Mini Gadgets OmniInverter Bedienungsanleitung

1 Version 1.1

OmniEye Inverter Manual

SKU: OmniInverter

2 Version 1.1

THANK YOU FOR PURCHASING THE

OMNIINVERTER HIDDEN CAMERA

Please read this manual before operating the

camera and keep it handy.

Your purchase should include:

1 x OmniInverter

1 x AC Wall Adapter

1 x Manual

1 x A/V Cable

1 x 3.5mm to USB Cable

1 x Remote

1 x 16GB MicroSD Card

1 x MicroSD Card Reader

3 Version 1.1

GET FAMILIAR WITH YOUR OMNIINVERTER HIDDEN

CAMERA

4 Version 1.1

5 Version 1.1

OPERATING THE CAMERA

IMPORTANT NOTES:

Due to this camera being powered by your car’s

power socket, you MUST stop recording prior

to turning your car’s engine off. If you do not,

the video file will be corrupted and

unrecoverable.

If you stop your vehicle’s engine, the unit will

power off. You will need to power it on and

initiate recording again the next time you start

your car.

If your car’s power socket is permanently

powered and the camera is recording, your

vehicle’s battery will drain in order to continue

recording.

HOW TO TURN ON THE CAMERA

1. Plug the device into your car’s power socket.

2. Using the provided remote, power on the

device (see page 4).

6 Version 1.1

3. The camera will power on and immediately

enter motion detection recording mode.

4. If you wish to stop recording and enter standby

mode, press the “Motion Detection” button on

the remote (see page 4).

5. The indicator light will turn on indicating the

unit is in standby mode.

HOW TO RECORD VIDEO

1. When the camera is in Standby Mode, press the

“Continuous Recording Mode” button (see

page 4). The Indicator LED will flash two times.

2. Once the Indicator LED turns off, the camera is

now recording video.

HOW TO STOP RECORDING VIDEO

1. While the camera is recording video press the

“Continuous Recording Mode” button once

more. (The Indicator LED will turn on.)

2. The camera has now stopped recording and is

now in Standby Mode.

7 Version 1.1

HOW TO TAKE PICTURES

1. When the camera is in Standby Mode, press the

“Photo Button” (see page 4). The green light

will turn red while the photo is being taken.

2. Once the photo is taken, the light will turn back

to green and once again be in standby mode.

HOW TO RECORD MOTION DETECTION

1. When the camera is in Standby Mode, press the

“Motion Detection Button” (see page 4).

2. If motion is detected, the light will flash 2 times

and turn off.

3. If there is no motion after 1 minute, the device

will return to detection standby mode until

motion is detected again. While waiting, the

Green light will be on.

NOTE: If you activate motion detection and there is no

motion currently in front of the camera, there will be no

indication you have entered into motion mode. The green

light will simply remain on. If you wish to confirm that

8 Version 1.1

you have entered into motion detection mode, wave your

hand in front of the camera lens. The unit will flash the

red light 2 times, then the light will turn off confirming

that the device detected your motion and is now

recording video.

HOW TO STOP RECORDING MOTION DETECTION

1. While the camera is recording motion

detection, press the “Motion Detection Button”

once more. (The Indicator LED will turn on.)

2. The camera has stopped recording motion

detection and is now in Standby Mode.

HOW TO USE PIR SENSOR

Note: The “Motion Detection” mode and “PIR” mode

work similarly in that they detect motion. The “Motion

Detection” mode relies on the camera itself to detect

motion, while the “PIR” mode relies on the PIR sensors

to detect motion. “PIR” represents “passive infrared

sensor”, which relies on measures of infrared light to

detect motion.

9 Version 1.1

Note: Only OmniX products come with a PIR sensor

installed. OmniEye products do not have this feature.

1. While the camera is in Standby Mode, press the

“PIR Sensor” button (see page 4).

2. If motion is detected, the indicator light will

flash, then turn off.

3. The device is now in PIR sensor mode.

4. If you wish to turn it off PIR sensor mode, press

the “PIR Sensor” button once more. The

indicator light will flash, and the camera is now

in standby mode.

CHANGING YOUR DEVICE SETTINGS (INCLUDING THE

DATE/TIME STAMP)

Your OmniInverter comes with an A/V cable that is

used to connect the device to a monitor/TV so that you

can adjust various settings. See page 3 to locate the AV

port on your device.

1. Connect your device to a monitor/TV using the

provided A/V Cable.

2. Power on the device.

10 Version 1.1

3. Press the motion detection button to stop

recording.

4. Press the “MENU” button on the remote.

5. A menu will display on the screen with various

options (Use OK, UP, Down, and Menu on the

remote to navigate the menu system):

a. Resolution –Select from different

resolutions.

b. Time Stamp –Use this option to enable

or disable the date/time stamp on

videos.

c. Loop Record –Choose whether you

want the device to automatically

overwrite the oldest file on the memory

card if the memory becomes full.

d. Video Time –When in continuous

recording mode, this setting determines

how long video files will be before the

current recording is stopped and a new

recording is started.

e. Audio Record (if applicable) –If you

purchased your device with audio

Inhaltsverzeichnis

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung