 1300 644 523. Any work

performed on your caddy should be recorded on your service

record (see page 18) regardless of the work.

MGI ZIP X1 Monthly 6

Monthly

Every

2 yrs

Every

3 yrs

Wipe down the

caddy with a warm

cloth after each use

[do not hose]

Lubricate rear wheel

stub axles BO

Check and tighten

nuts and bolts BO

Check and tighten

handle pivots BO

Check alignment of

caddy – ensure that

it runs straight

Replace Speed

Controller and On/

Off switch assembly

BO /SC

Replace rear and

front wheels BO

Replace upper and

lower bag straps BO

BO = Caddy owner can carry out this work

SC = Charged work to be carried by approved service center

BO/SC = The six monthly service can be completed by either an

authorized service center or the owner of the caddy.

MGI ZIP X1 User Manual 1918

9.5 Service Record for All Caddies

6 month inspection Date:

Invoice #:

Serviced by:

Signature:

1 year inspection Date:

Invoice #:

Serviced by:

Signature:

1 ½ year inspection Date:

Invoice #:

Serviced by:

Signature:

2 year inspection Date:

Invoice #:

Serviced by:

Signature:

2 ½ year inspection Date:

Invoice #:

Serviced by:

Signature:

3 year inspection Date:

Invoice #:

Serviced by:

Signature:

3 ½ year inspection Date:

Invoice #:

Serviced by:

Signature:

4 year inspection Date:

Invoice #:

Serviced by:

Signature:

4 ½ year inspection Date:

Invoice #:

Serviced by:

Signature:

5 year inspection Date:

Invoice #:

Serviced by:

Signature:

5 ½ year inspection Date:

Invoice #:

Serviced by:

Signature:

6 year inspection Date:

Invoice #:

Serviced by:

Signature:

10.0 Service and Repair Centres

For all servicing, please do not go back to your place

of purchase.

MGI offers the largest network of Service Centres in Australia

and New Zealand. To ﬁnd your nearest Service center visit

www.mgigolf.com

For warranty repairs to be authorized you MUST provide proof of

purchase. Please keep this with you as well as your Serial number

you can record in this manual. It is most important you register

your MGI Caddy online for warranty purposes.

11.0 Purchasing Parts and Accessories

You are welcome to service your caddy out of warranty,

by purchasing parts direct from MGI. Please call or email

to discuss the right parts and instructions.

12.0 Contacting MGI

MGI Service Center

Address:

629 South Cleveland Street, Oceanside California 93054

SALES Telephone: 855 434 5111

SERVICE CENTER Telephone: 760 966 1566

Email: [email protected] Web: www.mgigolf.com

13.0 Contacting Local Agent

Please refer to www.mgigolf.com to ﬁnd the distributor in your

country.

14.0 FAQ

Q: I would like to have my MGI caddy serviced.

Who do I call?

A: Visit www.mgigolf.com to ﬁnd your nearest Service Center

using your postcode within Australian and New Zealand.

You can also call MGI Head ofﬁce using any of the contact

details. See Section 12.0 for details. Internationals please call

your local agent as per Section 13.0.

Inhaltsverzeichnis

Andere MGI Golfwagen Handbücher

MGI

MGI ZIP X3 Bedienungsanleitung

Beliebte Golfwagen Handbücher anderer Marken

Yamaha

Yamaha YDRA Betriebsanleitung

Club Car

Club Car Tourall 1989 Bedienungsanleitung

ACG

ACG 39Roadster eGC 2013 Bedienungsanleitung

GEM

GEM E580 Bedienungsanleitung

Yukon Trail

Yukon Trail solar wing 350 Bedienungsanleitung

Sunrise Medical

Sunrise Medical TROPHY 20 Bedienungsanleitung

Club Car

Club Car Carryall 300 2021 Handbuch

Club Car

Club Car 1995 Golf Car Handbuch

Textron

Textron EZGO RXV 2016 Bedienungsanleitung

Cushman

Cushman 623526-H Bedienungsanleitung

Atomic

Atomic COUPE & TRUCK Bedienungsanleitung

GARIA

GARIA Golf Car Bedienungsanleitung

Giggo

Giggo GT00100 Bedienungsanleitung

Peg-Perego

Peg-Perego FIAT 500 Bedienungsanleitung

Columbia ParCar

Columbia ParCar Summit Bedienungsanleitung

CRICKET MINI GOLF CARTS

CRICKET MINI GOLF CARTS RX5 Bedienungsanleitung

Alba

Alba Crew Bedienungsanleitung

Dynacraft

Dynacraft 6V QUAD Bedienungsanleitung