Mini?Cam Proteus ACR350 Benutzerhandbuch
Automatic Cable Reel
ACR350 / ACR500
(including VGP350/ VGP500)
Original Instruction Manual
Version B
PLEASE NOTE
For the purpose of this Original Instruction Manual
Proteus
™
ACR (Automatic Cable Reel) will be referred
to using the abbreviation ACR
Proteus
™
RJP (Joystick Remote Control) will be referred
to using the abbreviation RJP
Proteus
™
Control Unit will be referred to as CCU
Both sizes of cable reel will be referred to generically as ACR.
The instructions in this manual are for use with ACR350 and ACR500.
3
This instruction manual is applicable to the ACR Automatic Cable Reel.
A standard cable reel and available options are covered by this document.
Disclaimer
Hardware and software mentioned in this document are subject to continuous
development and improvement. Consequently, there may be minor difference
between the information in the document and the performance or design of the
product. Specifications, dimensions and other statements in this document are
subject to change without prior notice.
Mini-Cam Ltd and its suppliers shall not be liable for any damages related to this
software or hardware, or for any other damages whatsoever caused by the use
of or inability to use any Mini-Cam product. This is applicable even if Mini-Cam
has been advised of the damage risk. Under any circumstances, Mini-Cam’s entire
liability shall be limited to replace such defective software or hardware that was
originally purchased from Mini-Cam.
Mini-Cam Limited
Unit 4 Yew Tree Way, Golborne, Warrington, Cheshire WA3 3JD.
Phone: +44 (0) 1942 444555
Company Registered in England & Wales • Company Registration No: 3728693
Proteus ACR350/500
4
Version B
Proteus ACR350/500
5
Version B
Contents
Warranty 9
Limited Warranty 9
Extent of the Limited Warranty 9
Conditions of the Limited Warranty 9
Warranty Limitations 9
System Overview 10
EC Declaration of Conformity 11
CE Declaration 11
Warnings and Safety Measures 12
Before First Use 15
Personal Safety 17
Maintenance 19
Cleaning 20
Checking Plug and Socket Connections 21
VGP350/500 Van Guide Pulley
Product Overview 24
Parts and Descriptions 25
Adjusting the Pulley Arm 26
Extending the Pulley Arm 28
Locking the Pulley Arm 30
Routing Cable on the Pulley Wheel 31
Technical Specifications 34
VGP350 - Van Guide Pulley 34
VGP500 - Van Guide Pulley 34
Proteus ACR350/500
6
Version B
ACR350/500 Automatic Cable Reel
Product Overview 36
Parts and Descriptions 38
Connections 39
ACR Buttons 40
Modes 41
Adjusting Payout Speed Limit 43
Motor Auto Rewind Speed 43
Adjusting the Rewind Speed 44
Decrease auto rewind speed 44
Increase auto rewind speed 44
Selecting the Crawler Wheel Size 45
Selecting Wheel Size when Powering-On the Crawler 45
Selecting the Wheel Size at other times 46
Status Display for the ACR 47
Idle 47
Paying out 47
Rewinding 47
Lost communication with CCU 47
Blockage 47
Controlling the ACR 48
Controlling using the keyboard keys 48
Rewind cable back onto the drum 48
Decrease rewind speed 48
Increase rewind speed 48
Control using the Coloured Keys 49
Stopping Continuous Rewind 51
Clearing the Motor Stop Condition 55
End of the Cable Detection 57
Proteus ACR350/500
7
Version B
Removable Drip Tray 58
Troubleshooting 59
Technical Specifications 60
ACR350 - Automatic Cable Reel 60
ACR500 - Automatic Cable Reel 60
RJP Joystick Remote Control
Product Overview 63
Parts and Descriptions 64
Pairing RJP with ACR 65
Connecting RJP 66
RJP Operational Range and Disconnection 67
Mode Selection 67
Joystick Positions and Movement 68
Modes 69
ACR Only and ALL STOP! 72
ACR Blocked and Motor Stop Button Pressed 72
CCU and RJP Interactions 72
Charging the Battery 73
Useful Information
Product Serial Numbers 75
Service and Repair 75
WEEE Statement 76
Batteries 77
Proteus ACR350/500
8
Version B
Proteus ACR350/500
9
Version B
Limited Warranty
Congratulations on the purchase of your Proteus
™
ACR (Automatic Cable
Reel). Our products are the result of many years experience and continuous
developments.
Conscientious manufacturing and checking are essential objectives
in our company.
Nevertheless failures cannot be excluded totally. If this occurs,
you are covered by our generous warranty. Please consider that even the best
products
can only be durable and work properly with the correct handling and
maintenance.
Extent of the Limited Warranty
Mini-Cam Limited warrants that your equipment will be in good working condition
and free of defects in material and/or workmanship for a period of one year.
If
failure occurs, which is provable due to a defect in material and/or workmanship,
we will remedy it free of charge during the warranty period. We reserve the right,
at our option, to repair the equipment or to replace the whole unit or the faulty
parts, or to refund the then current value of the equipment, if we are unable to
repair or replace the unit. The warranty is a return to base warranty and we are
not liable for any shipping costs.
Conditions of the Limited Warranty
Disassembling the camera, coiler, control unit or any part of the system, without
approval of the manufacturer, is forbidden! Non-compliance of this direction will
result in the loss of the warranty. The beginning of the warranty period is the date
of delivery. This limited warranty does not cover damage due to improper
treatment of the system, inadequate maintenance, alteration, repair, normal
wear and tear or external causes like lightning, fire or frost. The warranty does
not cover wear and tear parts like front camera lenses, O-rings, cable, push rod,
rod rollers
etc. If you require warranty service please return the system with the
original invoice
to your dealer or the nearest Mini-Cam Service Centre. Equipment
returned must be consigned carriage paid. We will not be liable for carriage costs.
Warranty Limitations
Our responsibility under this warranty is limited to repair, replacement or refund,
as set forth above. Mini-Cam Limited is not responsible for direct, special,
incidental or consequential damages resulting from any breach of warranty
including lost profits, downtime, goodwill, damage to or replacement of
equipment and/or property.
Warranty
Proteus ACR350/500
10
Version B
Developed for use in a CCTV inspection van, the Proteus
™
ACR is fitted with
350/500 metres of high strength, Kevlar reinforced inspection cable. Ultra-smooth
operation is provided by the powerful, three phase motor and cable layering
mechanism, specially designed for uninterrupted, tangle free pay-out and re-
winding. A rigid, clear safety screen and protective cover prevents contact with
the cable whilst coiling, and for additional safety there is an instant motor stop
button.
The ACR will be factory mounted in the inspection van, on to the (VGP350/500)
Van Guide Pulley.
Operation is controlled using the hand held RJP Bluetooth
®
Joystick Remote
Control (included) which is also capable of controlling camera and crawler
functions, or use the ACR control panel buttons in conjunction with the dedicated
keys and intuitive on-screen display on the Proteus
™
VCU.
Built using high quality materials and state of the art technology the ACR is a
robust and powerful tool for use in harsh environments.
System Overview
NOTE!
Have the system regularly serviced by a Mini-Cam Authorised
Service Centre.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Mini?Cam Kabel und Steckverbinder Handbücher
