Midea FLAIR Bedienungsanleitung

Split Type Room Air Conditioner

CONTENTS

Contact the authorized installer for installation of this unit.

Contact an authorized service technician for repair or maintenance of this unit.

This appliance is not intended for use by persons(including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by

persons responsible for their safety.

Young children should be supervised to ensure that they do not play with the

air conditioner.

If the power cord is to be replaced, replacement work shall be performed by

authorized personnel only.

Installation work must be performed in accordance with the national wiring

standards by authorized personnel only.

CAUTION

SAFETY PRECAUTIONS

NAMES OF PARTS

OPERATING INSTRUCTIONS

CARE AND MAINTENANCE

TROUBLESHOOTING TIPS

Warning .....................................................................................................................................2

Caution ......................................................................................................................................3

Indoor unit ........... .....................................................................................................................4

outdoor unit ...............................................................................................................................4

Indication lamp...........................................................................................................................4

Special functions .......................................................................................................................5

Operating temperature................................................................................................................6

Manual operation ......................................................................................................................6

Airflow direction control ............................................................................................................7

How the air conditioner works ..................................................................................................8

Before maintenance...... ...........................................................................................................9

Cleaning the unit....................................................................................................................... 9

Cleaning the air filter and air freshening filter .......................................................................... 9

Replacement of the air filter and air freshening filter ...............................................................10

Preparation for extended non-operation....................................................................................10

Pre-season inspection...............................................................................................................10

Normal function of the air conditioner.......................................................................................11

Troubleshooting guide .............................................................................................................13

WARRANTY TERMS & CONDITIONS

E-WASTE MANAGEMENT GUIDELINES

WARRANTY CARD

..................................................................................16

..............................................................................14

............................................................................................................. 20

ANNUAL MAINTENANCE CONTRACT .................................................................................15

SAFETY PRECAUTIONS

To prevent injury to the user or other people and property damage, the following instructions

must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage.

The seriousness is classified by the following indications.

This symbol indicates the possibility of death or serious injury.

Meanings of symbols used in this manual are as shown below.

WARNING

Be sure to follow the instructions.

Strictly prohibited.

CAUTION This symbol indicates the possibility of injury or damage to property.

Do not extend the cable and never use

multiple plugs. A poor electrical connection,

poor insulation or voltage which is higher

than permitted can cause fire.

Do not expose your body directly to the cool

air for prolonged period.

Never poke fingers, sticks or other objects

in the air inlet and outlet vents.

Never attempt to repair, relocate, modify the

air conditioner yourself. Always contact your

service partner if it requires.

Never pull the plug out by pulling on the

cable. Hold the plug firmly and pull it out of

the plug socket, otherwise there is a risk of

damaging the cable.

Do not operate your air conditioner in a wet

room such as a bathroom or laundry room.

Remove all dirt from the power plug and

plug it firmly. Soiled plugs can cause fire

or an electric shock.

In the event of any abnormalities such

as smell of burning, immediately swithch

off the device and pull the plug. Contact

your service partner.

Always switch off the device and pull the

plug before you start to clean it.

Use specified power cord.

Contact the authorized installer for

installation of this unit.

Contact an authorized service technician

for repair or maintenance of this unit.

This appliance is not intended for use by

persons(including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure

that they do not play with the air

conditioner.

WARNING

SAFETY PRECAUTIONS

Never actuate any switches with a wet

hand. It may cause an electric shock.

Never use the device for any other

purpose than the intended use. Never

place food, precision instruments, plants,

animals, paint, etc. on the unit.

Do not expose plants or animals directly

to the air flow.

Never clean the air conditioner with water.

Never use combustible cleaning agents

as these could cause a fire or deformation.

Never place any burning objects close to

the device if they could be directly affected

by the emitted air.

Never step onto the outdoor device and

never place anything on it.

Never use an unsteady or rusty base.

Never install the air conditioner in places

where combustible gas can be emitted.

Emmitted gas may collect and cause an

explosion.

Never allow the air conditioner to run for

too long with the doors or windows open,

or if the humidity is very high.

If the air conditioner is to be used in

conjunction with other heaters, the air

should be refreshed periodically, otherwise

there is a risk of lack of oxygen.

