micronPC F1500 Bedienungsanleitung
F1500 LCD Monitor
User’s Guide
2
TABLE OF CONTENTS
Monitor User’s Guide .................................................................3
Packing List ................................................................................3
Safety Information......................................................................3
LCD Monitor Features................................................................5
Monitor Features ...................................................................................5
Setup Instructions......................................................................6
Monitor Base .........................................................................................6
Power Cord and Power Adapter............................................................6
Video Cable...........................................................................................8
Adjusting the Viewing Angle .....................................................8
Operating Instructions...............................................................9
General Instructions ..............................................................................9
Cleaning the Monitor..............................................................................9
Front Panel Controls............................................................................10
Accessing the Adjustment Controls.....................................................11
Adjusting the Picture............................................................................12
Monitor Drivers.........................................................................13
Warranty Information ...............................................................13
Features ....................................................................................14
Energy Star Standards ........................................................................14
Plug & Play DDC1/2B Feature.............................................................14
Appendix A —Troubleshooting ..............................................15
Appendix B —VESA Mounting................................................17
Attaching an Optional Wall-Mounting Arm ..........................................17
Appendix C —On-Screen Messages ......................................18
Appendix D —Acceptable LCD Defects .................................19
Appendix E —Monitor Specifications ....................................19
Appendix F —Factory Preset Timing .....................................21
Appendix G —Connector Pin Assignment.............................22
Appendix H —FCC Notice.......................................................23
3
MONITOR USER’S GUIDE
This guide provides important information about operating your monitor.
Before using the monitor, please read the user’s guide thoroughly, and then
save it for future reference.
PACKING LIST
Before setting up and using your monitor, examine the items in the monitor
package. If anything is missing or damaged, please contact MicronPC
immediately. Look for the following items:
• 15” LCD Monitor
• F1500 LCD Monitor User’s Guide
• 100/120 VAC rated Power Cord
• External Power Adapter Brick (12 VDC) and Monitor Base
Note: Save the original shipping carton and packing materials in case you
ever need to transport or ship your monitor. If you transport the monitor
over long distances, completely repackage the monitor in its original
packing material.
SAFETY INFORMATION
• Do not use the monitor near standing bodies of water or in humid
envirionments.
• Set the monitor on a flat, stable surface. Do not place it on an unstable
cart, stand, or table. If the monitor falls, it might injure a person and/or
cause serious damage to the monitor.
• When placing the monitor on a cart or stand, use only a cart or stand
recommended by the manufacturer or sold with the monitor. If you
mount the monitor on a wall or shelf, use a mounting kit approved by the
manufacturer and follow the kit instructions.
• Slots and openings in the back and bottom of the monitor are provided
for ventilation. To ensure reliable operation of the monitor, and to protect
it from overheating, these openings must not be blocked or covered. Do
not place the monitor on a bed, sofa, rug, or similar surface. This
monitor must never be placed near or over a radiator or heat register.
This monitor must not be placed in a built-in enclosure of any kind
unless proper ventilation is provided.
4
• The monitor must only be connected to the AC power source as
indicated on the label. If you are unsure of the type of AC power
available, ask your local power company. Only connect this monitor to a
power outlet that matches the power requirements of this monitor.
• The monitor is equipped with a three-prong, grounded plug (a plug with a
third pin for grounding). For safety purposes, this plug will only fit into a
grounded power outlet. If your outlet does not accommodate the three-
wire plug, have an electrician install the correct type of outlet, or use an
adapter to ground the appliance safely.
• During a lightning storm, unplug the monitor. Also unplug the monitor
when it will not be used for a long time. This will protect the monitor from
damage due to power surges.
• Do not overload power strips and extension cords. Overloading power
strips and extension cords can result in a fire or electric shock.
• Never push objects of any kind into the monitor through openings. The
objects could touch dangerous voltage points or short out parts, possibly
resulting in an electric shock or a fire hazard.
• Never spill liquid of any kind on the monitor. If this occurs, disconnect
from the power source immediately.
• Do not attempt to service the monitor yourself. Opening or removing the
monitor’s cover can expose you to dangerous voltages and other
hazards. Please refer all servicing to qualified service personnel.
• To ensure satisfactory operation, only use the monitor with UL listed
computers that have the appropriate configured receptacles marked
between 100–240 VAC, Min. 3.5A.
• Do not allow anything to rest on the power cord. Do not place the
monitor where people might walk on the cord.
• Do not place the monitor in direct sunlight, or where it is near excessive
dust or mechanical vibration or shock.
• This monitor is for use only with the included power adaptor (output
12Vdc) that has a UL, CSA listed license.
Warning: To prevent a fire or shock hazard, do not expose the
monitor to rain or moisture. Dangerously high voltages are present
inside the monitor. Do not open the monitor cabinet. Refer servicing
to qualified personnel only.
Warning: Keep all packing materials away from children.
5
LCD MONITOR FEATURES
Monitor Features
• 15-inch (38.1 cm) TFT Color LCD Monitor
• 75 mm x 75 mm VESA Mounting Pad
• EPA ENERGY STAR®
• Ergonomic Design (complies with MPRII)
• Space Saving, Compact Case Design
The following occurrences are normal with an LCD monitor and do not
indicate a problem.
• Due to the nature of the internal fluorescent backlights, the screen may
flicker during initial use. If this occurs, turn off the monitor and then turn
it on again, making sure the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• The LCD screen has an effective pixel count of 99.99% or more. It may
include blemishes of 0.01% or less, such as a missing pixel or a pixel lit
all of the time. Refer to “Appendix D —Acceptable LCD Defects” for
additional details.
• Due to the nature of the LCD screen, an after-image or ghost of the
previous image may remain after switching the image when the same
image is displayed for a long time. In this case, you can recover the
screen slowly by changing the image or turning off the monitor for a few
hours.
• The life of the internal fluorescent backlights used in the LCD monitor is
approximately 10,000 hours. Contact MicronPC technical support or an
authorized dealer for a replacement when the screen is dark, flickering,
or not lighting up. Never attempt to replace the light yourself. Refer
servicing to qualified personnel only.
6
SETUP INSTRUCTIONS
The following sections provide information about attaching the swivel base to
your monitor and using the power cord and video cable.
Monitor Base
To install the monitor base, put the monitor in the base until it snaps into
place. To remove the monitor base, gently turn monitor upside down and
press the two retention clips together to release the base. Pull the base
straight away from the monitor. See Figure 1below.
Install Remove
Figure 1: Installing and Removing the Monitor Base
Power Cord and Power Adapter
Before connecting your monitor’s power cord and adapter, read the
guidelines below:
• Only use the Power Adapter included with your monitor. You should find
the following markings on the Power Adapter included with your monitor:
Manufacturer: Linearity Electronics Co; Ltd.
Model: LAD6019AB4
Output: 12 VDC 4 A
• This monitor has a universal power supply, so it can operate in either a
100/120 VAC or 220/240 VAC voltage area (no user adjustment is
required).
• Make sure the power cord meets the specifications and requirements for
your area. The power cord included with your monitor is rated for
100/120 VAC.
7
To connect the power cord to your monitor and a power source, follow the
steps below:
Caution: If the AC outlet is not grounded (with three holes), install the
proper grounding adapter (not supplied).
1Plug the power cord into the supplied external power adapter brick. Plug
the small end of the power adapter cord (DC Plug) into your monitor’s
power input socket (DC Jack). See Figure 2.
Video Cable
DC Plug
ACPower
Cord
ExternalPower
AdapterBrick
Figure 2: Connecting Cables
2Plug the other end of the power cord into a three-pin AC power outlet or
a UL-approved power strip.
Note: A certified power supply cord must be used with this equipment. The
relevant national installation and/or equipment regulations need to be
considered. Use a cord that meets the following criteria:
• Monitor side must have IEC320-type female, straight plug
• Main side must have IEC320-type male, straight plug
• Wire type must be UL/CSA certified, 18 AWG X 3C
8
Video Cable
The monitor comes with the video cable connection built into the monitor. To
connect the video cable to your computer’s video port, complete the
following steps:
Caution: Do not bend the signal cable excessively, or you might
break the wires inside the cable.
1Plug the video cable's 15-pin connector (see Figure 2on page 7) into the
computer's video port, taking care not to bend any pins on the
connector.
2Tighten the two screws on the video connector with your fingers to
secure the connection.
Note: Over-tightening this connection can damage the monitor cable or
your computer’s video card.
ADJUSTING THE VIEWING ANGLE
• For optimal viewing, look at the full face of the monitor, and then adjust
the monitor’s angle to your own preference.
• Hold the base so the monitor does not fall when you change the
monitor’s angle.
• You are able to adjust the monitor’s angle from -5°to 25°.
-5
25
Figure 3: Adjusting the Monitor’s Angle
Caution: Do not touch the LCD screen when you change the angle, or
the screen may become damaged or broken.
9
Warning: Be careful not to pinch your fingers when adjusting the
monitor’s angle.
OPERATING INSTRUCTIONS
The following sections provide information about operating and adjusting
your monitor.
General Instructions
To turn on the monitor, do the following:
1Check that the power supply is connected to the monitor and a power
outlet or socket.
2Check that the video cable is connected to your computer’s video port.
3Locate the power button (see Figure 4and Table 1on page 10).
4Press the power button. The power indicator will light up. The monitor
features a unique quick-switch system, so a picture should appear within
seconds after the monitor is turned on.
Cleaning the Monitor
To keep the monitor looking new, periodically clean the monitor’s case with a
soft cloth. As a safety precaution, always unplug the monitor before cleaning
it. Stubborn stains on the monitor’s case can be removed using a damp,
dust-free cloth and a mild detergent solution.
Caution: Never use strong solvents, such as thinner, benzene, or
abrasive cleaners, because these will damage the monitor.
To clean the LCD screen, use a damp cloth; however, make sure the
monitor has been turned off first. Never apply water directly to the LCD
screen. Always apply the water to the cloth first, and then wipe down the
screen. You can also purchase and use monitor wipes to clean the LCD
screen.
10
Front Panel Controls
The power button is located on the front panel of the monitor. The buttons to
the left of the power button are for adjusting the monitor’s picture. See
Figure 4and Table 1on page 10 for the layout and names of the control
buttons.
Figure 4: Control Buttons
Table 1: Control Buttons Descriptions
Feature Description
1Auto Config The Auto Config button is used to automatically
set the H-Pos, V-Pos, Clock, and Focus. Press
and hold this button for 2 seconds to begin the
auto config cycle.
2Brightness / Press this button to adjust your monitor’s
brightness. If the OSD is open, this button will
move through the selections in a counter-
clockwise direction.
3Contrast / Press this button to adjust your monitor’s
contrast. If the OSD is open, this button will
move through the selections in a clockwise
direction.
4Menu/Enter Press this button to open the On Screen Display
(OSD) menu or to select an adjustment icon
within the OSD.
Inhaltsverzeichnis
Andere micronPC Monitor Handbücher
