Miele W 5000 WPS Supertronic Bedienungsanleitung

Quick Start Guide

for the Supertronic

washing machine

These short instructions are not a substitute

for the Operating instructions supplied with the appliance.

Please read the Operating instructions supplied with

your washing machine before using it for the first time and

take note of the Warning and Safety instructions as well

as the full descriptions on how to use your machine. M.-Nr. 09 579 330

en - AU, NZ

aMiele{home

The appliance is compatible with the

Miele|home system (available in

selected countries).

b:sensor (Information)

If the sensor is lit up, information is

available for the menu displayed.

cPC interface

Used by service technicians to run

diagnostic checks on your

appliance, or to update

programming data in the future.

dSelector sensors

If a selector sensor is illuminated, it is

active.

eDisplay

For displaying:

–The selected functions.

–The programme sequence.

–Info texts.

–Fault messages.

fUsensor (Clear)

–Returns to the previous menu

screen.

– Returns to the main menu if pressed

twice.

– Discards previously set values.

– Cancels a programme.

gStart sensor

The selected programme is started

via the sensor illuminated in green.

hKbutton

For switching the washing machine

on and off.

To save energy, the machine will

switch off automatically after

programme end/Anti-crease or if no

other function is selected after

switching on.

i/button

For opening the door.

Control panel

1. Switch the washing machine on by pressing K.

The drum lighting will switch on and the main menu will

appear in the display.

Main menu 10:21 [

[

$Favourite programmes

#Cottons

!Minimum iron m

^Select the programme you want.

2. Select a temperature / spin speed

Default values are set for the temperature and spin speed of

each programme. These default values can be modified to a

certain extent, depending on the programme selected.

Cottons 1-8 kg 1:49 h. 10:21 [

[

$Temp. r+$

#Spin speed 1600 rpm -#

!Automatic detergent dispensing OK !

^Select the relevant option.

Cottons 1-8 kg 1:49 h. 10:21 [

[

$Temp. 50 °C (Cold - 90) +$

#Spin speed 1600 rpm -#

!Automatic detergent dispensing OK !

^You can change the default value by pressing +and -. The

range of values are shown in brackets.

^Confirm the set value with OK.

Brief instructions

3. Selecting Extras

^Select Extras in the main menu. See "Extras" for further

information.

Extras 10:21 [

[

$8Soak

#9Extra quiet p

!8Short OK !

^Select the Extra you want.

You are able to select several Extras. A tick 9will indicate

which Extra has been selected.

4. Stains

You can select different stain options to achieve the optimum

washing result. Extras will be automatically activated with the

wash cycle, depending on the stains selected. With some

stain options you will receive additional tips on how to pre-

treat the stains.

^Select the Stains option.

Select stains 10:21 [

[

$9Blood

#8Cola p

!8Egg OK !

^Select the stains to be removed.

You can select up to three stains per programme.

If "Short" was selected previously, it will be deactivated

automatically.

5. Load/Detergent

^Press the /button to open the drum door.

The Load / Detergent sub-menu will appear in the display.

The washing machine has a sensor which measures the

amount of laundry placed in the drum. The display shows

the percentage of the maximum load which has been

placed in the drum. The maximum load will depend on the

programme selected.

In addition to the load size precentage, the amount of

detergent required is also shown as a % figure.

The load is shown in the display in 25% steps. Loads of less

than 25% or an empty drum are shown as <25%.Ifthe

amount of laundry exceeds the maximum load, Drum

overloaded will appear in the display.

^Unfold the laundry and load loosely in the drum. Mixing

both large and small items gives better wash results and

also helps distribute the load evenly during spinning.

The size of the load will appear in the display.

Load / Detergent 10:21

[

Load QP PQ GH GHM 50%

Detergent PPPPPPGGGGM 60%

OK !

The most efficient use of energy and water is achieved when

a full load is washed. However, do not overload as this

causes creases and reduces cleaning efficiency.

Make sure that no garments are caught between the drum

door and seal.

^Shut the door with a gentle swing.

6. Adding detergent

A. Automatic detergent dispensing

The detergent quantities and types of detergent need to be

programmed into the electronics of the washing machine.

For a thorough explanation, please refer to the Operating

instructions booklet.

^Select the Automatic detergent dispensing option.

Automatic detergent dispensing 11:21

[

Normal soiling

#Lower QP PQ GH GHM Higher #

OK !

^Select the level of soiling and confirm with OK.

The machine suggests the best detergent container.

Select container 10:21

[

$Powder: Universal detergent selected (

#Liquid: Colour detergent selected

OK !

^Confirm the suggested container with OK or select the

other container and confirm with OK.

Using stain remover

When automatic detergent dispensing is selected, the

compartments iand jin the detergent dispenser drawer

are not rinsed out with water.

How to add stain remover:

1. Fill a dispensing aid (detergent ball) with stain remover

and place this in the drum.

2. Switch off automatic detergent dispensing. Dispense the

detergent and the stain remover via the detergent

dispenser drawer.

Using fabric conditioner or liquid starch

Fabric conditioner and liquid starch can

be added to the §compartment in the

detergent dispenser drawer. These will

automatically be dispensed in the last

rinse.

B. Detergent dispenser drawer

Please note:

Use the information in the display for

the correct detergent dispensing.

The percentage shown relates to the

amount of detergent recommended by

the manufacturer on the packaging.

50% = Add half the amount

recommended

60% = Add slightly more than half

the amount recommended

75% = Add three quarters of

the amount recommended

100% = the full amount of detergent

recommended

You also need to take the level of

soiling and water hardness into

account.

It is important to dispense the correct

amount because too little detergent

results in:

–Laundry not getting properly clean

and with time it may become grey

and hard to the touch.

–Greasy particles clinging to the

laundry.

–Limescale deposits on the heater

elements.

Too much detergent results in:

–Excessive foam which causes a low

level of agitation and poor wash,

rinse and spin results.

–High water consumption (an

additional rinse cycle will

automatically switch in).

–A burden to the environment.

^Pull out the detergent drawer and

add detergent to the compartments

as follows:

Detergent for the pre-wash

(divide the total recommended

amount as follows: add 1/3to

compartment iand 2/3to

compartment j)

Detergent for the main wash,

including Soak if selected

Fabric conditioner or liquid starch

^Close the detergent drawer.

7. Starting a programme

^Touch the green Start sensor.

The estimated time in the display may

change within the first six minutes of the

programme. The washing machine

measures how much water is being

absorbed by the laundry. This can

extend or shorten the programme

duration.

8. Remove the laundry when

the programme has finished.

After the programme has finished, the

following will appear alternately in the

display:

Anti-crease

and

Programme finished. Unload the drum

before switching off

,After using the steam function,

there is a danger of burning due to

escaping steam and the high

temperatures on the surface of the

drum and door glass. Step back and

wait until the steam has dissipated.

^Press the /button to open the drum

door.

^Remove the laundry.

The machine will switch off

automatically 15 minutes after the

end of the Anti-crease phase. Press

the Kbutton to switch the machine

back on.

Check that all items have been

removed from the drum. Items left in

the drum could shrink or discolour

other items in the next wash, or

become discoloured themselves.

^Check the folds in the door seal for

any small articles, e.g. buttons, which

might be lodged there.

Important!

Always remove the laundry before

switching the machine off. This is

important to ensure that the load size

indicator works correctly.

^Switch the machine off with the K

button.

To avoid the build-up of mildew, it is

recommended that the door is left ajar

when the machine is not in use.

1313/00

Inhaltsverzeichnis

Andere Miele Waschmaschine Handbücher

Miele

Miele PG 8581 Bedienungsanleitung

Miele

Miele PWM 300 SmartBiz Bedienungsanleitung

Miele

Miele WCE320 Bedienungsanleitung

Miele

Miele WKH 130 WPS Bedienungsanleitung

Miele

Miele PW 6207 Bedienungsanleitung

Miele

Miele WSG 663 Series Bedienungsanleitung

Miele

Miele PG 8527 Bedienungsanleitung

Miele

Miele WDB 030 ECO Bedienungsanleitung

Miele

Miele APCL 028 Bedienungsanleitung

Miele

Miele T 6251 Bedienungsanleitung

Miele

Miele W 820 Bedienungsanleitung

Miele

Miele G 7825 Bedienungsanleitung

Miele

Miele PWM 916 SD Bedienungsanleitung

Miele

Miele PG 8536 Bedienungsanleitung

Miele

Miele WWD 120 Bedienungsanleitung

Miele

Miele W 5740 Bedienungsanleitung

Miele

Miele W 5902 Premium Plus Bedienungsanleitung

Miele

Miele PW 6080 VARIO Bedienungsanleitung

Miele

Miele PWM 507 Hygiene Bedienungsanleitung

Miele

Miele PWM 909 SOM Bedienungsanleitung

Miele

Miele TOUCHTRONIC W 4802 Gebrauchsanweisung

Miele

Miele PW 6241 Bedienungsanleitung

Miele

Miele 12 470 130 / 00 Bedienungsanleitung

Miele

Miele W 3722 Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung

Beko

Beko WKB 51231 PTMA Bedienungsanleitung

Samsung

Samsung WF16J9800K Series Bedienungsanleitung