MILL SG2000MEC Benutzerhandbuch

SLO

Assembly and instruction manual

Series:

Instant Convection heater

This product is only suitable for well insulated spaces or

occasional use.

Dieses Produkt ist nur für gut isolierte Räume oder

gelegentlichen Gebrauch geeignet.

Ta izdelek je primeren samo za dobro izolirane prostore

ali občasno uporabo.

See toode sobib kasutamiseks ainult hästi soojustatud

ruumides või lühiajaliseks kütmiseks.

Questo prodotto è adatto solo per spazi ben isolati o uso

occasionale.

Ce produit convient uniquement pour les espaces bien

isolés ou pour une utilisation occasionnelle.

Šis produkts ir piemērots tikai labi izolētām telpām vai

nepatstāvigai lietošanai.

Tento výrobek je vhodný pouze pro dobře izolované prostory

nebo příležitostné použití.

Ovaj proizvod je namijenjen za prostorije sa dobrom

izolacijom ili za povremenu upotrebu.

Dit product is alleen geschikt voor goed geïsoleerde

ruimtes of incidenteel gebruik.

Tento výrobok je vhodný iba pre dobre izolované priestory

alebo príležitostné použitie.

Šis produkts ir piemērots tikai labi izolētām telpām vai

nepatstāvigai lietošanai.

Ten produkt jest przeznaczony tylko do dobrze izolowanych

pomieszczeń lub okazjonalnych zastosowań.

Please read the instructions carefully before use.

Take good care of this manual for later use.

millnorway.com

Scandinavian

home comfort

Mill is a Norwegian brand that develops heating and indoor

air quality products tailored for your modern home. Inspired

by Scandinavian nature, our products are designed to sustain

the toughest of climates to ensure safe, efﬁcient and com-

fortable temperatures, as well as good air quality.

Mill products are praised for their minimalistic and elegant

features as they blend in naturally with any modern interior.

Our advanced and user-friendly technology will support a

relaxing and healthy home space with reliable temperatures

and air quality. Mill’s vision is to develop products that create

an enjoyable and harmonic household atmosphere, enhanc-

ing both comfort and style; the ultimate Scandinavian home

comfort.

We hope you enjoy your Mill product.

fb.com/millnorway

@millnorway

millnorway.com

Content

24

Important safety information

Speciﬁcations

Before ﬁrst use

First use

Description of heater

Parts

Assembly

Instructions mechanical thermostat

Usage mechanical thermostat

Instructions electronic thermostat

Usage electronic thermostat

Temperature calibration

Resetting the heater

Maintenance

Warranty

Waste disposal

Please read the instructions carefully before use. Take

good care of this manual for later use.

STORE THIS INSTRUCTION MANUAL FOR

FUTURE USE!

NEVER TOUCH YOUR HEATER OR ITS CASING

WITH WET HANDS!

IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

2millnorway.com

Important safety information

You must obey common safety guidelines when using

electrical products, especially in the presence of chil-

dren.

WARNING! To avoid electric shock or damage due

to the heat, always make sure the plug is pulled out

before the heater is moved or cleaned.

READ THE INSTRUCTIONS CAREFULLY

• The product is intended for home use only.

• Make sure the heater is connected to the house’s regular

mains as indicated on the heater.

• New heaters will produce a speciﬁc odor when used the

ﬁrst time. This will stop after a short time and is completely

harmless.

• Check for any pieces of packing foam or cardboard that

may have fallen into the heating elements of the heater.

These pieces must be removed to avoid unpleasant odors.

• Prevent the heater from overheating — do not cover.

• Always turn off the heater and unplug it when not used for

a long period of time.

• Pay special attention if the heater is used in rooms where

children, the handicapped or elderly reside.

• The heater should not be set up directly beneath an electri-

cal socket outlet.

• The cord must not be laid under any kind of carpet. Make

sure the cord is laid in such a way that nobody can trip

on it.

• The heater must not be used if either the cord or plug

is damaged. The heater must not be used if it has been

dropped on the ﬂoor or is damaged in any other way caus-

ing it to malfunction.

• The cord must be repaired by the manufacturer or by an ex-

pert if it has been damaged, to avoid dangerous situations.

• Avoid using extension cords, which may overheat and

could possibly start a ﬁre.

• Never cover the air vents on the heater. Avoid potential ﬁre

hazards by making sure the air intakes are not blocked or

covered. The heater should be used in rooms with normal

ﬂat ﬂoors.

• The heater should not be installed in close proximity to

ﬂammable materials of any kind because there can always

be a risk of ﬁre.

• The heater must never be used in rooms where gasoline,

paint or other ﬂammable liquids are stored, such as in a

garage.

• Never touch an electric heater with wet hands. The heater

should be installed so a person showering or taking a bath

cannot come into direct contact with it.

• Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children

and vulnerable people are present.

• The heater must be switched off, the plug removed and the

heater must cool down before it is moved.

• Avoid overloading the mains (the circuit) where the heater

is connected. The heater may overload the electrical circuit

if other electrical devices are plugged into the same socket

outlet.

4millnorway.com

• Do not use this heater in small rooms when they are occu-

pied by persons not capable to leaving the room on their

own, unless constant supervision is provided.

• The product cannot be used by children under 8 years of

age and persons with reduced physical or mental abilities

or lack of experience and knowledge unless they have

been given supervision or instruction in the safe use of the

product and understand the hazards involved.

• Children should not play with the product. Cleaning and

maintenance should not be done by unsupervised children.

• Children under the age of 3 should be kept away from th

product, unless they are under constant supervision.

• Children aged 3 to 8 years are only permitted to turn th

product ON/OFF, assuming the heater is mounted accord-

ing to the assembly instructions and the children have

received.

• Do not use this heater in the immediate surroundings of a

bath, a shower or a swimming pool.

WARNING! The heater must not be used if the glass panels

are damaged (applies to SG2000GLASS only).

ATTENTION! This heater is only meant to be used as a

supplementary heating source, and must not be used

without supervision

Speciﬁcation

Model Thermostat Color Amperage Power (W) Fan

SG2000MEC Mechanical White 220240V~, 5060Hz 18002000 No

SG2000LED Electronic White 220240V~, 5060Hz 18002000 Yes

SG2000GLASS Electronic White 220240V~, 5060Hz 18002000 Yes

SG2000LED BLACK Electronic Black 220240V~, 5060Hz 18002000 Yes

CO2200MECMAX Mechanical White 220240V~, 5060Hz 19002200 No

CO2200LEDMAX Electronic White 220240V~, 5060Hz 19002200 No

Before ﬁrst use

After unpacking the heater, check to make sure the product was not damaged during

transport. Contact the retailer or importer if you discover any visible damages to the

product.

Keep the outer packaging to transport the heater in the future. If you want to dispose the

packaging, make sure it is done properly. Keep plastic bags away from children.

First use

After turning on the heater for the ﬁrst time or after an extended period without use, the

heater can produce a burnt odor for a short time. This is normal.

Please read all the instructions carefully before use. Save the instruction manual for future

use.

Description of heater

Please see table above for which models that have mechanical/electronic thermostats.

See ﬁgure 1 on separate illustration sheet

and

Mechanical thermostat

1. Heat emission

2. Thermostat

3. Output selector

4. Legs (plastic)

und

Elektronisch Thermostat

1. Heat emission

2. LED display

3. Thermostat + output selector

4. Fan (does not apply to CO2200LEDMAX)

5. ON/OFF

6. Legs (aluminium)

Parts

See ﬁgure 2 on separate illustration sheet

Mechanical Thermost

• 4 screws (pre-mounted)

• 2 foot brackets

• 2 rails for the feet

Electronic Thermostat

• 8 screws (pre-mounted)

• 2 foot brackets

• 2 rails for the feet

Assembly

See ﬁgure 3 on separate illustration sheet

Mechanical Thermostat

1. Insert both legs into the brackets so you get a stable foot.

2. Remove the pre-mounted screws from the bottom of the heater and place the heater

gently on its head to mount the feet.

3. Two screws must be fastened on each foot bracket.

4. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

6millnorway.com

Electronic Thermostat

1. Remove the pre-mounted screws on both legs before you insert them into thebrack-

ets, so that you get a stable foot.

2. Attach the legs to the brackets by tightening 2 screws into each bracket.

3. Remove the pre-mounted screws from the bottom of the heater and place the heater

gently on its head to mount the feet.

4. Two screws must be fastened on each foot bracket.

5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

Instructions mechanical thermostat

Please see table on page 4 for which models that have mechanical thermostats

Control Panel

See ﬁgure 4 on separate illustration sheet

1. Thermostat: Adjust the desired heat settin

2. Output selector:

SG2000MEC

0: OFF

|: 750W

||: 1250W

|||: 2000W

WARNING: BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE

INSTRUCTIONS BEFORE USING THE HEATER!

ATTENTION! This heater is only meant to be used as a supplementary heating source, and

must not be used without supervision

Usage mechanical thermostat

1. Set the output selector to the OFF position (0) and the thermostat to minimum. Plug

the heater into a grounded outlet.

2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum

position. When the desired room temperature has been reached, turn the thermostat

slowly down until you hear a click. The thermostat can now remain in this position

until a different room temperature is desired. As soon as the room emperature falls

below this level, the heater will automatically switch on again. When the room has

again reached the desired temperature, the heater will switch off again.

3. If you wish to change the room temperature, repeat the instructions in step 2.

4. The heater has an overheat protection that turns the device off if any parts become

extremely hot.

5. To switch the heater off, turn the output selector to the O position. If the heater will

be left unused for a longer period of time, pull out the plug.

CO2200MECMAX

0: OFF

|: 1000W

||: 1200W

|||: 2200W

Instructions electronic thermostat

Please see table on page 4 for which models that have electronic thermostats.

Control panel

See ﬁgure 5 on separate illustration sheet

1. Thermostat, output selector and timer button (applies to CO2200LEDMAX only):

i. Turn the selector to the left to decrease the temperature, and turn the selector to

the right to increase the temperature.

ii. Push the button to change the desired power level. 3 power levels.

iii. Press and hold the button for 3 seconds to activate the timer function, and

choose number of hours 024 you wish to have the timer function activated

2. Fan ON/OFF (does not apply to CO2200LEDMAX)

3. ON/OFF button

4. Power indicator — Shows whether the heater is using power or not

5. Indicates the output level

6. Indicates whether the fan is activated / timer indicator for CO2200LEDMAX

7. Desired room temperature

8. Standby indicator for CO2200LEDMAX

WARNING: BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE

INSTRUCTIONS BEFORE USING THE HEATER!

ATTENTION! This heater is only meant to be used as a supplementary heating source, and

must not be used without supervision

Usage electronic thermostat

1. Plug the heater into a grounded outlet.

2. Press the ON/OFF button.

3. Choose the desired power |, || or |||, by pressing the output selector. Turn the ther-

mostat to the desired temperature while looking at the display. As soon as the room

temperature drops below this level, the heater will automatically start again. When

the room has reached the desired temperature again, the heater will turn itself off.

4. The thermostat goes from 5 to 35°C.

5. If you want to change the temperature in the room, repeat step 3.

6. Press the fan button to start the fan (does not apply to CO2200LEDMAX). Note that

the fan is only active when the heater is heating up (when the power indicator

is on).Timer function for CO2200LEDMAX: Press and hold the timer button for 3

seconds to activate the timer function, 00 will appear in the display. Turn the timer

button to select how many hours 024 you want the timer function to be activated, 0

means no timer function. Aer selecting the number of hours, press the timer button,

or wait 15 seconds for automatic conﬁrmation. The timer indicator will now light up.

When the timer function is o, the heater goes to standby mode, the display shows

OF and the standby indicator will light up.

8millnorway.com

7. The heater has an overheat protection that turns the device off if any parts become

extremely hot.

8. If the temperature sensor is not functioning as it should,$will be shown on the

display. In such instances, the heater will switch itself off. Please contact your

distributor or importer.

9. To turn off the heater, press the ON/OFF button. Should the heater be left unused

for a longer period of time, pull out the plug.

Temperature calibration

SG2000LED/SG2000LED BLACK/SG2000GLASS

See ﬁgure 6 on separate illustration sheet

It may occur deviation between the temperature registered by the heater and the actual

temperature in the room. This can be caused by several reasons, however, the most

comon is that the heater is placed in a fair distance from where you usually reside. When

you set the temperature to for example 22 degrees, it is only natural that you expect the

same temperature where your sofa is placed for instance. However, the temperature

sensor is placed on the product itself, and therefore a deviation in temperature may occur.

To adjust this, all Mill heaters are equipped with a calibration function, which enables you

to adjust the temperature registered by the heater. N.B! The room must have achieved a

stable temperature before any calibration.

Press and hold @for 5 seconds and use + or – to set the actual temperature observed

in the room. Conﬁrm with @or wait 15 seconds for automatic conﬁrmation.

Resetting the heater

See ﬁgure 7 on separate illustration sheet

Turn off the heater’s main switch. Press and hold @or %while you turn on the

heater’s main switch.

Andere Handbücher für SG2000MEC

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere MILL Heizung Handbücher

MILL

MILL SG2000MEC Benutzerhandbuch

MILL

MILL Invisible Series Benutzerhandbuch

MILL

MILL Steel & Glass Series Benutzerhandbuch

MILL

MILL SG2000MEC Benutzerhandbuch

MILL

MILL CUS1800MECWA Benutzerhandbuch

MILL

MILL PTC Series Benutzerhandbuch

MILL

MILL Oil Premium Series Benutzerhandbuch

MILL

MILL AB-H700MINI Benutzerhandbuch

MILL

MILL NE900WIFI Benutzerhandbuch

MILL

MILL PTC Series Benutzerhandbuch

MILL

MILL Oil Premium Series Benutzerhandbuch

MILL

MILL AB-H700MINI Benutzerhandbuch

MILL

MILL Steel WiFi Series Benutzerhandbuch

MILL

MILL Convection WiFi Series Benutzerhandbuch

MILL

MILL CO1200WIFI3 Benutzerhandbuch

MILL

MILL SG2000LED BLACK Benutzerhandbuch

MILL

MILL Invisible & Glass Series Benutzerhandbuch

MILL

MILL Glass Series Benutzerhandbuch

MILL

MILL Steel & Glass Series Benutzerhandbuch

MILL

MILL SG2000MEC Benutzerhandbuch

MILL

MILL Steel & Glass Series Benutzerhandbuch

MILL

MILL NE600WIFI Benutzerhandbuch

MILL

MILL Oil Series Benutzerhandbuch

MILL

MILL Steel Series Benutzerhandbuch

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung