Mi LYWSD03MMC Bedienungsanleitung
Mi Temperature and Humidity Monitor 2
User Manual
01
Rear
Adhesive Area
Cover Opening
Rear Ventilation Holes
Note:
Do not obstruct the
ventilation holes when
installing or using the
monitor.
Read this manual carefully before use, and retain it for
future reference.
Product Overview
Front
Display
Top Ventilation Holes
Note:
Do not obstruct the ventilation
holes when installing or using
the monitor.
Lanyard Hole
Note:
To use the lanyard hole,
remove the back cover of the
monitor first.
Accessory
Adhesive Sticker
Remove the cover from the
cover opening of the monitor,
and place a CR2032 baery
with the positive (+) side
facing upwards, then reinstall
the cover.
a. Placing: Directly place the monitor on the surface
of the furniture such as table, bookshelf.
b. Using the adhesive
sticker: Remove the
release liner from one
side of the adhesive
sticker to stick it on the
back of the monitor,
then remove the
release liner from the
other side to stick it at
the desired place on
the wall.
You can use and install your monitor in the following
ways:
Installation
Installing the Baery
Note: Baery is not included
and sold separately.
02
c. Hanging: Remove the back cover of the monitor,
and lead the lanyard's loop through the hole and
around the hook. Reinstall the back cover, then
hang the monitor.
Note: Lanyard is not included and sold separately.
Temperature
Comfort Level Symbol
Data Transfer Symbol
Temperature Unit
Humidity
Low Baery Symbol
Display Description
03
04
Symbol Instructions
Between 19°C
and 27°C
Between 20%
and 85%
Less than 20%
More than 85%
More than 27°C
Less than 19°C
This product works with Mi Home/Xiaomi Home app *.
Control your device, and interact it and other smart
home devices with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the app
is installed already. Or search "Mi Home/Xiaomi Home"
in the app store to download and install it.
Connect with Mi Home/Xiaomi Home App
Smart Connection
Low Baery Notification
When the baery is at a low level,
this symbol appears on the
display. Please replace the
baery. Low Baery Symbol
Temperature
Humidity
05
Open Mi Home/Xiaomi Home app, tap "+" on the upper
right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on
your device should be taken as the default.
Connect with Other Devices
The version of the app might have been
updated, please follow the instructions based
on the current app version.
Note:
Make sure your temperature and humidity monitor is
connected with Mi Home/Xiaomi Home app. Tap " "
on the upper right corner of the monitor's user
interface, then follow the on-screen instructions to
connect with other smart devices.
Mi Temperature and Hu
30.1℃ 33.2℃ 33.5℃
31.6℃ 29.2℃
Temperature（℃） Humidity（%）
33.4
48
Temperature
℃
%
Humidity
The monitor can only connect with these
devices supporting the function of Mi Bluetooth
Gateway. Please contact the customer service
for detailed information.
Note:
Remove the back cover when the monitor is working
normally, and use a conductive material to connect the
two contact points above the baery for about 5–8
seconds. Once the monitor restarts, the factory
seings have been restored and previously saved data
has been cleared.
Restoring Factory Seings
06
Do not immerse the ventilation holes into any liquid.
Do not remove the monitor from a wall with force if
it is aached with the adhesive sticker, so as to
avoid damage to the wall or the monitor.
This monitor is not suitable for use in environments
with temperatures below 0°C. Please keep it away
from harsh environments with high temperatures or
high humidity.
This monitor is designed to facilitate a healthy
lifestyle, but should not be used as a measuring tool.
Precautions
Daily Care & Maintenance
Please prevent water from geing into the monitor
when cleaning it.
When the surface of the monitor is dirty, it can be
wiped clean using a damp so cloth with some
neutral detergent.
07
08
Specifications
Name: Mi Temperature and Humidity Monitor 2
Model: LYWSD03MMC
Materials: ABS & PMMA
Dimensions: 43 × 43 × 12.5 mm
Net Weight: 18 g
Operating Voltage: DC 2.5–3 V
Baery Type: CR2032 (Not included)
WirelessConnectivity: Bluetooth4.2BluetoothLowEnergy
Frequency Range: 2402MHz-2480MHz
Temperature Measurement Range: 0°C to 60°C
Temperature Accuracy: ± 0.1°C
Humidity Measurement Range: 0–99% RH
Humidity Accuracy: ± 1% RH
Note: Illustrations of product, accessories, and user
interface in the user manual are for reference purposes
only. Actual product and functions may vary due to
product enhancements.
Hereby, MiaoMiaoCe Technology (Beijing)
Co., Ltd. declares that the radio equipment
type LYWSD03MMC is in compliance with
Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet
address: hp://www.mi.com/global/service/support/-
declaration.html
09
Version: V1.0
All products bearing this symbol are waste
electrical and electronic equipment (WEEE as
in directive 2012/19/EU) which should not be
mixed with unsorted household waste.
Instead, you should protect human health and the
environment by handing over your waste equipment to
a designated collection point for the recycling of waste
electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and
recycling will help prevent potential negative
consequences to the environment and human health.
Please contact the installer or local authorities for more
information about the location as well as terms and
conditions of such collection points.
Please take aention that changes or modification not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
10
As a Xiaomi consumer, you benefit under certain
conditions from additional warranties. Xiaomi offers
specific consumer warranty benefits which are in
addition to, and not instead of, any legal warranties
provided by your national consumer law. The duration
and conditions related to the legal warranties are
provided by respective local laws. For more information
about the consumer warranty benefits, please refer to
Xiaomi's official website hps://www.mi.com/en/ser-
vice/warranty/. Except as prohibited by laws or
otherwise promised by Xiaomi, the aer-sales services
shall be limited to the country or region of the original
purchase. Under the consumer warranty, to the fullest
extent permied by law, Xiaomi will, at its discretion,
repair, replace or refund your product. Normal wear and
tear, force majeure, abuse or damage caused by the
user's negligence or fault are not warranted. The
contact person for the aer-sale service may be any
person in Xiaomi's authorized service network, Xiaomi's
authorized distributors or the final vendor who sold the
products to you. If in doubt please contact the relevant
person as Xiaomi may identify.
The present warranties do not apply in Hong Kong and
Taiwan.
Products which were not duly imported and/or were
11
not duly manufactured by Xiaomi and/or were not duly
acquired from Xiaomi or a Xiaomi’s official seller are not
covered by the present warranties. As per applicable
law you may benefit from warranties from the
non-official retailer who sold the product. Therefore,
Xiaomi invites you to contact the retailer from whom
you purchased the product.
WARRANTY NOTICE
Andere Handbücher für LYWSD03MMC
1
Inhaltsverzeichnis
Andere Mi Monitor Handbücher
