MIMAKI TS300P-1800 Bedienungsanleitung

TS300P-1800 Print Guide

(for TxLink3)

Thank you for purchasing our inkjet printer TS300P-1800.

This “Print Guide” explains the printing method using TS300P-1800 and the software RIP [TxLink3] and items

to be checked/set before printing.

First, confirm the following items:

Before printing, the preparation for TS300P-1800 and the software RIP [TxLink3] is required.

First, prepare the followings:

About system configuration (Refer to P. 2)

The explanation of the system configuration to print is described.

Prepare TS300P-1800 (Refer to P. 3)

To use TS300P-1800, the items below are explained:

Connect the PC in which the software RIP [TxLink3] has been installed with TS300P-

1800.

Turn on the power supply.

Depending on the media to be set, adjust the print head height etc.

Set the media.

Perform test printing to check whether there is no nozzle clogging etc.

Correct the feeding rate of media.

Correct the ink drop position.

Prepare the TxLink3 (Refer to P. 4)

The preparation of the software RIP [TxLink3] is explained.

For the installation method, refer to the manual of the TxLink3.

The printing method using a sample is

explained.

Here, the printing method using a sample image included in the attached CD.

Perform printing (Refer to P. 7)

Some typical questions are described.

Typical questions (Refer to P. 9)

- 2 -

First, confirm the following items:

About system configuration

Instruct to print the printing data created with the application such as Illustrator or Photoshop etc. from the PC in

which the TxLink has been installed.

Send the data to be printed to the PC in which

TxLink3 has been installed.

Instruct to print from

TxLink3.

- 3 -

Prepare TS300P-1800

Following the procedures below, prepare TS300P-1800.

1. Connect a PC in which the RasterLink is

installed with TS300P-1800.

• For details, refer to Chapter 1 “Connecting Cables”

of TS300P-1800 Operation Manual.

2. Turn on the power supply of TS300P-1800.

• For details, refer to Chapter 2 “Turning the Power ON”

of TS300P-1800 Operation Manual.

3. Before setting a media, check the height of

print head.

• For details, refer to Chapter 2 “Adjusting the Head

Height” of TS300P-1800 Operation Manual.

• Adjust the Height-adjusting lever depending on the media

to be used.

4. Set the media.

• When setting the roll media : Chapter 2 “Setting a roll media” of TS300P-1800 Operation

Manual

• When setting the leaf media : Chapter 2 “Setting leaf media” of TS300P-1800 Operation

Manual

5. Perform a test printing.

• Check if discharging defect such as nozzle clogging exists or not.

• For details, refer to Chapter 2 “Test Printing” of TS300P-1800 Operation Manual.

6. Perform a media correction.

• Correct the feeding rate of media.

• For details, refer to Chapter 2 “Setting of Media Correction” of TS300P-1800 Operation Man-

ual.

7. Perform a dot position correction.

• Correct the ink drop position.

• For details, refer to Chapter 2 “If the Positions of Dots Shift...” of TS300P-1800 Operation

Manual.

USB cable

Ethernet cable

Power switch

Height-adjusting lever

- 4 -

Prepare the Mimaki Driver

1. Check if the attached Mimaki Driver is installed.

• For the installation, refer to Installation Guide of the attached Mimaki Driver.

Prepare the TxLink3

Check that the software RIP [TxLink3] is prepared.

1. Check if the TxLink3 is installed.

• TxLink3 is displayed on the Start menu if the software is

already installed.

• For the installation, refer to Installation Guide of the RasterLink.

2. Check the connection with TS300P-1800.

(1) Is the power supply of TS300P-1800 turned ON?

(2) Is the PC in which the TxLink3 is installed connected with TS300P-1800?

3. Place the installation CD for TxLink3 in the disk drive.

• Exit the autorun of the CD if it occurs.

4. Start TxLink3.

• Select TxLink3 from the Start menu.

5. Import the print environment file.

• The print environment file contains the initial values of model, profile, and output settings. You can

perform appropriate outputs by using this file.

• If the print environment file is already set up, the following operation steps are not required. Then

proceed to 6.

(1) Select [Import] in the [No print environment has

yet been defined] screen.

(2) Open the [Print environments] folder in the installation CD for TxLink3.

(3) Select the profiles for desired media/output settings, and click [Open].

(4) The [Print Environments] screen is displayed.

• You can select multiple files simultaneously.

- 5 -

6. Perform port settings.

• You need to perform appropriate port settings for respective print environments.

• If an appropriate port is already set, the following operation steps are not required. Proceed to

"Perform Printing".

(1) Select a desired print environment on the [Print environments] screen, and click the [Set-

tings...] button.

(2) Then appears the [Print settings] screen. Select the [Printer and Port] screen from the list on

the left.

(3) Click the [+] (Add) button.

Select

Click

Select

Click

- 6 -

(4) The [Edit Printer Settings] dialog is displayed.

(5) Set [Status Monitor] to "Mimaki".

(6) Click [Add] button.

(7) The [Add Port] dialog is displayed.

Select an appropriate port type according to the interface to be used.

(8) Click [OK].

The [New Printer] dialog is displayed. Enter an appropriate name indicating the connected

printer, and click [OK].

(9) Close the [Print settings] screen.

(10)Close the [Print environments] screen.

Select

Click

- 7 -

Perform printing

Here, the printing method using a sample image included in the CD of the TS300P-1800 Operation Manual.

1. Start TxLink3.

2. Set the CD of TS300P-1800 Operation

Manual into the disk drive.

3. Click [Print Guide / Sample data].

• The “Print Guide and Sample Data” dialog is dis-

played.

4. Specify the data you wish to print by using TxLink3.

(1) Select [Import image] from the [File] menu.

(2) The [Import] dialog is displayed. Select an image in the folder described in step 3, and click

[Open].

5. Select the loaded image.

6. Select the following items from [Properties] in the main window, and

check and/or change the various settings.

• Scale: Enlarges or reduces the image

• Rotate Mirror: Rotates and/or reverses the image

• Check P. 2 to P. 4 “First, confirm the following items:” without fail before creating a seal/a

sticker.

- 8 -

7. Select a print environment.

• If you have a desired media/output setting for printing, select the setting from the combo box on

the top of the screen.

8. Start printing.

(1) Select [Print ...] from the [File] menu.

(2) The [Print] dialog is displayed.

(3) Click [OK].

(4) Printing is performed.

- 9 -

Typical questions

The answers to the questions/ the troubles frequently asked by the customer are provided.

About errors

“Replace a Wiper”is displayed

Time for replacement of the wiper has come.

Replace the wiper by following the procedures in Chapter 4 “Replacing the wiper” of TS300P-1800

Operation Manual.

“Waste ink full” is displayed

The waste ink tank is full. Replace the waste ink tank by following the procedures in Chapter4 “If a Waste

Ink Tank Confirmation Message Appears” of TS300P-1800 Operation Manual.

Supplied items

Purchase them in a distributor in your district or our office.

Name of part Part codes Name of part Part codes

Cleaning Liquid 03 MAINTENANCE KIT ML003-2-K1 Exhaust BOX SPA-0248

Waste ink tank (2L) SPA-0246 Exhaust BOX filter SPA-0249

Cutter blades assy SPA-0107 Wiper kit 300 TS SPA-0271

Clean stick for the surroundings of the head 50pcs SPC-0527 CP Pad Set SPA-0269

D202917-10-06072015

Andere Handbücher für TS300P-1800

Inhaltsverzeichnis

Andere MIMAKI Drucker Handbücher

MIMAKI

MIMAKI UJF-3042HG Bedienungsanleitung

MIMAKI

MIMAKI jV100-160 Bedienungsanleitung

MIMAKI

MIMAKI UJF-3042 MkII Bedienungsanleitung

MIMAKI

MIMAKI Tx300P-1800B Bedienungsanleitung

MIMAKI

MIMAKI TS55 Bedienungsanleitung

MIMAKI

MIMAKI UJV100-160 Montageanleitung

MIMAKI

MIMAKI JV150-130 Bedienungsanleitung

MIMAKI

MIMAKI CJV300-130 Bedienungsanleitung

MIMAKI

MIMAKI GP-1810 Bedienungsanleitung

MIMAKI

MIMAKI SWJ-320EA Wartungshandbuch

MIMAKI

MIMAKI UJF-3042MkII e Wartungshandbuch

MIMAKI

MIMAKI JV5 Series Bedienungsanleitung

MIMAKI

MIMAKI JV33-160A Betriebsanleitung

MIMAKI

MIMAKI TS500P-3200 Bedienungsanleitung

MIMAKI

MIMAKI JV3-250 SP Bedienungsanleitung

MIMAKI

MIMAKI UJF-3042FX Bedienungsanleitung

MIMAKI

MIMAKI JV33-130 Bedienungsanleitung

MIMAKI

MIMAKI TS55-1800 Bedienungsanleitung

MIMAKI

MIMAKI TX300P-1800 Bedienungsanleitung

MIMAKI

MIMAKI Tiger600-1800TS Leitfaden

MIMAKI

MIMAKI UJF-3042HG Montageanleitung

MIMAKI

MIMAKI UJF-3042MkII EX Wartungshandbuch

MIMAKI

MIMAKI JV3-160SP Betriebsanleitung

MIMAKI

MIMAKI CG-60AR Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung