Midea MWF1-06CR-1 Bedienungsanleitung

OOW/WALL

AiR- CO TYPE

iTiO

MULTI-STEP SPEED ELECTRONIC CONTROL

Model:

MWFI=06CR=I

MWFI=10CR=I MWFI=08CR=I

MWF=12CR

WE_TPO_NTE

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

1. SAFETY PRECAUTIONS .................................................................. 2

2. iMPORTANT SAFETY iNSTRUCTiONS .......................................... 4

3. NORMAL SOUNDS ........................................................................... 5

4. AiR CONDiTiONER FEATURES ....................................................... 5

5. iNSTALLATiON iNSTRUCTiONS ...................................................... 10

6. CARE AND CLEANING .................................................................... 14

7. TROUBLESHOOTING TiPS ............................................................... 15

Read This Manual

Inside you will find many helpful hints on how to use and maintain your air conditioner

properly. Just a little preventive care on your part can save you a great deal of time

and money over the life of your air conditioner. You'll find many answers to common

problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting

Tips first, you may not need to call for service at all.

CAUTION

• Contact the authorized service technician for repair or maintenance of this unit.

o Contact the installer for installation of this unit.

• The air conditioner is not intended for use by young children or infirm persons

without supervision.

• Young children should be supervised to ensure that they do not play with the air

conditioner.

• If the power cord is to be replaced, replacement work shall be performed by

authorised personnel only.

• Installation work must be performed in accordance with the national wiring

standards by authorized personnel only.

To prevent injury to the user or other people and property damage, the following instructions

must be followed. Incorrect operation due to ignoring of instructions may cause harm or

damage. The seriousness is classified by the following indications.

Iik WARNIN G

i/_CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to property.

[] Meanings of symbols used in this manual are as shown below.

I Q Never do this.

Always do this.

!A WAR.I.G)

• Otherwise, it may cause electric

shock or fire due to excess heat

generation.

• It may cause electric shock or fire • It may cause electric shock or fire.

due to heat generation. • If the power cord is damaged, it

must be replaced by the manufac-

turer or an authorized service

center or a similarly qualified per-

son in order to avoid a hazard.

• It may cause electric shock or

fire due to heat generation.

• Incorrect grounding may cause

electric shock.

• It may cause electric shock. • This could damage your health.

• It may cause failure of machine • Incorrect installation may cause

or electric shock, fire and electric shock.

e It may cause fire and electric

shock.

• It may cause fire.

• It may cause fire and electric

shock.

• It may cause fire and electric

shock.

• It may cause explosion, fire and, burns.

• It may cause electric shock.

•It may cause an explosion or fire.

• It may cause failure and electric shock.

I\ CAUTION I

• It may cause an injury. • Water may enter the unit and

degrade the insulation. It may

cause an electric shock.

® Do not clean unit when

power is on as it may cause

fire and electric shock, it may

cause an injury.

o Operation with windows

opened may cause wetting

of indoor and soaking of

household furniture.

® It may cause failure of

appliance or accident.

®This could injure the pet or

plant.

• It may cause electric shock

and damage.

• An oxygen shortage may occur.

® Do not use this air conditioner to

preserve precision devices, food,

pets, plants, and art objects.

It may cause deterioration ot

quality, etc.

• It may cause failure of product

or [ire.

• If bracket is damaged, there

is concern of damage due to

falling of unit.

• Appearance may be

deteriorated due to change

of product color or

scratching of its surface.

®There is danger of fire or

electric shock.

o Operation without filters may

cause failure.

• It contains contaminants and

could make you sick.

The power supply cord with

this air conditioner contains a current

detection device designed to reduce

the risk of fire.

Please refer to the section'Operation

of Current Device'for details.

In the event that the power supply

cord is damaged, it cannot be

repaired-it must be replaced with a

cord from the Product Manufacturer.

not, underany "_

circumstances, cut, I

remove, or bypass |

theg g I)

Power supply cord

with 3-prong grounding plug

and current detection device

For your safety

• Do not store or use gasoline or other flammable vapors and liquids in

the vicinity of this or any other appliance.

• Avoid fire hazard or electric shock. Do not use an extension cord or an

adaptor plug. Do not remove any prong from the power cord.

Electrical Information

® Be sure the electrical service is adequate for the model you have

chosen. This information can be found on the serial plate, which

is located on the side of the cabinet and behind the grille.

® Be sure the air conditioner is properly grounded. To minimize

shock and fire hazards, proper grounding is important. The power

cord is equipped with a three-prong grounding plug for protection

against shock hazards.

® Your air conditioner must be used in a properly grounded wall

receptacle. If the wall receptacle you intend to use is not adequately

grounded or protected by a time delay fuse or circuit breaker,

have a qualified electrician install the proper receptacle.

® Ensure the receptacle is accessible after the unit installation.

• Do not run air conditioner without side protective cover in place.

This could result in mechanical damage within the air conditioner.

Do not use an extension cord or an adapter plug.

Operation of Current Device

The power supply cord contains a current device that senses damage to the power cord. To test your power

supply cord do the following:

1. Plug in the Air Conditioner.

2. The power supply cord will have TWO buttons on the plug head. Press the TEST button, you will notice a

click as the RESET button pops out.

3. Press the RESET button, again you will notice a click as the button engages.

4. The power supply cord is now supplying electricity to the unit. (On some products this it also indicated by

a light on the plug head.)

NOTES:

• Do not use this device to turn the unit on or off.

• Always make sure the RESET button is pushed in for correct operation.

• The power supply must be replaced if it fails reset when either the TEST button is pushed, or it cannot be

reset. A new one can be obtained from the product manufacturer.

• If power supply cord is damaged, it cannot be repaired. It MUST be replaced by one obtained from the

product manufacturer.

Sound of Rushing Air

At the front of the unit, you may

hear the sound of rushing air _

being moved by the fan

Gurgle/Hiss

"Gurgling or hissing"noise may

be heard due to refrigerant

passing through evaporator

during normal operation.

High Pitched Chatter

High efficiency compressors

may have a high pitched chatter

during the cooling cycle. Vibration

Unit may vibrate and make noise

because of window

,poor wall or

_onstruction or incorrect installation.

Pinging or Switching

Droplets of water hitting condenser

during normal operation may cause

"pinging or switching"sounds.

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below

and all its functions, then follow the symbol for the functions you desire. The unit can be controlled

by the unit control alone or with the remote.

ADJUSTS

TEMPERATURE

OR TIME

TIMER

TEMPERATURE

OR TIME

DISPLAYS

TEMPERATURE

OR TIME

RESET BUTTON CLEAN AIR MODE

(on some models)

SETS MODE

FOLLOW ME INDICATOR

(on some models)

ENERGY TURNS UNIT

SAVER MODE ON OR OFF

UNIT CONTROL

AiR CONDiTiONER FEATURES(CONTINUED)

NOTE: The following instructions represent the Unit Controls, the same instructions can be used

for the Remote Control.

TO TURN UNITON

OnlOff

DO THIS:

Press the On/Off button.

TO CHANGE TEMPERATURE

SETTING

DO THIS:

Press to raise

Press to lower

NOTE:

Press or hold either Left(<) or Right (>) button

until the desired temperature is seen on the

display. This temperature will be automatically

maintained anywhere between 62°F(17°C) and

88°F(30°C). If you want the display to read the

actual room temperature, see"To Operate on

Fan Only'section.

TO ADJUST FAN SPEEDS

Auto f'_ Auto

Fan High

E_aeregrY On/Off

DO THIS:

_ Press to select

appropriate fan

speed

NOTE:

Used to select the Fan Speed in four steps-

Auto, Low, Med or High. Each time the button

is pressed, the fan speed mode is shifted.

AiR CONDITIONER FEATURES(CONTINUED)

TO SELECT THE

OPERATING MODE:

TO USETHE ENERGY

SAVER FEATURE:

_#_ on/off

DO THIS:

I Press the Mode

button.

DO THIS:

jPress the button

NOTE:

• To choose operating mode, press the Mode button.

Each time you press the button, a mode is selected

in a sequence that goes from Auto, Cool, Dry and

Fan. The indicator light beside will be illuminated

and remained on once the mode is selected.

To operate on Auto feature:

o In this mode, the fan speed cannot be adjusted, it

starts automatically at a speed according to the

room temperature. If the room does not get too

warm, it will stay at Low speed.

To operate on Fan Only:

• Use this function only when cooling is not desired,

such as for room air circulation or to exhaust stale

air(on some models). (Remember to open the vent

during this function, but keep it closed during

cooling for maximum cooling efficiency.) You can

choose any fan speed you prefer.

e During this function, the display will show the actual

room temperature, not the set temperature as in the

cooling mode.

NOTE:

In this mode, the fan will continue to run for 3 minutes

after the compressor shuts off. The fan then cycles

on for 2 minutes at 10 minute intervals until the room

temperature is above the set temperature, at which

time the compressor turns back on and cooling stars.

SLEEP FEATURE:

) off

Sleep

I uto

Low

Med

High

-- DO THIS:

Press Sleep

button

NOTE:

In this mode the selected temperature will increase by

2 degrees F 30 minutes after the mode is selected.

The temperature will then increase by another 2

degrees F after an additional 30 minutes. This new

temperature will be maintained for 7 hours before it

returns to the originally selected temperature. This

ends the Sleep mode and the unit will continue to

operate as originally programmed. The Sleep mode

program can be cancelled at any time during operation

by again pressing the Sleep button.

AiR CONDITIONER FEATURES(CONTINUED)

TIMER: AUTO START/

STOP FEATURE:

Dry _jj>/ Med

DO THIS:

---Press Timer

button

NOTE:

•First press the Timer button, the indicator light

besides word On illuminates, It indicates theAuto

Start program is initiated,

o Press or hold the Left arrow or Right arrow to change

theAuto time by 0,5 hour increments, up to 10 hours,

then at 1 hour increments up to 24 hours, The control

will count down the time remaining until start,

• The selected time will register in 5 second and the

system will automatically revert back to display the

previous temperature setting,

e Turning the unit ON or OFF at any time will cancel the

Auto Start/Stop function,

CHECK FILTER FEATURE

) Off

Check

Filter

/DO THIS:

/Press Check

Filter button

NOTE:

This feature is a reminder to clean the Air Filter for

more efficient operation, The LED(light) will illumi-

nate after 250 hours of operation, To reset after

cleaning the filter, press the Check Filter button and

the light will go off,

CLEAN AIR FEATURE:

(on some models)

) Off

DO THIS:

---Press Clean

Air button

NOTE:

Press the Clean Air button, the ion generator is ener-

gized and will help to remove pollen and impurities

from the air, and trap them in the filter,

AiR CONDiTiONER FEATURES(CONTINUED)

FOLLOW ME FEATURE: NOTE:

(on some models) This feature can be activated from the remote

Light flashing

control ONLY. The remote control serves as a

remote thermostat allowing for the precise

temperature control at its location.

To activate the Follow Me feature, point the remote

control towards the unit and press the Follow Me

button. The remote display is actual temperature

at its location. The remote control will send this

signal to the air conditioner every 3 minutes interval

until press the Follow Me button again. Iftheunit

does not receive the Follow Me signal during any 7

minute interval, the unit will beep to indicate the

Follow Me mode has ended.

The actual temperature can be displayed at the unit

by pressing the Fan Only mode. When in the Cool

mode, the unit display indicates the set temperature.

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that

you should become familiar with.

• The Cool circuit has an automatic 3 minute time delayed start if the unit is turned off and on

quickly. This prevents overheating of the compressor and possible circuit breaker tripping.

The fan will continue to run during this time.

o The control will maintain any set temperature within 2°F, between 60°F and 90°F degrees.

• The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.

To convert from one to the other, press and hold the Left and Right Temp/Timer buttons at the

same time, for 3 seconds.

Fresh Air Vent Control(on some models):

Figure 1 (VENT CLOSED)

Figure 2 (VENT OPEN)

The Fresh Air Vent allows the air conditioner to:

1, Recirculate inside air- Vent Closed (See Fig,l)

2. Draw fresh air into the room- Vent Open (see Fig.2)

3, Exchange air from the room and draws fresh air into

the room - Vent and Exhaust Open (see Fig.3)

Figure 3 (VENT & EXHAUST OPEN)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Midea Klimaanlage Handbücher

Midea

Midea 4M-82K Bedienungsanleitung

Midea

Midea MSE-09CRN1-BQ8W Bedienungsanleitung

Midea

Midea M thermal Mono Series Dimensionsleitfaden

Midea

Midea mcd-24hrdn1 Bedienungsanleitung

Midea

Midea Comfee MPPHA-05CRN7 Bedienungsanleitung

Midea

Midea MDV-D28Q1/BN2 Bedienungsanleitung

Midea

Midea MSR1-09HRN1-QC2 Bedienungsanleitung

Midea

Midea MS9A-07HRN1-QB6 Bedienungsanleitung

Midea

Midea MP08DRWBA1RCM Bedienungsanleitung

Midea

Midea CLIVET CRISTALLO Referenzhandbuch

Midea

Midea MSY-09HRDN1-QC8 Bedienungsanleitung

Midea

Midea MSH-07CR Bedienungsanleitung

Midea

Midea ATOM MDV-V28WDHN1 Bedienungsanleitung

Midea

Midea MUBU-12HRFN1-M Bedienungsanleitung

Midea

Midea MTIU-18FNXD0 Bedienungsanleitung

Midea

Midea MDV-V105W/DN1 Betriebsanleitung

Midea

Midea MS9A-05CR-QD0 Bedienungsanleitung

Midea

Midea MUB-36HRDN1 Bedienungsanleitung

Midea

Midea PD Bedienungsanleitung

Midea

Midea MKA-V1500F Bedienungsanleitung

Midea

Midea EasyCool MPF08CR81-E Bedienungsanleitung

Midea

Midea MLCAC-UTSM-2010-10 Bedienungsanleitung

Midea

Midea MTIU-12HWFNX-QRD0W Bedienungsanleitung

Midea

Midea MS-09HRF8B Sicherheitsleitfaden

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung