Mini Gadgets Bush baby BB4KNEFuseBox Bedienungsanleitung

1 Version 2.0

Bush Baby Fuse box with

4K Night Vision Hidden

Camera

SKU: BB4KNEFuseBox

2 Version 2.0

THANK YOU FOR PURCHASING THE BB4KNEFUSEBOX

Please read this manual before operating the

BB4KNEFuseBox and keep it handy.

Your purchase should include:

1 x BB4KNEFuseBox

1 x Manual

1 x 128GB Micro SD Card

1 x MicroSD Card Reader

1 x Charging Board with LEDs

1 x AC Wall Adapter

1 x Removable Battery

1 x Mounting Screw Set

3 Version 2.0

GET FAMILIAR WITH YOUR BB4KNEFUSEBOX

4 Version 2.0

(See above graphic for lables)

5 Version 2.0

BEFORE YOU GET STARTED

IMPORTANT INSTRUCTIONS BEFORE GETTING

STARTED

1. In order to operate your device, you

must download the LookCamPro app to

your smartphone or tablet.

oAndroid:

www.minigadgets.com/lcpdroid

oiPhone:

www.minigadgets.com/lcpios

2. This device can only make one Wi-Fi

pairing attempt and then the TUT signal

will disappear. If the pairing process is

unsuccessful the device will be required

to be sent in for a factory reset. Please

verify the name of your router’s Wi-Fi

signal and password, and follow the

steps on the next page to ensure your

device has the best chance possible of

pairing with your router.

6 Version 2.0

•This device will only connect to routers

that produce a 2.4 GHz signal. Please

contact your internet service provider to

determine if your router is 2.4 or 5.8

GHz.

•If your wireless network has a password

using any special characters, please

change it so it is using only

numbers/letters.

•Turn off your phone’s mobile data prior

to connecting to the device’s wi-fi

signal. Some phones will ignore wi-fi

connections that do not have internet

access if mobile data is enabled.

•Make sure you are within 10 feet of

your router when pairing the device

with wi-fi. If the device gets hardwired

for power, pair the unit by powering it

with the test plug prior to hardwiring it

in.

7 Version 2.0

Note: If you are using this anywhere other than

the US, you will need to purchase a converter in

order to use the device and avoid damaging the

product. Because different countries use

different voltages in their electrical wiring, you

will need a converter that adapts to the current

in your particular country.

IMPORTANT: You will need to contact a

professional electrician to install this device

correctly. We are not responsible for any

damages or incorrect installation. Minigadgets

cannot provide any instructions related to

hardwiring this device into an electrical

system.

IMPORTANT WARRANY INFORMATION:

If the warranty sticker on your device has been

removed or tampered with, your lifetime

warranty will be voided. You may be charged

fees or denied a return should this happen.

8 Version 2.0

STEP ONE – ADDING THE DEVICE TO THE APP &

PAIRING WITH WI-FI FOR REMOTE VIEWING

Note: If you do not want to use your device for

remotely live streaming/video playback, you

can still use it as a DVR unit. You will be

required to connect your phone to the device’s

wi-fi signal in order to view the live stream, play

videos back via the app, or modify camera

settings. If you wish to use it as a DVR unit,

when you get to #5 and see ‘AP added device,

whether the network?’ choose ‘No’ and proceed

to Step Two.

CONNECTING TO YOUR DEVICE’S WI-FI SIGNAL

In order to first use your device and set it up,

you must first connect to its wi-fi signal.

1. Power the device on.

•If your unit is capable of being

hardwired, either insert the test

plug that came attached with it

into an outlet, or have it

9 Version 2.0

professionally hardwired into

the existing electrical system

2. Turn on your phone’s Wi-Fi and wait up

to 5 minutes for the device to generate

a Wi-Fi signal (this will match the UID

on the sticker, ex: TUTxxxxxxx)

3. Once the device generates its Wi-Fi

signal, connect to it via the Wi-Fi

settings on your phone. It should display

as ‘Connected’ or ‘Current Network’.

Note: Some devices may produce a warning

that the network has no internet access and will

ask if you want to use mobile/cellular data

instead. Choose to stay connected to the wi-fi

connection.

Note: For iOS devices, you must wait until the

Wi-Fi signal appears next to your Phone Carrier

Name at the top of your phone screen.

10 Version 2.0

4. After connecting, open the LookCamPro

App.

5. The app will automatically detect the

camera, and display an “AP added

device, whether the network?”

message. Select “Sure”.

6. The app will take you to a new screen to

select the network you wish to pair the

device with.

7. Put in the password for the desired

network and press ‘Sure’. The camera

will reboot and should come online

within 5 minutes.

•Note: Please follow the tips on

page 5 to ensure a proper

connection is formed between

your device and the router.

Note: You will be prompted to change the

device password the first time you view the

camera video feed. We suggest that you do

Inhaltsverzeichnis

Andere Mini Gadgets Sicherheitssystem Handbücher

Mini Gadgets

Mini Gadgets Surveillance Detector Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung