Midea R05/BGE Bedienungsanleitung

Control System

USER MANUAL for RM05/BGE; RM05/BG (T) E-A

Remote controller specifications

Model R05/BGE; RM05/BG (T) E-A

Rated Voltage 3.0V(2 pieces of LR03 7# batteries)

Lowest Voltage 2.4V

Effective Distance 8M~11M

Operation Condition -5℃~60℃

Performance Features

1. Operating Mode: COOL HEAT DRY FAN and AUTO.

2. Timer Setting Function in 24 hours.

3. Indoor Setting Temperature Range: 17°C ~30°C.

4. LCD (Liquid Crystal Display) of all functions.

5. Night Light Function

1.2.1 Parts name

TIME ON

TI ME OF F

CLOCK

SWIN G

AIRDIRE CTI ON

ECO

SW I N G

MODE FAN

SPEED

AUTO

COOL

DRY

HEAT

FAN

TE M P

SET

Control System

(1) Mode Button

Once pressing, running mode will be selected in the following sequence:

Notes: No heating mode for cool only type unit.

(2) FanSpeed

Fan speed will be selected in following sequence once pressing this button:

(3) Adjust button ▼

Decrease the set temp. Keeping pressing will decrease the temp with 1℃per 0.5s.

(4) Adjust button ▲

Increase the set temp. Keeping pressing will increase the temp with 1℃per 0.5s.

(5) ON/OFF button

For turning on or turning off the air conditioner.

(6) Air Direction

Activate swing function of air deflector. Once pressing, air deflector will turn 6℃. For normal operation and

better cooling and heating effect, deflector will not turn to the degree which is the state of deflector when the

unit is turned off (Only available when remote controller is used with corresponding unit.)

(7) Horiz Swing

Activate or turn off horizontal swing function. (Only available when remote controller is used with

corresponding unit.)

(8) Vert Swing

Activate or turn off vertical swing function. (Only available when remote controller is used with corresponding

unit.)

(9) Clock

Display the current time. (12:00 is displayed when resetting or electrifying for the first time.) Press CLOCK for

5s, icon indicating hour will flash with 0.5s. Press it again, and are used to adjust the figure. Setting or

modification is effective onlyby pressing OK button to make confirmation.

(10)Time ON

For time ON setting. Once pressing this button, the time will increase by 0.5 hour. When the set time

exceeds10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00 will cancel

time ON setting.

(11)Time OFF

For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the set time

exceeds10 hours, pressing the button will increase the time by 1 hour. Adjust the figure to 0.00 will cancel time

ON setting.

(12)Reset Button(inner located)

Press this button with a needle of 1mm to cancel the current setting and reset remote controller.

(13)Lock Button(inner located)

Press this button with a needle of 1mm to lock or unlock the current setting.

A UTO CO OL DR Y HE AT FA N → → → →

AUTO→LOW→MED→HIGH

Control System

(14)OK button

Used to confirm the time setting and modification.

(15)COOL/HEAT (inner located)

Press this button with a needle of 1mm to shift mode between COOL only and COOL&HEAT.

During setting, backlight will be lightened. Factory default mode is COOL &HEAT.

(16)ECO Button

Activate or turn off economic operation mode. It is suggested to turn on this function when sleeping. (Only

available when remote controller is used with corresponding unit.)

1.2.2 LCD display

Notes: RM05/BG(T)E-A is able to set the indoor units’ addresses individually.

1.2.3 How to set address through Wireless Remote Controller RM05

●Press the LOCK button for more than 5 seconds, then the controller gets into address setting mode.

●Press the ON/OFF button to start transmitting signal in the address setting mode. If the transmitting signal

icon has been turned on, then step can be omitted. When working in address setting mode, press ON/OFF

will not turn the controller off.

●In the address setting mode, there are 2 main functions:

Querying address: Please point the remote controller to the indoor unit, then press MODE button, the

corresponding indoor unit will display its address.

Setting address: Use the UP and DOWN buttons to choose an address you want. Then point the remote

controller to the indoor unit and then press the FAN button to set the indoor unit’s address. The

corresponding indoor unit will display the new address and record it. After about 4 seconds, this displaying

will fade out and the indoor units turn to normal display mode.

Note: the address cannot be repeated in the same system

● After setting all the addresses, users can press the LOCK button for 5 seconds to exit the address setting

mode.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Midea Fernbedienung Handbücher

Midea

Midea RG51G/E Bedienungsanleitung

Midea

Midea RG58D/BGEFU1 Bedienungsanleitung

Midea

Midea MPPD25C Bedienungsanleitung

Midea

Midea RG58N2(B2H)/BGEF Bedienungsanleitung

Midea

Midea RG57A6/BGEF Bedienungsanleitung

Midea

Midea R51I5/BG(C)E Bedienungsanleitung

Midea

Midea RG51A(2)/E Bedienungsanleitung

Midea

Midea KJR-120X/TFBG-E Montageanleitung

Midea

Midea R51 Bedienungsanleitung

Midea

Midea CR034-RG36F Bedienungsanleitung

Midea

Midea RG57H(B)/BG(C)E Bedienungsanleitung

Midea

Midea CR090-RG52A Bedienungsanleitung

Midea

Midea RG58B2/BGE Bedienungsanleitung

Midea

Midea CS369-R51I4 Bedienungsanleitung

Midea

Midea RG57A3 Bedienungsanleitung

Midea

Midea KJR-12B/DP-F Series Bedienungsanleitung

Midea

Midea RG35A2/BGCEF Bedienungsanleitung

Midea

Midea RG10A(B2S)/BGEF Bedienungsanleitung

Midea

Midea RG70E2(2)/BGEFU1 Bedienungsanleitung

Midea

Midea RG58N2/BGEF Bedienungsanleitung

Midea

Midea RM12D Montageanleitung

Midea

Midea KJR-12B/DP-F-1 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung