Miele F 1801 SF Bedienungsanleitung

Operating and Installation

Instructions

Freezer

F 1801 SF

F 1811 SF

F 1901 SF

F 1911 SF

To prevent accidents

and machine damage

read these instructions

before

installation or use. M.-Nr. 07 360 800

en - US, CA

Installation instructions

To prevent accidents

and machine damage

read these instructions

before

installation or use.

Disposal of packing materials

The cardboard box and packing

materials are biodegradable and

recyclable. Please recycle.

Ensure that any plastic wrappings,

bags, etc., are disposed of safely and

kept out of the reach of babies and

young children. Danger of suffocation!

Disposal of an old appliance

Old appliances contain materials that

can be recycled. Please contact your

local recycling center about the

possibility of recycling these materials.

Before discarding an old appliance,

disconnect it from the gas and

electrical supply and cut off the power

cord to prevent it from becoming a

hazard.

Caring for the environment

Have the appliance installed by a

qualified technician, according to

the enclosed installation instructions.

The manufacturer is not liable for

damage to property due to an

incorrect installation or water

connection.

WARNING

This appliance is top-heavy and

must be secured to prevent it from

tipping forward.

Keep the door closed until the

appliance is completely installed

and secured as per the installation

instructions.

Empty weight of your machine:

F 18X1 SF .........421lbs(191 kg)

F 19X1 SF .........459lbs(208 kg)

Installation site

The appliance should be installed in a

dry, well-ventilated room.

Do not install the appliance:

- outdoors

- in an environment with dripping

water

- in rooms that are at risk of frost.

The installation location should not be

exposed to direct sunlight, nor near a

heat source, such as an oven,

radiator, etc.

The ambient temperature should not

drop below 55°F (13°C) or rise above

110°F (43°C), otherwise malfunctions

may occur.

If installation next to a heat source is

unavoidable, use a suitable insulating

plate or observe the following minimum

distances from the heat source:

–1

1/4" (3 cm) from an electric cooktop

or oven.

–12" (30 cm) from a gas cooktop or

oven.

Installation

Base

A fully loaded appliance is very heavy.

The load-bearing capacity of your floor

must meet the following requirements:

F 18X1 SF .........930lbs(422 kg)

F 19X1 SF ........1,110 lbs (505 kg)

To ensure that the appliance is installed

securely and functions properly, the

base must be flat, level and made of a

hard, rigid material.

If in doubt, contact Miele.

Furniture/fixtures

The new appliance will be mounted

securely to adjacent and overhead

furniture/fixtures.

For this reason, it is essential that all

attachable furniture/fixtures be

connected securely to the floor or wall

by a suitable means.

Ventilation

The air intake and outlet must not be

blocked or covered in any way. They

also need to be dusted/cleaned on a

regular basis.

Installation niche

To ensure safe, trouble-free installation

and the best possible cosmetic result,

check to be sure that the installation

space complies with the installation

dimensions. See "Niche dimensions".

The side walls of the installation cavity

must be plumb.

The minimum thickness of the side

walls and the top wall must be 5/8"

(16 mm).

The minimum thickness of the toe-kick

panel must be ½" (13 mm). A thickness

of 3/4" (19 mm) is recommended.

Installation

Installation options

There are many different installation

options. You are limited only by the

design of the kitchen.

The door hinge cannot be

exchanged.

Single column

The appliance can be installed at any

preferred location in the kitchen.

However, be sure the door will open

and close properly in the chosen

location.

Side-by-side

This appliance can be installed

"side-by-side" with another

fridge/freezer using a "Merging Kit".

The "Merging Kit" can be obtained from

Miele.

Contact Miele or your dealer for

specific information about which

combinations will work with your

appliance.

. . . without partition

If the appliances are installed directly

next to each other (without a partition),

they will need to be attached together.

A heating mat must also be installed.

This will help avoid condensation and

prevent damage.

For instructions on how to attach the

appliances and install the heating mat,

please refer to the instructions included

in the "Merging Kit" available from

Miele.

Installation

. . . with partition

The minimum thickness of the partition

is 5/8" (16 mm).

If there is a partition between the

adjacent appliances, then each

appliance is to be individually installed

within its own niche.

A heating mat must only be installed if

the partition wall is less than 6"

(160 mm) wide:

For instructions on how to install the

heating mat please refer to the

instructions included in the "Merging

Kit".

The "Merging Kit" can be obtained

from Miele.

Side panels

If one side of the appliance is visible, a

side panel must be used.

The side panel must be firmly secured

to the wall, the floor and the overhead

furniture/fixtures before the appliance is

placed in the cavity.

The dimensions of the side panel are

taken from the opposite wall of the

installation space. During installation,

ensure that the cavity is square and the

measurements are correct.

Installation

Niche dimensions

F 18X1 SF 30 1/2" (774.6 mm) 30" (762 mm)

F 19X1 SF 36 1/2" (927 mm) 36" (915 mm)

Dimensions

1. Power supply

2. Water connection

F 18X1 SF 15" (381 mm)

F 19X1 SF 18" (458 mm)

Door dimensions (open 115°)

F 18X1 SF 32 5/8" (829 mm) 14 5/16" (363 mm)

F 19X1 SF 38 11/16" (982 mm) 16 7/8" (428 mm)

Dimensions

Before you begin

Read these instructions completely

and carefully.

Have the appliance installed by a

qualified technician, according to

the enclosed installation instructions.

To reduce the risk of injury or

damage to the product, two people

should be used for installation.

These installation instructions are

intended for use by qualified installers.

In addition to these instructions, the

appliance must be installed in

accordance with all local codes. In the

absence of a local code, the following

should be used:

– In the USA, the National Electric

Code, ANSI/NFPA 70 - latest

edition/State and Municipal codes

and/or local codes.

–In Canada, the Canadian Electric

code C22.1 - latest edition/Provincial

and Municipal codes and/or local

codes.

Tools needed for installation

–Cutter with adjustable blade

–Cordless screwdriver T 20

–Torx screwdriver T 20

–Hammer drill for drilling holes in wall

or floor

–Wood drills in different sizes

–Hammer

–Open-ended wrench ½" (SW 13 mm)

–Box-end wrench

–5/16" (8 mm) hex nut driver

– Adhesive tape

– Multi-grip pliers

– Level

– Metal tape measure

– Square

Other

–Stepladder

–Dolly, hand truck

–Wooden beam

(cross section min. 29 ½" x 39 3/8"

[75 cm x 100 cm] as an alternative tilt

protection, length depends on the

width of the installation cavity)

–Wood screws in different sizes

Optional Tool

–"Merging Kit" for side-by-side

installation.

Installing the appliance

Andere Handbücher für F 1801 SF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miele Gefrierschrank Handbücher

Miele

Miele KFN 37692 iDE Bedienungsanleitung

Miele

Miele FN 35402 i Bedienungsanleitung

Miele

Miele F 7102 S Technisches Datenblatt

Miele

Miele FN 11827 S Technisches Datenblatt

Miele

Miele FNS 28463 E ed/cs Bedienungsanleitung

Miele

Miele F9052i Bedienungsanleitung

Miele

Miele F 9212 I Bedienungsanleitung

Miele

Miele F 9122 Ui-1 Technisches Datenblatt

Miele

Miele FNS 4782 E edt/cs Bedienungsanleitung

Miele

Miele FN 12020 S Technisches Datenblatt

Miele

Miele FN 12827 S ed Technisches Datenblatt

Miele

Miele FN 35402 i Bedienungsanleitung

Miele

Miele F9122Ui-2 Bedienungsanleitung

Miele

Miele KFN 7795 D Bedienungsanleitung

Miele

Miele GT 263 ES Bedienungsanleitung

Miele

Miele KFNS 37432 iD Bedienungsanleitung

Miele

Miele F 1471 Vi Technisches Datenblatt

Miele

Miele KFN 14943 SDE Bedienungsanleitung

Miele

Miele GT 56 S Bedienungsanleitung

Miele

Miele KWFN 8706 SE ED-1 Bedienungsanleitung

Miele

Miele F 1365 S Technisches Datenblatt

Miele

Miele KFNS 7734 D Bedienungsanleitung

Miele

Miele KFN 37432 iD Bedienungsanleitung

Miele

Miele FN 9752 i Technisches Datenblatt

Beliebte Gefrierschrank Handbücher anderer Marken

Siemens

Siemens GU..D SERIES Bedienungsanleitung

Omcan

Omcan FR-CN-0155 Bedienungsanleitung

Beko

Beko FNE290E24W Bedienungsanleitung

Electrolux

Electrolux ARCTIS G 8 60 50-6I Bedienungsanleitung

Electrolux

Electrolux EUF2042AOX Bedienungsanleitung

Dometic

Dometic CoolFreeze CFX95DZ Bedienungsanleitung

Electrolux

Electrolux EUF7000W1 Bedienungsanleitung

Polar Electro

Polar Electro CT330 Bedienungsanleitung

MPM

MPM MPM-145-SK Series Bedienungsanleitung

SAF

SAF PRESTOTIG 200AC/DC Kurzanleitung

Zanussi

Zanussi ZFT11407WA Bedienungsanleitung

AEG

AEG A63190GT Bedienungsanleitung

AEG

AEG A81000TNW0 Bedienungsanleitung

Matsui

Matsui MUC50S15E Bedienungsanleitung

NEFF

NEFF G4344X8 Bedienungsanleitung

Frigidaire

Frigidaire FV 1246 H Bedienungsanleitung

Frigidaire

Frigidaire FFC13K1AW Bedienungsanleitung

Electrolux

Electrolux EU 2400C Bedienungsanleitung