Always pull out the power plug if the unit

is not going to be used for any lengthy

period of time. Collections of dust can

cause fire.

Always switch off the air conditioner and

pull out the power plug during a storm.

Electrical parts may get damaged.

Check that the drainage line is correctly

connected. If not, water will escape.

Check that the condensation water can

run off unhindered. It may cause water

damage if the condensation water cannot

run off properly.

The air conditoner must be earthed in

accordance with the local codes.

For electrical safety purposes we

recommend that you install an earth-

leakage circuit-breaker.

If the power cord is damaged, it must be

replaced by the manufacturer, its service

agent or similary qualified persons in order

to avoid a hazard.

CAUTION

NAME OF PARTS

8. Connecting pipe

9. Connecting cable

10. Stop valve

Outdoor unit

Air inlet(rear)

Air inlet(side)

Air outlet

1. Front panel

2. Air inlet

3. Air filter

4. Air outlet

5. Horizontal air flow grille

6. Vertical air flow louver(inside)

7. Display panel

Indoor unit

The display window of the indoor unit

may look like one of the follwing:

Display Window

FLAIR & FLAIR - X

OPERATION indication lamp

This lamp illuminates when the air

conditioner is in operation.

TIMER indication lamp

Lights up during Timer operation.

DEFROST indication lamp

(Enabled on cooling & heating models only):

Lights up when the air conditioner starts

defrosting automatically or when the warm

air control feature is activated in heating

operation.

TEMPERATURE indication lamp(optional)

Displays the temperature settings when the

air conditioner is operational.

Displays the malfunction code when fault

occurs .

FRESH indication lamp(optional)

Lights up when Clean Air feature is

activated.

Indication lamp

NOTE:

All the pictures in this manual are for

explanation purposes only. The actual shape

of the indoor unit you purchased may be slight

different on front panel and display window.The

actual shape shall prevail.

Names of parts

ETERNA

Signal receiver

OPERATING INSTRUCTIONS

Special functions

Improving the quality of indoor air is one of the purposes of an air conditioner. This air

conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specific

configuration of the model). With the anions generated by Ionizer, the air circulation

of the air conditioner fills the room with refreshing, natural and healthy air. The Plasma

Dust Collector generates a high voltage ionization zone, through which the air is

converted to plasma. Inside the air most of the dust, smoke, and pollen particles are

captured by the electrostatic filter.

CLEAN AIR function(on some models)

Function used after the shut down of cooling operation to clean the Evaporator

,it keeps the air fresh for the next operation.

For cooling models, the unit will operate under FAN ONLY mode

at LOW fan speed for half an hour, and then turn off automatically.

For cooling & heating models, the unit will operate as in the below sequence :

FAN ONLY mode at Low fan speed--Heating operation with LOW fan speed

---FAN ONLY operation--Stop Operation---Turn off.

Note:

This function is only available under COOL(AUTO COOL, FORCED COOL) and

DRY mode.

Before selecting the function, it is recommended to run the air conditioner under

cooling operation for about half an hour. Once the Self Clean function is activated,

all TIMER setting will be cancelled.

During SELF CLEAN operation, when pressing the SELF CLEAN button on the remote

controller again,the unit will stop the operation and turn off the unit automatically.

SELF CLEAN function(Optional)

Refrigerant Leakage Detection

With this new technology, the dipsplay area will appear EC and the indication lamps

continue flashing when the outdoor unit detects refrigerant leakage.

Anti-mildew function(Optional)

When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue

operating for about 10 minutes (depending on models) with soft wind.This will help to

dry up the condensed water inside the evaporator, and prevent the breeding of mildew.

Under Anti-mildew operation, do not restart the air conditioner until the unit iscompletely off.

Louver Angle Memory Function(optional):

Within the scope of safety angle, it will memorize the open angle of horizontal louver.

If it exceeds, it will memorize the boundry of safety angle. In the following

circumstances, it will return to standard angle: 1) pressing the turbo or manual control

button, 2)unplug and then plug in the machine. So we strongly suggest that the open angle

of the horizontal louver should not be set too small, in case the condensed water forms and

drops from the horizontal louver.

OPERATING INSTRUCTIONS

NOTE: This manual does not include Remote Controller Operations, see the

<<Remote Controller Instruction>> packed with the unit for details.

Operating temperature

Mode Cooling operation Heating operation Drying operation

Temperature

1. Optimum performance will be achieved within these operating temperatures.If air

conditioner is used outside of the above conditions, certain safety protection features

might come into operation and cause the unit to function abnormally.

2. Room relative humidity less than 80%. If the air conditioner operates in excess of this

figure, the surface of the air conditioner may attract condensation. Please sets the vertical

air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.

Room temperature

Outdoor temperature

NOTE:

17 32

62 90 0 30

32 86

-7 24

20 76

18 43

64 109

-7 43 20 109

( For the models with low

temperature cooling system

18 52 64 126

(For special tropical models)

10 32 50 90

(For special tropical models)

11 43 52 109

18 52 64 126

Units are equipped with a switch to run emergency operation mode. It can be accessed by

opening the front panel. This switch is used for manual operation in case the remote controller

fails to work or maintenance necessary.

Manual operation

Hold the panel sides and lift the front panel

up to an angle until it remains fixed with a

clicking sound.

Once you push the manual switch, the

operation mode is shifted in an order as:

AUTO, COOL, OFF. The temperature will

O O

be set at 24 C/76 F and the fan on Auto.

After operation, close the panel firmly to its

original position.

This switch is used for testing purposes

only. You had better not choose it.

To restore the remote controller operation,

use the remote controller directly.

CAUTION:

•

AUTO/COOL

Suspension bars

AUTO/COOL

(1)

(2)

Manual switch

OPERATING INSTRUCTIONS

Airflow direction control Adjust the air flow direction properly, otherwise it might

cause discomfort or cause uneven room temperatures.

Adjust the horizontal louver using the remote controller.

Adjust the vertical louver manually or using the remote

controller(depending on models).

To set the vertical air flow(Up--Down) direction

Perform this function while the unit is in operation.

Use the remote controller to adjust the air flow

direction. The horizontal louver can be moved at

a range of 6 for each press, or swing up and down

automatically. Please refer to the REMOTE

CONTROLLER OPERATION MANUAL for details.

To set the horizontal air flow direction (left - right)

Move the deflector rod manually to adjust the air flow

in the direction you prefer.

IMPORTANT:Do not put your fingers into the panel of

blower and suction side.The high-speed fan inside may

cause danger.

For some models, the vertical louver can be adjusted

by using the remote controller. Please refer to the

REMOTE CONTROLLER OPERATION MANUAL

for details.

Range

Deflector rod

Do not operate the air conditioner for long periods with

the air flow direction set downward in cooling or

dehumidifying mode. Otherwise, condensation may

occur on the surface of the horizontal louver causing

moisture to drop on to the floor or on furnishings.

When the air conditioner is started immediately after it

was stopped, the horizontal louver might not move for

approximately 10 seconds.

Open angle of the horizontal louver should not be set

too small, as COOLING or HEATING performance may

be impaired due to too restricted air flow area.

Do not move the horizontal louver manually, otherwise

the horizontal louver will be out of sync. Please cease

operating, unplug power for a few seconds,then restart

the air conditioner.

CAUTION

NOTE:

Best working conditions(the energy efficiency can be

affected if not set under these conditions):

The best angle of louvers is the default angle of cooling

mode

The best way of setting the angle of louvers at heating

mode is: run the unit for 5 minutes and then use the

remote controller to set the louvers at the default angle

of cooling mode.

OPERATING INSTRUCTIONS

How the air conditioner works

1 hour

Set

Temperature

Set

Temperature

Cooling

Heating

SLEEP operation

1 hour 1 hour

SLEEP operation

7 hours timer off

AUTO operation

When you set the air conditioner in AUTO mode, it will

automatically select cooling, heating(cooling/heating

models only), or fan only operation depending on set

temperature and the room temperature.

The air conditioner will control room temperature

automatically to the temperature point you set.

If you feel uncomfortable in the AUTO mode, you can set

your desired temperature.

SLEEP operation

When you push SLEEP button on remote controller

during cooling, heating(cooling & heating models only),

or AUTO operation , the air conditioner will

automatically increase (cooling) or decrease (heating)

O O

1 C/2 F per hour for the first 2 hours, then hold

steadily for the next 5 hours, after that it will switch off.

This mode saves you energy and brings you comfort

at night.

DRYING operation

The temperature is regulated while dehumidifying by

repeating turning on and off of the cooling operation or

fan only. The fan speed is LOW.

Optimal operation

To achieve optimal performance, please note the

following:

Adjust the air flow direction correctly so that it is not

forwards people.

Adjust the temperature to achieve the highest comfort

level. Do not adjust the unit to excessive temperature

levels.

Close doors and windows on COOL or HEAT modes,

or performance may be reduced.

Use TIMER ON button on the remote controller to

select a time you want to start your air conditioner.

Do not put any object near air inlet or air outlet, as the

efficiency of the air conditioner may be reduced and

the air conditioner may stop running.

Clean the air filter periodically, otherwise cooling or

heating performance may be reduced.

Do not operate unit with horizontal louvre in closed

position.

CARE AND MAINTENANCE

Care and Maintenance

Filter Handle

Before mainatenance

A cloth dampened with cold water may be used

on the indoor unit if it is very dirty. Then wipe it

with a dry cloth.

Do not use a chemically treated cloth or duster to

clean the unit.

Do not use benzine, thinner, polishing powder, or

similar solvents for cleaning. These may cause

the plastic surface to crack or deform.

Never use water hotter than 40 C/104 F to clean

the front panel, it could cause deformation of

discoloration.

CAUTIONS

Turn the system off before cleaning. To clean, wipe with

a soft, dry cloth. Do not use bleach or abrasives.

NOTE: Power supply must be disconnectd before

cleaning the indoor unit.

Cleaning the unit

wipe the unit with a soft dry cloth only. If the unit is

very dirty, wipe it with a cloth soaked in warm water.

Cleaning the air filter and air freshening filter

A clogged air filter reduces the cooling efficiency of

this unit. Please clean the filter once every 2 weeks.

1. Lift the indoor unit panel up to an angle until it

stops with a clicking sound.For some models,

please use suspension bars to prop up the panel.

2. Take hold of the handle of the air filter and lift it

up slightly to take it out from the filter holder,

then pull it downwards.

3. Remove the AIR FILTER from the indoor unit.

Clean the AIR FILTER once two weeks.

Clean the AIR FILTER with a vacuum cleaner

or water, then dry it up in cool place.

4. Remove the Air Freshening Filter from its supporting

frame (on some models).

Clean the air freshening filter at least once a

month, and replace it every 4-5 months.

Clean it with vacuum cleaner, then dry it in cool

place.

Air freshening filter

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Midea Klimaanlage Handbücher

Midea

Midea Corona MSC-07CRN1 Betriebsanleitung

Midea

Midea 9V SERIES Bedienungsanleitung

Midea

Midea MTA-76CRN1 Bedienungsanleitung

Midea

Midea MB-09N8D6-i Bedienungsanleitung

Midea

Midea MS9A-09HRDN1-MP0W Bedienungsanleitung

Midea

Midea V6R Series Bedienungsanleitung

Midea

Midea MSF3-07CRN2 Bedienungsanleitung

Midea

Midea MUB-12HRDN1-Q Bedienungsanleitung

Midea

Midea Split Type Room Air Conditioner Bedienungsanleitung

Midea

Midea MW-07CM8C Reparaturanleitung

Midea

Midea CS494-U Bedienungsanleitung

Midea

Midea Everstar MPM-05CE-BB7 Bedienungsanleitung

Midea

Midea MEU-18MPH2 Bedienungsanleitung

Midea

Midea MTIU-12HWFNX-QRD0W Bedienungsanleitung

Midea

Midea AIR CONDITIONER Bedienungsanleitung

Midea

Midea MAW08V1QWT Bedienungsanleitung

Midea

Midea MUBU-12HRFN1-M Bedienungsanleitung

Midea

Midea MD-CCM04/E Bedienungsanleitung

Midea

Midea MSR1-24HRDN1-QC2W Bedienungsanleitung

Midea

Midea CLIVET CRISTALLO Referenzhandbuch

Midea

Midea MPPD40C Bedienungsanleitung

Midea

Midea INVERTER SPLIT TYPE ROOM AIR CONDITIONER Bedienungsanleitung

Midea

Midea MKA-V1500F Bedienungsanleitung

Midea

Midea MSMBA-07HRN1 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung