Microtronics MyDatalogEASYplus Bedienungsanleitung

User Manual for the portable device

myDatalogEASYplus

Rev. 06 valid from:

lFirmware version: 02v011

lModem version: 03v007

lServer version: 42.2

lHardware version: 2.4

User manual

300052

Microtronics Engineering GmbH | www.microtronics.at

Hauptstrasse 7 | 3244 Ruprechtshofen | Austria

Tel +43 2756 77180 23 | Fax +43 2756 77180 33 | support@microtronics.at

Chapter 1 Table of contents
Chapter 1 Table of contents
User Manual for the portable device myDatalogEASYplus 1
Chapter 1 Table of contents 3
Chapter 2 Declaration of conformity 9
Chapter 3 Specifications 11
Chapter 4 General specifications 13
4.1 Translation 13
4.2 Copyright 13
4.3 General descriptive names 13
4.4 Safety instructions 13
4.4.1 Use of the hazard warnings 14
4.4.2 General safety instructions 14
4.4.3 Safety and preventative measures for handling GSM/GPRS modems 15
4.4.3.1 Safety and precautionary measures for the installation of the GSM/GPRS modem
15
4.4.3.2 Safety measures for installing the antenna 16
4.5 Overview 17
4.5.1 Block diagram 18
4.6 Intended use 18
4.7 General product information 19
4.8 Device labelling 19
4.9 Installation of replacement and wear parts 20
4.10 Storage of the product 20
4.11 Obligation of the operator 21
Chapter 5 Functional principle 23
5.1 Internal processing of the measurement values 25
5.1.1 Filter module 27
5.1.2 Overflow module 27
5.1.3 Scale module (inputs) 28
Rev. 06 3

1.4 Decay module 29
1.5 Hold module 30
1.6 Alarm/trigger module 30
1.7 Control module 31
1.8 Record module 32
1.8.1 Alarm flags 33
1.8.2 Trigger flags 33
1.9 Setpoint module 34
1.10 Scale module (outputs) 35
2 Functionality of the internal data memory 35
3 Procedure in case of connection aborts 36
4 ALOHA transmission mode 37
5 Automatic selection of the GSM network 38
5.1 Ban list 38
Chapter 6 Storage, delivery and transport 41
1 Inspection of incoming deliveries 41
2 Scope of delivery 41
3 Storage 41
4 Transport 42
5 Return 42
Chapter 7 Installation 43
1 Dimensions 43
2 Installing the myDatalogEASYplus 43
2.1 Wall mounting 44
2.2 Top-hat rail assembly 46
2.3 Pipe assembly 47
3 Safety instructions for the cabling 48
3.1 Information on preventing electrostatic discharges (ESD) 48
4 Electrical installation 49
4.1 Connecting the sensors, actuators and power supply 49
4Rev. 06

Chapter 1 Table of contents
4.1.1 Connection examples 53
4.1.1.1 Use of the switchable sensor supply K3 53
4.1.1.2 Use of the direct rechargeable battery or battery voltage output K4 54
4.2 Connecting the GSM antenna 54
4.3 Technical details about the universal inputs 55
4.3.1 0/4 to 20mA mode 55
4.3.2 0 to 2V mode 55
4.3.3 0 to 10V mode 56
4.3.4 Standard digital modes (PWM, frequency, digital, day counter, impulse counter)
56
4.3.5 Low power digital mode (LP digital) 56
4.4 Technical details about the outputs 56
4.4.1 Output1: Switchable sensor supply (Vout) 56
4.4.2 Output 2: Isolated switch contract (NO, CC) 57
4.4.3 Direct rechargeable battery or battery voltage output (Vbatt) 57
4.5 Technical details regarding energy management 57
Chapter 8 Initial Start-Up 59
1 User information 59
2 General principles 59
3 Placing the system into operation 59
4 Testing communication with the device 60
Chapter 9 User interfaces 63
1 User interface on the myDatalogEASYplus 63
1.1 Operating elements 63
1.1.1 Status LED 63
1.1.2 Button 64
1.1.3 Solenoid switch 65
2 User interface on the myDatanet-Server 65
2.1 Site configuration 65
2.1.1 Site 65
Rev. 06 5

9.2.1.2 Comments 65

9.2.1.3 Measurement channels 66

9.2.1.3.1 Basis 66

9.2.1.3.2 Config 68

9.2.1.3.3 Alarms 83

9.2.1.3.4 Trigger 83

9.2.1.4 Calculated channels 84

9.2.1.4.1 Basis 84

9.2.1.4.2 Calculation 86

9.2.1.4.3 Alarms 88

9.2.1.5 Output channels 88

9.2.1.5.1 Basis 88

9.2.1.5.2 Config 92

9.2.1.6 Internal channels 93

9.2.1.6.1 Basis 93

9.2.1.6.2 Alarms 93

9.2.1.6.3 Trigger 94

9.2.1.7 Alarm settings 95

9.2.1.8 Basic settings 96

9.2.1.9 FTP export settings 98

9.2.2 Device configuration 98

9.2.2.1 Comments 98

9.2.2.2 Measurement instrument 98

9.2.2.3 Device-specific settings 100

9.2.2.4 GPRS 101

Chapter 10 myDatanet server 103

10.1 Overview 103

10.1.1 Explanation of the symbols 103

10.2 "Customer" area 104

10.3 "Site" area at customer level 105

6Rev. 06

Chapter 1 Table of contents
3.1 Reports 106
3.2 Map view 106
4 Recommended procedure 106
4.1 Creating the site 106
4.2 Assigning a device to the customer 107
Chapter 11 XML interface 111
1 General 111
Chapter 12 Maintenance 113
1 General maintenance 113
2 Replacing the rechargeable battery or battery pack 113
2.1 Charging the accu pack 116
3 Accu or battery pack 117
Chapter 13 Removal/disposal 119
Chapter 14 Troubleshooting and repair 121
1 General problems 121
2 Log entries and error codes 123
2.1 Modem error 128
3 Evaluating the device log 131
3.1 Evaluating the device log on the myDatanet server 131
3.2 Evaluating the device log using myDatanetDeviceConfig 131
Chapter 15 Spare parts and accessories 133
1 Internal expansions 133
2 Assembly sets 133
3 Antennas 133
4 Rechargeable battery packs and battery packs 134
5 Charging devices and power supply units 134
6 Sensors 134
7 Other accessories 134
Chapter 16 Document history 135
Chapter 17 Glossary 137
Rev. 06 7