Mini Gadgets OmniXSmoke Bedienungsanleitung

1 Version 1.0

OmniXSmoke Detector Hidden

Camera

SKU: OmniXSmoke

2 Version 1.0

THANK YOU FOR PURCHASING THE OMNIXSMOKE

DETECTOR HIDDEN CAMERA

Please read this manual before operating the camera

and keep it handy.

Your purchase should include:

1 x OmniXSmoke

1 x Manual

1 x 16GB MicroSD Card

1 x MicroSD Card Reader

1 x 3.5mm to USB Cable

1 x Remote

1 x AC Adapter

3 Version 1.0

GET FAMILIAR WITH YOUR OMNIXSMOKE HIDDEN

CAMERA

4 Version 1.0

5 Version 1.0

IMPORTANT WARRANY INFORMATION: If the

warranty sticker on your device has been removed or

tampered with, your lifetime warranty will be voided.

You may be charged fees or denied a return should this

happen.

HOW TO CHARGE THE CAMERA

Note: If you are not located in the US, or if you intend

to use this product anywhere other than the US, you

will need to purchase a converter in order to use the AC

wall plug in and avoid damaging the product. Because

different countries use different voltages in their

electrical wiring, you will need a converter that adapts

to the current in your particular country.

1. Connect the wall plug to an outlet.

2. Connect the charging cable to the wall plug.

3. Connect the charging cable’s other end to the

DC Port on the inside of your device.

4. While charging, the LED will blink red.

5. When charging is complete, the LED will be a

solid green.

6 Version 1.0

OPERATING THE CAMERA

HOW TO TURN ON THE CAMERA

1. Point the remote at the device, and press the

power button on the remote. The Green light

will blink once and then the Red light will blink

3 more times and turn off (if motion is detected

immediately). The device is now in motion

detection mode.

NOTE: If the light doesn’t come on, try many different

angles when pressing the power button and pointing it

at the front/top of the unit. Do not hold down the power

button. Press and release the button only.

2. To put the device into standby mode, stop

motion recording by pressing the motion

detection button one time. The Green light will

come on and the device will be in standby

mode.

HOW TO RECORD VIDEO

7 Version 1.0

1. When the camera is in Standby Mode, press the

“Continuous Recording Mode” button (see

page 4). The Indicator LED will flash two times.

2. Once the Indicator LED turns off, the camera is

now recording video.

HOW TO STOP RECORDING VIDEO

1. While the camera is recording video, press the

“Continuous Recording Mode” button once

more. (The Indicator LED will turn on.)

2. The camera has now stopped recording and is

now in Standby Mode.

HOW TO TAKE PICTURES

1. When the camera is in Standby Mode, press the

“Photo Button” (see page 4). The green light

will turn red while the photo is being taken.

2. Once the photo is taken, the light will turn back

to green and once again be in standby mode.

HOW TO RECORD MOTION DETECTION

8 Version 1.0

1. When the camera is in Standby Mode, press the

“Motion Detection” button (see page 4).

2. If motion is detected, the Red light will flash 2

times and turn off.

3. If there is no motion after 1 minute, the device

will return to detection standby mode until

motion is detected again. While waiting, the

Green light will be on.

NOTE: If you activate motion detection and there is no

motion currently in front of the camera, there will be no

indication you have entered into motion mode. The green

light will simply remain on. If you wish to confirm that

you have entered into motion detection mode, wave your

hand in front of the camera lens. The unit will flash the

red light 2 times, then the light will turn off confirming

that the device detected your motion and is now

recording video.

HOW TO STOP RECORDING MOTION DETECTION

9 Version 1.0

1. While the camera is recording motion

detection, press the “Motion Detection” button

once more. (The Indicator LED will turn on.)

2. The camera has stopped recording motion

detection and is now in Standby Mode.

HOW TO RECORD WITH THE PIR SENSOR

Note: The “Motion Detection” mode and “PIR” mode

work similarly in that they detect motion. The “Motion

Detection” mode relies on the camera itself to detect

motion, while the “PIR” mode relies on the PIR sensors

to detect motion. “PIR” represents “passive infrared

sensor”, which relies on measures of infrared light to

detect motion.

Note: Only OmniX Products have a PIR sensor installed.

OmniEye products do not come with this feature.

1. When the camera is in Standby Mode, press the

“PIR” button on the remote (see page 4).

2. The LED will flash Red 3 times and turn off.

3. The unit is now in PIR Mode and is waiting for

motion. When motion is detected, the light will

10 Version 1.0

turn green, then red, and blink 3 times and turn

out. The unit is now recording.

4. To return to standby mode, press the PIR

button again. The light will return green to

indicate the unit is in standby mode.

CHANGING YOUR DEVICE SETTINGS (INCLUDING THE

DATE/TIME STAMP)

Your OmniXSmoke comes with an A/V cable that is

used to connect the device to a monitor/TV so that you

can adjust various settings. See page 3 to locate the AV

port on your device.

1. Connect your device to a monitor/TV using the

provided A/V Cable.

2. Power on the device.

3. Press the motion detection button to stop

recording.

4. Press the “MENU” button on the remote.

5. A menu will display on the screen with various

options (Use OK, UP, Down, and Menu on the

remote to navigate the menu system):

Inhaltsverzeichnis

Andere Mini Gadgets Sicherheitssensor Handbücher

Mini Gadgets

Mini Gadgets CDHunter Bedienungsanleitung

Mini Gadgets

Mini Gadgets CD550Pro Bedienungsanleitung

Mini Gadgets

Mini Gadgets CDRF Bedienungsanleitung

Mini Gadgets

Mini Gadgets CDB200 Bedienungsanleitung

Mini Gadgets

Mini Gadgets CD60 Bedienungsanleitung

Mini Gadgets

Mini Gadgets OmniRadar Bedienungsanleitung

Mini Gadgets

Mini Gadgets CDRFAD Bedienungsanleitung

Mini Gadgets

Mini Gadgets HCSmokeConeSD Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Solinst

Solinst 301 Bedienungsanleitung