Minelab F3 Bedienungsanleitung

Operations Manual

F3 COMPACT

Lightweight Compact Metal Detector

Disclaimer

As a world leader in metal sensing technology, Minelab

strives to continually improve its product range. Minelab

reserves the right to introduce changes to the design,

technical features and accessories of this product.

Patents and Trademarks

Patents and trademarks may apply to this product.

See www.minelab.com/patents

Operations Manual

4901-0174-6

F3 COMPACT

Lightweight Compact Metal Detector

Introduction............................................................................................................................................................6

General Description and Preparation ......................................................................................7

Mine Detecting Set..................................................................................................................................................... 7

F3 Compact Main Components.........................................................................................................................8

F3 Compact Preparation...................................................................................................................................... 10

Functional Description............................................................................................................................14

Functional Controls and Displays.................................................................................................................. 14

On/Off Switch .................................................................................................................................................................. 14

Sensitivity Knob ...............................................................................................................................................................15

Ground Balance/Audio Reset Button....................................................................................................................16

Noise Cancel Button ......................................................................................................................................................16

Volume Control..................................................................................................................................................................17

LED Display ........................................................................................................................................................................ 18

Battery Status..................................................................................................................................................................19

Earset Socket....................................................................................................................................................................19

Functional Tones .......................................................................................................................................................20

Test Piece — Functional Test............................................................................................................................ 21

Operating Procedures.............................................................................................................................22

Introduction.................................................................................................................................................................. 22

Standard Procedure............................................................................................................................................... 22

STEP 1 Switch On........................................................................................................................................................... 23

STEP 2 Ground Balance.............................................................................................................................................. 24

STEP 3 Test Piece ......................................................................................................................................................... 25

Contents

Optional Procedures............................................................................................................................................... 26

Noise Cancel..................................................................................................................................................................... 26

Audio Reset ...................................................................................................................................................................... 27

Sweeping Procedure .............................................................................................................................................. 29

Pinpointing Procedure.................................................................................................................................................30

STEP 1 Mapping the Target........................................................................................................................................ 31

STEP 2 Pinpointing the Target................................................................................................................................ 32

Multiple Targets......................................................................................................................................................... 33

STEP 1 Mapping Multiple Targets........................................................................................................................... 33

STEP 2 Determining the Centre of Target........................................................................................................ 34

Operating Multiple Detectors in Close Proximity ............................................................................ 35

Completion of Operations................................................................................................................................... 36

Care and Troubleshooting...................................................................................................................37

Routine Care................................................................................................................................................................. 37

Troubleshooting .........................................................................................................................................................38

Specifications...................................................................................................................................................39

6 | Introduction F3 Compact Operations Manual

Introduction

Since 1996, Minelab has designed, developed and manufactured its range of

detectors to meet the requirements of mine and unexploded ordnance clearance

operations throughout the world. Through its patented and unique technology,

Minelab has emphasised equipment capability and operator safety in its products.

The F3 Compact is a lightweight, compact detector that includes a uniquely

designed mechanical platform thereby providing superior ergonomics. It is a

robust detector that is extremely simple to operate.

Figure 1: F3 Compact mine detector

The F3 Compact incorporates patented bipolar technology that enhances

Minelab’s renowned and highly successful Multi-Period Sensing (MPS) technology.

Through MPS, the sensitivity of a detector remains consistent regardless of

the mineralised content of soil. Bipolar technology also helps to eliminate the

possibility of initiating a magnetic influence mine. Combined with ‘static coupling’

the F3 Compact does not require motion to detect a target thereby making

pinpointing techniques fast and accurate.

When working in an environments with highly mineralised ground or electrical

interference from overhead power lines or other sources, simple and quick semi-

automatic procedures can be initiated by an operator resulting in the detector

continuing to perform at maximum capability.

The F3 Compact incorporates several safety features such as Low Battery

and System Fault warnings, audible confirmation at the completion of specific

operational procedures, and continuous microprocessor controlled internal self-

testing. The inclusion of a Test Piece provides the operator with a quick and easy

check to ensure that the detector is working at its operational capability.

The F3 Compact also provides a visual indication of detection via a Light Emitting

Diode (LED) display. Adjustments to sensitivity and volume settings are possible. If

required, the F3 Compact can be programmed to user initiated customised volume

and sensitivity selections using Minelab’s configuration software.

Components of the F3 Compact are manufactured within tightly controlled

parameters so that they can be interchanged in the field without any requirement

for calibration. The F3 Compact is designed to satisfy MIL-STD-810G.

NOTE

Although the F3 Compact can withstand immersion to a depth of three metres for

short periods of time, it is NOT designed for use as an underwater detector.

General Description and Preparation | 7F3 Compact Operations Manual

General Description and Preparation

Mine Detecting Set

The F3 Compact is supplied as a mine detecting set (Figure 2), comprising:

• Hard Case (optional)

• Detector

• Soft Carry Bag

• Earset (Speaker On or

Speaker Off variants)

• Operations Manual

• Field Guide

• Test Piece

• Four C Cell Batteries

(Alkaline or Rechargeable)

Operations

Manual

Field Guide

Figure 2: F3 Compact mine detecting set

The optional Hard Case permits the stowage of the detector inside the Soft Carry

Bag and provides protection for the detector when in transit or placed in storage.

The Soft Carry Bag allows the operator to comfortably carry the detector when

use of the Hard Case is impractical. The Soft Carry Bag is not suitable for use

when transporting the detector by road or air. For added protection during road or

air transport, it is recommended that the detector be packed in the Hard Case.

8 | General Description and Preparation F3 Compact Operations Manual

F3 Compact Main Components

Figure 3 identifies the main components of the F3 Compact.

Armrest Strap

Armrest

Handle Assembly

Shaft Hinge

Upper Camlock

Lower Camlock

Coil

Coil Pivot Assembly

Skid Plate

Upper Shaft

Middle Shaft

Lower Shaft

Controls

Main Body

Earset Connector

Battery

Compartment

Test Piece

Figure 3: F3 Compact main components

General Description and Preparation | 9F3 Compact Operations Manual

Battery Compartment – contains four C cell alkaline or rechargeable batteries. A

battery map is provided to indicate correct alignment of batteries when inserted

into the compartment.

Armrest and Strap – provided for operator comfort when the detector is used for

prolonged periods. The Armrest can be extended for operator comfort.

Test Piece – conveniently stowed on the Armrest to allow the operator to ensure

the detector is working at its operational capability.

Earset Connector — provides connection for the Earset and also the

programming cable when using the configuration software to customise

volume and sensitivity settings.

Main Body — waterproof housing containing the detector electronics and batteries.

Handle Assembly — collapsible handle that also contains Ground Balance/Audio

Reset button, Volume adjustment buttons.

Controls — On/Off and Volume/Sensitivity selection knobs — both controls cannot

be accidentally rotated.

Shaft Hinge — pivot point for unfolding or folding the shafts. The hinge is only

locked in position when the Handle Assembly is in its deployed position.

Upper, Middle, Lower Shafts — carbon fibre shafts that are adjustable for

operator comfort and for changes in demining positions.

Upper and Lower Camlocks — self-cleaning locking mechanisms to secure middle

and lower shafts.

Coil Pivot Assembly — permits the tilt and rotation of the coil and provides a

tension screw for adjustment as required.

Coil — waterproof enclosed coil to eliminate possible interference from vegetation.

Skid Plate — removable cover that protects and prolongs the life of the coil

thereby reducing maintenance costs.

10 | General Description and Preparation F3 Compact Operations Manual

F3 Compact Preparation

To prepare the detector for use, conduct the following procedure:

a. Open the Hard Case and/or Soft Carry Bag.

b. Remove the detector and inspect for obvious signs of damage.

