Milltronics VT-Modem-1 WW Bedienungsanleitung
EXTERNAL MODEM KIT
Instruction Manual October 2002
EXTERNAL MODEM KIT
Siemens Hardware
© Siemens MilltronicsProcessInstruments Inc. 2002
Safety Guidelines
Warning notices must be observed to ensure personal safety as well as that of others, and to
protect the product and the connected equipment. These warning notices are accompanied
by a clarification of the level of caution to be observed.
Qualified Personnel
This device/system may only be set up and operated in conjunction with this manual.
Qualified personnel are only authorized to install and operate this equipment in accordance
with established safety practices and standards.
Warning: This product can only function properly and safely if it is correctly transported,
stored, installed, set up, operated, and maintained.
Note: Always use product in accordance with specifications.
Copyright Siemens Milltronics Process
Instruments Inc.2002.AllRights ReservedDisclaimer of Liability
This document is available in bound version and in
electronic version. We encourage users to
purchase authorized bound manuals, or to view
electronic versions as designed and authored by
Siemens Milltronics Process Instruments Inc.
Siemens Milltronics Process Instruments Inc. will
not be responsible for the contents of partial or
whole reproductions of either bound or electronic
versions.
While we have verified the contents of
this manual for agreement with the
instrumentation described, variations
remain possible. Thus we cannot
guarantee full agreement. The
contents of this manual are regularly
reviewed and corrections are included
in subsequent editions. We welcome
all suggestions for improvement.
Technical data subject to change.
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments Inc.
Contact SMPI Technical Publications at the following address:
Technical Publications
Siemens Milltronics Process Instruments Inc.
1954 Technology Drive, P.O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs@siemens-milltronics.com
For the libraryof SMPI instruction manuals, visitour Web site: www.siemens-milltronics.com
7ML19981DP02 External Modem Kit – INSTRUCTION MANUAL Page i
Table of Contents
Specifications...................................................................................................................... 1
RS-232 Modem Kit................................................................................................................................... 1
RS-485 Modem Kit................................................................................................................................... 1
Warranty............................................................................................................................... 1
The External Modem Kit.................................................................................................... 2
Components.............................................................................................................................................. 2
Dimensions.......................................................................................................................... 3
RS-232 Modem ...............................................................................................................................3
RS-485 Modem ...............................................................................................................................3
Power Supply .................................................................................................................................4
Assembly Instructions....................................................................................................... 5
Configuring External Modem........................................................................................... 6
Configuring Instrument...................................................................................................... 9
RS-232 Modem Kit Instruments........................................................................................................... 9
EnviroRanger ERS 500 ..................................................................................................................9
Accumass BW500/SF500: .........................................................................................................10
AiRanger with SmartLinx®Modbus RTU card ....................................................................11
Open Channel Meter OCM III ...................................................................................................12
RS-232 Modem to PC Connection..................................................................................................... 12
RS-485 Modem Kit Instruments......................................................................................................... 13
Modem Dip Switch Settings .....................................................................................................13
MultiRanger 100/200, HydroRanger 200 ................................................................................13
IQ Radar 300 .................................................................................................................................14
AiRanger with SmartLinx®Modbus RTU Card (for multidrop applications) ................14
EnviroRanger ERS 500 ................................................................................................................15
Configuring Internal Modem.......................................................................................... 17
Communicating using Modbus ................................................................................................17
Communicating using Flow Reporter .....................................................................................18
Siemens Hardware
Page ii External Modem Kit – INSTRUCTION MANUAL 7ML19981DP02
7ML19981DP02 External Modem Kit – INSTRUCTION MANUAL Page 1
Specifications
RS-232 Modem Kit
Modem:
• VT-Modem-1 WW, SIXNET external modem, DIN rail or flat panel mountable
• refer to SIXNET modem manual and CD
Power Supply:
• Siemens 120 V AC/230V AC input, 24V/1.3A output, DIN rail or flat panel mountable
• refer to Siemens power supply manual
Compatible Instruments:
• EnviroRanger ERS 500, Accumass BW500/SF500, AiRanger with SmartLinx®
Modbus RTU card, OCM III Open Channel Meter
RS-485 Modem Kit
Modem:
• VT-Modem-3 WW, SIXNET external modem, DIN rail or flat panel mountable
• refer to SIXNET modem manual and CD
Power Supply:
• Siemens 120 V AC/230V AC input, 24V/1.3A output, DIN rail or flat panel mountable
• refer to Siemens power supply manual
Compatible Instruments:
• MultiRanger 100, MultiRanger 200, HydroRanger 200, IQ Radar 300, AiRanger with
Smartlinx®Modbus RTU card (for multi-drop applications), EnviroRanger ERS 500
with option card (for multi-drop applications)
Warranty
All components of the external modem kit are covered by their individual manufacturer’s
warranties. Siemens Milltronics Process Instruments Inc. does not provide warranty on
any of the modem kit components, separately or together.
Note: The RS-232 Modem Kit can be used as a modem connected to the PC as well.
Siemens Hardware
Page 2 External Modem Kit – INSTRUCTION MANUAL 7ML19981DP02
The External Modem Kit
The External Modem Kit is assembled to assist users connecting external modems to
Milltronics brand products. While any modem can work with Siemens Milltronics brand
products, the VT-Modem by SIXNET is easy to use and reliable. For best results, use the
RS-232 Modem Kit for the PC side and RS-232 and RS-485 Modem kit for device side.
When connecting to the OCM III, Siemens Milltronics recommends using Flow Reporter
software. When working with Modbus RTU, we recommend the Modbus Serial driver by
Kepware (www.kepware.com).
Components
RS-232 Modem Kit RS-485 Modem Kit
SIXNET VT-Modem-1 WW Modem SIXNET VT-Modem-3 WW Modem
modem programming cable (DB-9) modem programming cable (DB-9)
Siemens power supply, 24V/1.3A Siemens power supply, 24V/1.3A
2-wire power transfer cable 2-wire power transfer cable
3-wire custom communication cable RS-485 cable (3 ft)
7ML19981DP02 External Modem Kit – INSTRUCTION MANUAL Page 3
Dimensions
RS-232 Modem
RS-485 Modem
120.7mm
(2.92")
80.5mm
(3.11")
74.2mm
(2.92")
RJ-11 jack
DB-9
connector
power terminal
block
RJ-11 jack
RS-485 terminal block
DB-9 connector
dip switches
power terminal
block
74.2mm
(2.92") 120.7mm
(4.75")
80.5mm
(3.11")
Siemens Hardware
Page 4 External Modem Kit – INSTRUCTION MANUAL 7ML19981DP02
Power Supply
57.2mm
(2.25")
88.9mm
(3.50") 69.8mm
(2.75")
7ML19981DP02 External Modem Kit – INSTRUCTION MANUAL Page 5
Assembly Instructions
1. Turn off the main AC power supply. Connect the AC power cable to the AC power
connection on the power supply marked as Nand L1.
2. Connect the power transfer cable to the power supply and modem as follows:
• +V on power supply to terminal 2 (+) on modem using clear wire.
• –V on power supply to terminal 3 (-) on modem using black wire.
Connect the ground on the modem to the cabinet ground (wire not provided).
3. Turn on power to the power supply. Connect modem programming cable to modem’s
DB-9 connector and then to an available port on a PC (eg. Com 1).
4. Configure external modem. See detailed instructions on page 6.
Disconnect the programming cable when finished.
5. Connect the Siemens Milltronics product to the external modem using the
appropriate wiring code (see Configuring Instruments on page 9).
6. Program the Siemens Milltronics product using the correct parameters listed in
Configuring Instruments section. Connect external modem to analog phone line
using RJ-11 telephone cable in the modem’s line jack.
7. Configure the internal modem in laptop or desktop PC using Windows 95 or 98 to
communicate using Modbus RTU protocol. (See Configuring Internal Modem on
page 17.)
8. Dial in to Siemens Milltronics product using internal modem.
Note: Customer supplied required parts and tools:
• power cable
• cabinet ground wire
•ohmmeter
• RJ-11 phone cord
Note: When modem and power supply are mounted in an external enclosure,
ensure they are not exposed to the elements, dust, or debris.
N
321
--
-
+
+
+
L1
Communications Cable
Black Clear
Power connection
Siemens Hardware
Page 6 External Modem Kit – INSTRUCTION MANUAL 7ML19981DP02
Configuring External Modem
Install SIXNET Modem Setup Wizard from SIXNET CD. After installation, run the SIXNET
Setup Wizard. When configuring the VT-Modem-1, choose default options after changing
country of installation (See Step 2).
1. Open configuration file and choose the file for your application.
2. Choose country from drop-down list if installation is outside North America.
3. Click Next.
File Name Associated Product
SMPI_modbus232.6ms EnviroRanger ERS 500, Accumass BW500, Accumass
SF500, AiRanger with Smartlinx Modbus RTU Card
SMPI_OCM.6ms OCM III
SMPI_modbus485.6ms MultiRanger 100 / 200, HydroRanger 200,
IQ Radar 300, AiRanger with Smartlinx Modbus RTU Card
(multi-drop applications)
SMPI_ocm_master.6ms PC connecting to OCM III (via FlowReporter)
SMPI_modbus_master.6ms PC connecting to Siemens Milltronics Modbus devices
Notes
• If the files listed above are not on the SIXNET CD, they can be found on the
Siemens Milltronics web site at www.siemens-milltronics.com
• The SIXNET Modem Setup Wizard screens will differ slightly according to the
configuration file shown. The example shown is for Modbus RS-232
communication.
1*
2
3
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung