Micron MC-20 Bedienungsanleitung
Fastening Attaching
Machine
User Manual
VERSION 1.02
MC-20
Introduction
Setup Process Procedures
Assembling the Table and Mounting the MC-20 7
Remove all the contents of the box and layout and floor 7
Assembling the Lengs 8
Securing the Table Top to the Legs 9
Unboxing the MC-20 10
Securing the MC-20 to the Table 11 - 12
MC-20 Pneumatic, Electrical and Foot Pedal Connections
Installing Dies and Adapters with Dies
MC-20
User Manual / Table of Contents
2/37
Connecting to the Air Compressor 13
Connecting to an Outlet 14
Connecting the Foot Pedal 15
Technical Data (Single) 4
Technical Data (Double) 5
Scope and Purpose 6
Setup Process Overview 6
Installing Dies with Adapters 16 - 19
Installing Dies without Adapters 20
Securing Industrial Dies 21
Turning the Machine On and Emergency Stop Button
Air Pressure Setting
Air Pressure Power and Setting 24 -25
General Meintenance
Instruction
MC-20
User Manual / Table of Contents
3/37
Filter Cleaning Process 27 - 28
Oil Filling Process 29
Resetting Safety System 30 - 31
Air Leak Problems 31
Start Button & Mill Problem 32 -33
Turning the Machine On and Emergency Stop Button 22 - 23
Instruction of the Screen Operation 34
Schematic Diagram 35
Safety Pistons Connection Diagram 36
Fuse System
Fuse System 26
Contact Informations
Contact Informations 37
Caution 37
MC-20
User Manual / Introduction
4/37
Technical Data (Single)
Special Futures
Suitable for applications on various materials,
including heavy fabrics and sensitive substrates.
Easily interchangeable tooling to apply various sizes of
grommets with a single machine.
Pneumatic Safety System. CE compatibillity.
No need for electricity. Works with air compressor.
Ability to apply even the large size of grommets. # 12
(40mm) curtain grommets.
Capable of applying up to 450 kg of pressure per
square centimeter.
A laser guidance system that marks the grommet
setting point.
All types and sizes of Eyelets, Spring Snaps, Ring
Snaps, Jean Rivets and Jean Buttons.
The digital panel of the MC-20 displays installed
fastener count, and piston stroke settings.
Laser guidance system
VIDEOS
Installing Grommets In To Shower Curtain Material
https://vimeo.com/125072496
Installing #2 Self Piercing Grommets In To Clear
Plastic Material
https://vimeo.com/130120600
Ground Braid 1/2” Flat Tinned Copper SMGPW #
00 Grommet Instalation
https://vimeo.com/138199538
Velcro Material 24 Ligne 15mm Ring Snap Installation
https://vimeo.com/181997198
# 12 Curtain Grommets (Designer -Draperies)
https://vimeo.com/169163205
Jean Capped Rivets & Sheet Metal Grommet
Installation On Strap & Material
https://vimeo.com/283080927
MC-20
User Manual / Introduction
5/36
Technical Data (Double)
Special Futures
Suitable for applications on various materials,
including heavy fabrics and sensitive substrates.
Easily interchangeable tooling to apply various sizes
of grommets with a single machine.
Pneumatic Safety System. CE compatibillity.
No need for electricity. Works with air compressor.
Ability to apply even the large size of grommets. #
12 (40mm) curtain grommets.
Capable of applying up to 450 kg of pressure per
square centimeter.
A laser guidance system that marks the grommet
setting point.
All types and sizes of Eyelets, Spring Snaps, Ring
Snaps, Jean Rivets and Jean Buttons.
The digital panel of the MC-20 displays installed
fastener count, and piston stroke settings.
Laser guidance system
VIDEOS
Industrial Metal Hole Piercing Die Installation
https://vimeo.com/240897840
Industrial Die How You Can Pierce The Material
https://vimeo.com/240899250
# 12 Curtain Grommets (Designer -Draperies)
https://vimeo.com/169163205
Four Layers Webbing Material SPGW # 3 12mm
Long Neck
https://vimeo.com/160950954
Jean Capped Rivets & Sheet Metal Grommet
Installation On Strap & Material
https://vimeo.com/283080927
Industrial Dies
https://vimeo.com/239525202
Scope and Purpose
The MC-20 fastener attaching machine is one of the most versatile machines produced by
Micron. The easy to use control panel with the accompanying foot pedal allows users to
quickly set up and make installations. Powerful enough to install large curtain grommets
into various materials, while having superb accuracy thanks to the laser light installed. This
machine can drastically increase the production of any workroom or production line that
it is placed in.
This manual is intended to be used during the initial setup of the MC-20, making the first
installations and to help troubleshoot problems you may face over the life of the machine.
Topics like constructing the table, changing dies and safety will be covered in an easily
digestible format for non-technical operators. Maintenance, repairs and replacing
components will be covered in a more technical manner but in great detail.
Setup Process Overview
During the initial setup of the MC-20, the machine’s table will have to be assembled. Then
the machine will have to be mounted and bolted onto the table. Once the MC-20 and its’
table are properly assembled, the dies will need to be installed. The approach to installing
the dies will vary slightly depending on the size and style of the fastener. You will need to
have a compressor ready to connect to the MC-20 with the hose that is provided. Next
plug the electrical cable into both the outlet and the machine. Ensure that the machine has
been switched on and the emergency stop button has not been depressed. Once these
steps are followed, the MC-20 will be ready for production.
1. Assemble the table and bolt the MC-20 to it.
2. Install the dies.
3. Connect the air hose, electrical cable and foot pedal.
4. Ensure the machine is on and the emergency stop button has not been depressed.
5. Begin installing fasteners.
MC-20
User Manual / Introduction
6/37
MC-20
User Manual / Setup Process Procedures
7/37
The following procedures will guide you step by step while you prepare the MC-20 for
operation. There are several phases but each can be quickly broken down and
accomplished. You will need a set of Allen keys and a set of pliers or the corresponding
wrench size for the nuts.
Assembling the Table and Mounting the MC-20
The following procedure will guide you through setting up the table and mounting the
MC-20. You will need a set of Allen keys and a set of pliers or the corresponding wrench
size for the nuts.
Remove all the contents of the box and layout and
floor
1. Open the rectangular box that contains the table pieces.
2. Remove all the protective packaging, stretch wrap and tape from the pieces.
3. The box contains the following items:
a. Short bolts (8)
b. Long bolts (4)
c. Metal legs (2)
d. Nuts (12)
e. Table (1)
f. Micron cross bars (2)
MC-20
User Manual / Setup Process Procedures
8/37
Assembling the Legs
4. Repeat steps 2-3 for the rear cross bar.
1. Stand both legs perpendicular to the floor and hold one of the cross bars between
the two. (Ensure “Micron” is oriented properly)
2. Align the holes on the cross bar to those of the legs.
3. Insert the short bolts from front to back and secure them with the nuts.
MC-20
User Manual / Setup Process Procedures
9/37
Securing the Table Top to the Legs
1. Place the table on top of the two legs. Ensure that the holes on the legs align
with those of the table.
2. Drop the four long bolts through the table and leg holes.
3. Secure the bolts with nuts.
4. The table is now complete.
MC-20
User Manual / Setup Process Procedures
10/37
1. The box containing the MC-20 must first have the protective cover removed.
1.1 Unscrew all the screws that border the bottom of the box.
1.2 Carefully lift the cover up and off of the machine.
1.3 The box should contain the following
i. MC-20 fastener attaching machine (1)
ii. Red bins (2)
iii. A box containing
1. Foot pedal (1)
2. Spacer bar (1)
3. Pneumatic hose (1)
4. Electrical cable (1)
2. Place the bins and the small box to the side.
Unboxing the MC-20
Inhaltsverzeichnis
Andere Micron Elektrowerkzeuge Handbücher
