Page 7 of 8 - Microsoft Confidential -
AC Powered Devices
These precautions apply to all products that are plug into a standard wall power outlet. Failure to
take the following precautions can result in serious injury or death from electric shock or fire or
damage to the device.
To select an appropriate power source for your device:
●Use only the power supply unit and AC power cord that came with your device or that you
received from an authorized repair center.
●Confirm that your electrical outlet provides the type of power indicated on the power supply unit
(in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to
your home, consult a qualified electrician.
●Do not use non-standard power sources, such as generators or inverters, even if the voltage and
frequency appear acceptable. Only use AC power provided by a standard wall outlet.
●Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle.
Confirm that they are rated to handle the total current (in amps [A]) drawn by the device
(indicated on the power supply unit) and any other devices that are on the same circuit.
To avoid damaging the power cords and power supply:
●Protect the power cords from being walked on.
●Protect cords from being pinched or sharply bent, particularly where they connect to the power
outlet, the power supply unit, and the device.
●Do not jerk, knot, sharply bend, or otherwise abuse the power cords.
●Do not expose the power cords to sources of heat.
●Keep children and pets away from the power cords. Do not allow them to bite or chew on them.
●When disconnecting the power cords, pull on the plug—do not pull on the cord.
If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug
your device during lightning storms or when unused for long periods of time.
For devices with an AC power cord that connects to the power supply, always connect the power
cord according to the following instructions:
1Plug the AC power cord into the power supply until it stops.
2Plug the other end of the AC power cord into the wall outlet.
Do Not Attempt Repairs
Do not attempt to take apart, open, service, or modify the hardware device or power supply. Doing
so could present the risk of electric shock or other hazard. Any evidence of any attempt to open
and/or modify the device, including any peeling, puncturing, or removal of any of the labels, will
void the Limited Warranty.
Wireless Devices
Before boarding any aircraft or packing a wireless device in luggage that will be checked, remove the
batteries from the wireless device or turn the wireless device off (if it has an on/off switch). Wireless
devices can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are
installed and the wireless device is turned on (if it has an on/off switch).
For Bluetooth and 2.4GHz devices only: To comply with FCC RF exposure requirements, the
following operating configurations must be satisfied: the antenna has been installed by the manufacturer
and no changes can be made.
Tested to comply with FCC (U.S. Federal Communications Commission) Standards.
For home or office use.
Not intended for use in machinery, medical or industrial applications.
Any changes or modifications not expressly approved by Microsoft could void the user's authority to
operate this device.
This product is for use with NRTL Listed (UL, CSA, ETL, etc.), and/or IEC/EN 60950 compliant (CE
marked) Information Technology equipment
No serviceable parts included.
This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF (+35ºC).
For detailed information on U.S. and Canadian radio interference regulations, search for “regulations” in
on-screen Help installed with the software.
This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission
(FCC) rules, Canadian ICES-003, RSS-Gen, RSS-210 and RSS-310. Operation is subject to the
