2
9. Always switch o the product and disconnect from supply if it is
left unattended and before assembling, disassembling, cleaning or
approaching parts that move in use.
10. Do not immerse the product or allow the supply cord and plug come
into contact with water or other liquid.
11. The use of accessory attachments, including canning jars, not
recommended by the appliance manufacturer may cause a risk of re,
electric shock or injuries to persons.
12. Do not let cord hang over edge of table or counter or touch hot surfaces.
13. Do not place on or near a hot gas or electric burner or in a heated oven.
14. Extreme caution must be used when moving an appliance containing
hot oil or other hot liquids.
15. Where applicable, always attach plug to appliance and check that the
control is OFF before plugging cord into wall outlet. To disconnect, turn
the control to OFF, then remove plug from wall outlet.
16. Do not use appliance for other than intended use.
17. Avoid contacting moving parts.
18. Keep hands and utensils out of container while blending to reduce the
risk of severe injury to persons or damage to the power blender. A scraper
may be used but must be used only when the blender is not running (does
not apply to an acceptable scraper integral with the appliance).
19. Do not use the product if the blade is curve or damage.
20. Never operate the product without any liquid in the jar or empty.
21. Never try to defeat the interlock switch mechanism, make sure the
accessory is completely installed before operation.
22. Do not overll the jar.
23. Always operate blender with cover in place.
24. CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit that is
regularly switched on and o by the utility. If the thermal cut-out operate
during using, please switch o the product and unplug the plug from the
supply main, let the product cold down before use.
