Miele G 893 Bedienungsanleitung

Installation instructions

for freestanding, built-under and

integrated dishwashers

It is essential to read the operating and

installation instructions before

installing or using the machine,

to avoid the risk of accident or

damage to the machine.

M.-Nr. 05 565 043

These installation instructions apply to several different dishwasher models.

Model numbers in this booklet refer to the model designation specified

on the data plate on the machine (and not the description on the control

panel). The data plate is located at the top of the door when open.

The model numbers quoted refer only to the basic model number, e.g. the

G 641 SCi is described as the G 641 in this booklet.

It is essential to read the Warning and Safety Instructions in the Operating

Instruction booklet before installing the dishwasher.

Installing a freestanding dishwasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing integrated "i" Dishwashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1. Fitting protective cover plate to worktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2. Fitting the facia panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3. Building the dishwasher into a niche. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Securing pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Angle connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4. Matching the facia panel to the height of adjacent drawer fronts . . . . . . . . . . 13

5. Fitting the (matching) door front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Fitting the fixing bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Fitting and securing the door front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6. Securing the dishwasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

7. Adjusting the door springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

8. Matching the plinth facing of a kitchen run . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Installing built-under "U" model dishwashers . . . . . . . . . . . . . . . . . . . . . . . . . 21

1. Fitting protective cover plate to worktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

2. Building the dishwasher into its niche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Dishwasher height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Screw feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3. Calculate the decor panel height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4. Matching the plinth facing of a kitchen run . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5. Securing the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6. Adjusting the door springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

7. Adjusting the plinth return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

8. Matching the plinth facing of a kitchen run . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Connection to the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Venting the drainage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

"i"- Integrated dishwashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Built-under "U" model dishwashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Freestanding dishwasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Contents

Freestanding dishwashers

Freestanding dishwashers do not

require any special installation fixings in

the kitchen, (except for plumbing and

electrical connection points. See

relevant sections at the end of this

booklet).

Ensure that the drain hose, inlet hose

and the electric cable are laid to reach

the connection point without any kinks.

^The dishwasher must be level and

stable when installed.

^Any unevenness in the floor level can

be compensated for by adjusting the

four screw feet.

Depending on model

the adjustment range is:

– G 601 - G 632 2 cm

(85-87 cm total height)

– G 646 - G 698, G 975 4 cm

(85-89 cm total height)

Installing a freestanding dishwasher

Integrated ("i") dishwashers

"i" dishwashers are specially designed

for building under a continuous

worktop.

–The control panel with its

accessories is included with the "i"

dishwasher in a separate package

for on-site fixing.

–The front of the dishwasher is

designed to take a front panel. It can

be fitted with a base unit door front to

match the rest of the kitchen.

–The dishwasher does not have a

plinth facing. The plinth area of the

dishwasher needs to be covered

either with a plinth facing to match

the kitchen furniture or with one

which can be ordered as a special

accessory. The separate plinth

facing can be height adjusted to suit

the kitchen. The plinth return is freely

adjustable.

Instructions for installing the

dishwasher are described in the

following sections.

An "i" model dishwasher can be

converted into a built-under "U"

dishwasher.

–A decor set GDU must be used.

–A plinth facing to cover the plinth

area is supplied with the decor set.

The plinth facing can be adjusted to

match the height of adjacent plinths.

The plinth return is freely adjustable.

The decor set is supplied with a

separate installation booklet.

,To ensure stability, "i" and "U" mo-

del dishwashers must only be

installed under a continuous worktop

which must be securely screwed to

neighbouring units.

,The dishwasher must not be

installed under a hob. The high

radiant temperatures which are

sometimes generated by a hob

could damage the dishwasher.

,On dishwashers with a drying

fan, moist air is expelled through the

vent outlet in the front of the machine

at the end of a programme. It

continues to be expelled for a

certain length of time or until the

door is opened.

To prevent damaging surrounding

fittings (e. g. worktops with wood

edging) the fan running time can be

increased by 14 minutes (see

"Additional functions" in the

Operating Instruction manual for the

machine).

Installing integrated "i" Dishwashers

Building in dimensions

Dishwasher models G 601 - G 632

Dishwasher models G 636 - G 698,

G 975

1) Niche height 870 mm

2) Niche height 820 mm

Adjustment range approx. 5 cm

(82 -87 cm total height).

Extended machine feet are available at

extra cost, (special accessory) where a

machine height of 87 to 92 cm is

required.

Dishwasher models G 801 - G 832

Dishwasher models G 836 - G 898

1) Niche height 890 mm

2) Niche height 840 mm

Adjustment range approx. 5 cm

(84 - 89 cm total height).

Extended machine feet are available at

extra cost, (special accessory) where a

machine height of 89 to 94 cm is

required.

Installing integrated "i" Dishwashers

1.Fitting protective cover plate

to worktop

The underside of the worktop is

protected against steam rising from the

machine by a special cover plate.

,If two different materials meet up

at the front edge of the worktop, then

the join must be concealed by the

cover plate.

^Remove the protective backing from

the cover plate.

^Squeeze sealant from the tube

supplied all the way along the hollow

moulding in the cover plate.

^Align the cover plate to the front

edge of the worktop in the middle of

the niche.

^Use the tacks supplied to nail the

cover plate to the underside of the

worktop.

Worktops with wood or laminate

edging:

^Nail the tacks through the holes

further back from the edge.

^Use soapy water to wipe off any

excess sealant.

Installing integrated "i" Dishwashers

2. Fitting the facia panel

The dishwasher must not be used until the control panel has been correctly

fitted.

Dishwashers with selector dial

(G 601 - G 624, G 638 - G 686, G 801 - G 824, G 838 - G 884, G 975)

^Attach cap ato push button switch.

^Push the ventillation grille b

(depending on model) into position

so that the slats on the grille are

facing downwards.

^Place the facia panel cin position

and use the six screws dto screw in

place through from the inside of the

door.

^Attach selector e.

Installing integrated "i" Dishwashers

Dishwashers with programme selector buttons

(G 632, G 692 - G 696, G 832, G 892 - G 896)

^Attach cap ato push button switch.

^Push the ventillation grille binto

position so that the slats on the grille

are facing downwards.

^Place the facia panel cin position and

use the six screws dto screw in place

through from the inside of the door.

^Insert programme selector buttons e

and function buttons f(the number of

buttons will depend on model).

Dishwashers with programme buttons (G 698, G 898)

^Attach cap ato push button switch.

^Push the ventillation grille binto

position so that the slats on the grille

are facing downwards.

^Place the facia panel cin position

and use the six screws dto screw in

place through from the inside of the

door.

Installing integrated "i" Dishwashers

3.Building the dishwasher

into a niche

Connection to water and drainage

should be sited beside and not behind

the dishwasher for accessibility.

Connections are usually made in the

area under the sink. Many kitchen unit

manufacturers provide a cut-out in the

base of the sink base unit for the hoses

to be fed through.

If the base unit has no opening and if

there is not an opening through the

plinth area for connections, one must

be cut.

Dimensions: 60 x 110 mm.

,There must be no electrical

sockets behind the dishwasher.

Danger of overheating and fire risk if

the dishwasher were to be pushed

up against a plug.

Dishwasher height

^Adjust the height manually before

installing the dishwasher.

Leave a space of approx. 5 mm

below the worktop to allow the

dishwasher to be pushed back easily

into the recess. Make sure that the

dishwasher stands level.

It is easier to adjust the screw feet if the

weight of the dishwasher is not bearing

down on them.

If possible tip the machine slightly.

Slides

You will find the slides in the upper

basket of the dishwasher.

They make installation of the

dishwasher easier and protect the floor

from possible damage when moving

the appliance into and out of the

recess. They are also used for

adjusting the height of the rear screw

feet.

^Fit the slides - with the ratchet at the

rear - under the screw feet.

Installing integrated "i" Dishwashers

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miele Spülmaschine Handbücher

Miele

Miele Built-under dishwashers Bedienungsanleitung

Miele

Miele G 611 Plus Bedienungsanleitung

Miele

Miele G 7856 Bedienungsanleitung

Miele

Miele Dishwasher Bedienungsanleitung

Miele

Miele G 349 Plus Bedienungsanleitung

Miele

Miele G 653-2 Plus Bedienungsanleitung

Miele

Miele HG07-W Bedienungsanleitung

Miele

Miele G 811 Bedienungsanleitung

Miele

Miele 11 872 630 / 01 Bedienungsanleitung

Miele

Miele G 1 Series Bedienungsanleitung

Miele

Miele A 207 Bedienungsanleitung

Miele

Miele G 6980 Bedienungsanleitung

Miele

Miele ProfiLine PG 8083 Bedienungsanleitung

Miele

Miele Inspira G2141 Bedienungsanleitung

Miele

Miele G 818 Bedienungsanleitung

Miele

Miele G 7919 Bedienungsanleitung

Miele

Miele Classic G 4205 Handbuch

Miele

Miele G 2430 Bedienungsanleitung

Miele

Miele W2209I BUILDING IN DIAGRAM Bedienungsanleitung

Miele

Miele G 1172 Vi Bedienungsanleitung

Miele

Miele G 7285 SCVi XXL Montageanleitung

Miele

Miele G 1162 SCVi Bedienungsanleitung

Miele

Miele TX2349 Bedienungsanleitung

Miele

Miele Dishwasher Wartungshandbuch

Beliebte Spülmaschine Handbücher anderer Marken

Electrolux

Electrolux ESI5211LOX Bedienungsanleitung

KitchenAid

KitchenAid KUDB230B Bedienungsanleitung

Brandt

Brandt BDJ424DB Bedienungsanleitung

Asko

Asko DSD767UXXL.AU Bedienungsanleitung

Beko

Beko DFN26210W Bedienungsanleitung

NEFF

NEFF S153ITX00E Technisches Datenblatt

Midea

Midea SV 4.45 wi Bedienungsanleitung

LG LDF7932 Bedienungsanleitung

Gorenje

Gorenje GV63214 Bedienungsanleitung

Hotpoint

Hotpoint HDA1100ZWH Service-Handbuch

Blomberg

Blomberg LDFN2240W Bedienungsanleitung

AEG

AEG FFB83836PM Bedienungsanleitung

Cylinda

Cylinda DM3220RFD Bedienungsanleitung

Atag

Atag DW8214MB Bedienungsanleitung

GE GLD8000 Series Bedienungsanleitung

Siemens

Siemens SN23HI02KE Technisches Datenblatt

Omega

Omega ODW717X Bedienungsanleitung

BORETTI

BORETTI BVW-683 Bedienungsanleitung