Microseven Systems MSHDVS4CHD Bedienungsanleitung

ProductOperationManual
MSHDVS4CHD 4CH Network Digital Video Server
Microseven Systems, Inc.
Walnut, California 91789, USA

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 2-
First Edition (April 2008)
Copyright Notice
Copyright © 2002-2008 Microseven Systems, Inc.
All Rights Reserved.
Microseven Systems, Inc. provides this operation manual “as is” without warranty of any kind, either
express or implied, including, but not limited to the implied warranties of merchantability and fitness
for a particular purchase. Microseven Systems, Inc. may make improvements and/or changes in the
product(s) and/or the program(s) described in this manual at any time and without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are made
periodically to the information herein; these changes will be incorporated in new editions of this
publication.
Microseven Systems, Inc.
675 Brea Canyon Road, Suite 12
Walnut, California, USA
TEL (909) 598 – 8553
FAX (909) 598 – 1415
Website www.microseven.com
Trademarks
Any product names used herein are for identification purposes only and may be trademarks of their
respective companies. Microseven is a registered trademark of Microseven Systems, Inc.

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 3-
Notes:
Please read the following label before connecting or operating the equipment.
Notes:
Please not move the cover (or back) to reduce
the danger of electric shock. No part inside
can be repaired by users. Refer servicing to
qualified personnel.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of exposed
wiring within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to people
The serial number of this product can be
found on the top of the unit. Please note
the serial number of this unit in the space
provide and retain this book as a
permanent record of your purchase to aid
identification in the event of theft.
Model:
Product №
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Notes:
Please not move the cover (or back) to
reduce the danger of electric shock. No part
inside can be repaired by users. Refer
servicing to qualified personnel.

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 4-
Contents
1. Preface ………………………………………………………………………………… 5
2. Key Features ………………………………………………………………………………… 5
3. Notes …………………………………………………………………………………………… 6
4. Instructions of Main Parts ……………………………………………………………… 7
5. Setup and Application ………………………………………………………………..……… 10
6. Basic System Diagram and Operating Circumstance ………………………………… 14
7. Specification ……………………...…………………………………………………… …… 14
8. Common Questions & Answers ……………………………………………………………… 15

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 5-
1. Preface
MSHDVS4CHD 4CH network digital video server is a digital product based on network
transmission, which adopts embedded real-time multi-tasking operating systems (RTOS) and
embedded CPU processor, and with the function of video signal and audio signal synchronization
compression.
The compressed data is transmitted by network to realize real-time video and audio preview. The
system can be scheduled efficiently. Code solidify in FLASH enables more stable and reliable
system operation.
The excellent H.264 algorithm ensures less data redundancy, which is more suitable for network
transmission, provide RS-485 interface and alarm input and output interfaces.
MSHDVS4HD can be equipped with built-in hard disk to IDE HDD 500 GB.
2. Key Features
2.1 Hardware
1 channel RS485
4 alarm input/output
4 BNC video input
1 RCA audio input
1 RJ45 Ethernet port
1 USB port
1 power port
1 channel RS485
2.2 Software
Adopts H.264 video compression format and G.711 audio compression format, provides 4-
channel video/audio collection, compression and transmission.
Provides I/O control to realize alarm input/output
PTZ control function
Provides management of user, log and alarm report
QCIF/CIF image adjustable, allows NTSC/PAL switch; maximum frame rate: 120fps for NTSC,
and 100fps for PAL; Bit stream: 100Kbps-3Mbps
Alarm functions: alarm input signal, motion detection, alarm linkage output.
Intercom: two-way audio intercommunication.
Static IP, provides Web Server, supports TCP and UDP multicast.
Supports PPPOE; support online upgrade, built-in watch dog.
Support recording & storage of hard disk;

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 6-
3. Notes
A. Keep away from the high-temperature objects and places
B. Avoid direct exposure to sunlight
C. Do not put it at wet places
D. Do not install at the violently shook places
E. Do not put any other equipment on the video server
F. Video server should be installed in a well-ventilated place, and not to block the equipment
vents;
G. Make sure the power cable is well connected before turning on the power switch.
H. Confirm whether install the hard disk during the initial installation, and notice the line jump to
the main disk status;
I. Do not open the box without any professional personnel, please contact manufacturer when
malfunction happens.

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 7-
4. Instructions for Main Parts
4.1 Front Board
A. Definition of Front Board
OFFON
①Alarm indicator【ALARM】
②Network indicator【Ethernet】
③Hard Disk indicator 【HDD】
④System Status indicator【RUN】
⑤Power indicator【POWER】
⑥USB port
⑦Power switch button
B. Indicator Status
POWER(Red)
Normal-On Power on
Normal-Off Power off
RUN(Green)
Flittering Normal operating procedures
Normal-On/
Normal-Off Abnormal operating procedures
Ethernet(Green)
Normal-On Network connected
Normal-Off / Flittering Network unconnected
HDD(Green)
Flittering HDD in writing / reading
Normal-Off HDD no working
ALARM(Red)
Normal-On Alarm signal
Normal-Off No alarm signal

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 8-
4.2 Rear Board
①Power in
②RS-485 interface
③Alarm input/output interface
④Network interface
⑤Audio input interface
⑥Video input interface
4.3 Alarm Port and RS485 Port
A. Alarm input/output and RS485 port definition

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 9-
① Alarm input 1
② Alarm input 2
③ Alarm input 3
④ Alarm input 4
⑤ Alarm input public terminal
⑥ RS485 sending(Tx+)
⑦ RS485 sending(Tx-)
⑧ RS485 receiving(Rx+)
⑨ RS485 receiving(Rx-
⑩ Alarm output public terminal
⑪ Alarm output 1
⑫ Alarm output2 public terminal
⑬ Alarm output 2
⑭ Alarm output3 public terminal
⑮ Alarm output 3
⑯ Alarm output4 public-end
⑰ Alarm output 4
⑱ Reserve
B. Sketch Map for Alarm input/output and RS-485 Port
Note: Both the alarm input and output are I/O, A and B are the 2 ends of the I/O.
Input A
Input B
Output A
Output B

Microseven®MSHDVS4CHD 4CH Network Digital Video Server
© 2002-2008 Microseven Systems, Inc. All Rights Reserved.
- 10 -
5. Setup & Application
"The following is the basic system chart of MSHDVS4CHD network video server.
Video server A Video server B
NetWork
Monitoring
center 1
Alarm input
de icev
OPEN
LO
CK
RS485 Tx
(-)
RS485 Tx
(+)
High speed
dome camera
Microphone
Monitor
Loudspeaker
Alarm output
de icev
Alarm input
de icev
Alarm output
de icev
Monitoring
center 2
Monitoring
center N
5.1 Hardware Setup Steps
Step 1 Checking product and accessories
Step 2 Hard disk setup
Step 3 Set up video server
Step 4 Connect the equipment to network by RJ45 port
Step 5 Connect video source to video input port
Step 6 Connect audio source to audio input port
Step 7 Connect speed dome or PTZ to RS485 port
Step 8 Connect the alarm input/output equipments to alarm port
Step 9 Supply power, equipment running.
Inhaltsverzeichnis
Andere Microseven Systems Server Handbücher
Beliebte Server Handbücher anderer Marken

iRobo
iRobo IPC2U Bedienungsanleitung

Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung

Asus
Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung

HP
HP Integrity rx2600 Installationsanleitung

Milestone
Milestone Husky IVO 350T Bedienungsanleitung












