1. Press the 'MEM' button to recall
up to 10 measures stored in memorY.
iffiF] Memory Button
i]ili/ltl una. Button
2. The I symbol or no symbol will
appear with each measurement stored in
memory to indicate whether a person or
object temperature was taken.
3.Thehappy face g orsadface@
symbol will appear 5 seconds after
viewing the measurement stored in
memory.
riry-
Cleaning & Storage
NOTE:
After 10 measurements have been
stored in the memory, the oldest reading
will be automatically deleted.
1. Press the Power button to turn the
thermometer on.
2. To clear the memory, simply hold the
'MEM' button down until the thermometer
beeps and two horizontal lines appear.
. Only use a soft dry cloth to ilean the
thermometer.
. Make sure that liquid does not enter the
interior of the thermometer.
'Never use abrasive cleaning agents,
thinners or gasoline for cleaning.
. Do not immerse into water or other
cleaning liquids.
. Remove the battery if the thermometer
will not be used for an extended period of
time.
. Store in a sun-free and dust-free dry
area at a temperature between
-25'C - 55C ( -13'F - 131T ) with relative
humidity not exceeding 95%.
. Protect the thermometer from severe
impact or shock. KeeP stored in the
protective storage bag.
fir
To ensure accurate measurements,
clean the lens before and after each use.
Fingerprints and dirt can cause inaccurate
readings.
. Use an alcohol swab or a soft cotton
swab moistened with alcohol to clean
the thermometer lens.
. Do not use paper towels, but the
fibers may scratch the lens.
. Do not use water to clean the lens or
thermometer.
E8t I
]Efi I
@rl Hfi ..$S
ee