If damage is evident, report to the supervisor/team leader.

c. Unlock the Battery Compartment Lid by twisting the Battery Lock Lever counter

clockwise one-quarter turn. Once unlocked, pull the lid away from the Battery

Compartment (the lid will stay attached by a tether as shown in Figure 4).

d. Using the battery map located on the side of the Main Body, insert four C

cell batteries. Taking care not to snag or trap the tether, replace the Battery

Compartment Lid and rotate the Battery Lock Lever clockwise one-quarter

turn. If the batteries are inserted incorrectly, the detector will fail to function

when switched on.

e. Using Figure 5 as a guide, unfold and adjust the detector.

f. Extend the Lower and Middle Shafts to suit the selected demining position as

shown in Figure 7.

Figure 4: Removing the Battery Compartment Lid

NOTE

The F3 Compact requires four C cell batteries for operation. Use only high quality

alkaline or rechargeable batteries. Minelab recommends that only rechargeable

batteries with a capacity of 5000 mAH or greater be used with the F3 Compact.

Rechargeable batteries have speciﬁc charge/discharge maintenance requirements,

which should be strictly followed to ensure maximum battery life.

Andere Handbücher für F3

Inhaltsverzeichnis

Andere Minelab Metalldetektor Handbücher

Minelab

Minelab F3 Bedienungsanleitung

Minelab

Minelab GPX5000 Bedienungsanleitung

Minelab

Minelab Manticore Bedienungsanleitung

Minelab

Minelab Sovereign GT Bedienungsanleitung

Minelab

Minelab X-Terra 305 Bedienungsanleitung

Minelab

Minelab SD 2200D Bedienungsanleitung

Minelab

Minelab F1A4 Technische Daten

Minelab

Minelab GPX 6000 Bedienungsanleitung

Minelab

Minelab Musketeer Colt Bedienungsanleitung

Minelab

Minelab X-Terra 705 Bedienungsanleitung

Minelab

Minelab 3011-0301 Bedienungsanleitung

Minelab

Minelab EQUINOX 600 Bedienungsanleitung

Minelab

Minelab VANQUISH 340 Bedienungsanleitung

Minelab

Minelab GPX 6000 Bedienungsanleitung

Minelab

Minelab F3Ci Bedienungsanleitung

Minelab

Minelab X-TERRA Series Bedienungsanleitung

Minelab

Minelab SDC 2300 Bedienungsanleitung

Minelab

Minelab F3 Bedienungsanleitung

Minelab

Minelab The Sovereign Bedienungsanleitung

Minelab

Minelab Sovereign XS-2 Pro Bedienungsanleitung

Minelab

Minelab GPX5000 Bedienungsanleitung

Minelab

Minelab Explorer SE Bedienungsanleitung

Minelab

Minelab VANQUISH 340 Bedienungsanleitung

Minelab

Minelab Musketeer ADVANTAGE Bedienungsanleitung

Beliebte Metalldetektor Handbücher anderer Marken

Garrett

Garrett MAGNASCANNER CS 5000 Bedienungsanleitung

Valex

Valex 1800200 Bedienungsanleitung

Gauss

Gauss MIL MD Bedienungsanleitung

Velleman

Velleman CS130 Bedienungsanleitung

Sears

Sears 321.596370 Bedienungsanleitung

Eriez

Eriez X8 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-22 Bedienungsanleitung

Zircon

Zircon MetalliScanner m60c Bedienungsanleitung

nalanda

nalanda MD027 Bedienungsanleitung

REV Ritter

REV Ritter CB-7005 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs F70 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-12 Bedienungsanleitung

GOLDEN MASK

GOLDEN MASK 5 Bedienungsanleitung

Grizzly

Grizzly YM 203 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Bedienungsanleitung

Treasure Cove

Treasure Cove Vibra-Probe 560 Bedienungsanleitung

Accurate Locators

Accurate Locators XL16 IMAGER Bedienungsanleitung

Teknetics

Teknetics G2 Bedienungsanleitung