Minicom Remote Power Switch Bedienungsanleitung

www.minicom.com

InternationalHQ

Jerusalem,Israel

Tel:+9722535 9666

minicom@minicom.com

NorthAmericanHQ

Linden,NJ,USA

Tel:+19084862100

info.usa@minicom.com

EuropeanHQ

Dübendorf,Switzerland

Tel:+4144823 8000

info.europe@minicom.com

Technicalsupport - support@minicom.com

5UM20160 V1.1 12/05

RemotePowerSwitch

Installation Guide

INSTALLATIONGUIDE

TableofContents

1. Welcome..................................................................................................2

2. Introduction.............................................................................................3

3. RPS components......................................................................................3

4. TheRPS units...........................................................................................3

5. RackmountingtheRPS...........................................................................4

6. InstallingtheRPS....................................................................................4

7. InstallingtheSNMP Utility.......................................................................5

8. Safeshutdown.........................................................................................8

9. OperatingtheRPS..................................................................................11

10. CascadingRPS units...............................................................................11

11. Technicalspecifications.........................................................................13

©CopyrightMinicomAdvancedSystems

REMOTEPOWERSWITCH

1.Welcome

TheRemotePowerSwitchsystemisproducedbyMinicomAdvancedSystems

Limited.

Technicalprecautions

Thisequipmentgeneratesradiofrequencyenergyandifnotinstalledinaccordance

withthemanufacturer’sinstructions,maycauseradiofrequencyinterference.

ThisequipmentcomplieswithPart15,SubpartJoftheFCCrulesforaClassA

computingdevice. ThisequipmentalsocomplieswiththeClass Alimitsforradio

noiseemissionfromdigitalapparatussetoutintheRadioInterferenceRegulation

oftheCanadianDepartmentofCommunications. Theseaboverulesaredesignedto

providereasonableprotectionagainstsuchinterferencewhenoperatingthe

equipmentina commercialenvironment. If operationofthisequipmentina

residentialarea causesradiofrequencyinterference, theuser,and notMinicom

AdvancedSystemsLimited,willberesponsible.

Changesormodificationsmadetothisequipmentnotexpresslyapprovedby

MinicomAdvancedSystemsLimitedcouldvoidtheuser’sauthoritytooperatethe

equipment.

MinicomAdvancedSystemsLimitedassumesnoresponsibilityforany errorsthat

appearinthisdocument. Informationinthisdocumentissubjecttochangewithout

notice.

Nopartofthisdocumentmaybereproducedortransmittedinany formorbyany

means, electronicormechanical, forany purpose, withouttheexpress written

permissionofMinicomAdvancedSystemsLimited.

Trademarks

Alltrademarksand registeredtrademarksarethepropertyoftheirrespective

owners.

Languages

ThisInstallationGuideistranslatedintoGerman, FrenchandItalian. The

translationsappearonthesuppliedCDoronourwebsiteat

www.minicom.com underSupport/Userguides.

INSTALLATIONGUIDE

2.Introduction

TheRemotePowerSwitch(RPS)isanInternetreadydevicethatremotelycontrols

theACpowerofup to8connecteddevices, suchas:servers,routers, modemsand

telephonenetworks. Youcancascadeup to15 Slaveunitstocontrola totalof128

devicesvia a10/100 Base-TEthernetTCP/IPconnection.

Ausercanpoweron/off, rebootorsafeshutdownanyserverorhardwaredevice

thatisphysicallyconnectedtotheRPS.

3.RPS components

TheRPS systemhasthefollowingcomponents:

·RPSManager-115VACor230VACmodel

·RPS Slaves-115VACor230VACmodels(optional)

·Rack-mountbrackets

·2ACPowercords

·8Serialcables(RJ-11 -RS232 connectors). Toperformsafeshutdown.

·1RJ-11cascadecable. ForRPS cascadingorUPS connection

·2terminators

·OntheMarketing&DocumentationCDyouwillfind:

·SNMPUtility:ToconfigureanIP address and updatefirmware

·MIB:ManagementInformationBaseforSNMP

·Linux safeshutdownutility

4.TheRPS units

ThefiguresbelowillustratetheRPSManagerand Slavefrontand rearpanels. The

SlaveisthesameasRPSManagerwithouttheSNMPcard.

Cascade

RING ON

&RESET

iLINK i i i ii i

ACTION

LINK

RESET

PWR

ENVMODEM ETHERNET

A B C D E F H

1112

1314

1516

INTERNETPOWERMANAGEMENT

Environmental

Modem

RPSReset

button

LEDs action/

link/power

Ethernet

Power

LED

Remotecontrol

LED

Manual control

button

Circuit

breakerA

On/Offswitch

IDnumber of

cascaded unit

Figure1RPSManagerfrontpanel

REMOTEPOWERSWITCH

RING ON

&RESET

iLINK i i i ii i

AB C D E F H

1112

1314

1516

Figure2RPSSlavefront

INPUT DCB

INPUTHGFEDCBA

AC input

Circuit

breakerB

Poweroutput RS232 (safeshutdown)

Figure3RPSManagerandSlaverearpanel

Note:Theletteron themanualbuttonsatthefrontcorrespondstotheoutletwith

thesameletterattherear.

5.Rack mountingtheRPS

TheRPS comeswithbracketsformountingontoa standard19-inchrack.

TorackmounttheRPS:

1.Choosea locationforthebrackets. Anotchedholeontheverticalrail denotes

themiddleofa Uslot.

2.Connectthemountingbracketstotheunit, usingthescrewsprovided. See

Figure4

RING ON

&RESET

iLINK i i i ii i

ACTION

LINK

RESET

PWR

ENVMODEM ETHERNET I

A B C D E F H

1112

1314

1516

INTERNETPOWERMANAGEMENT

Connectthissectiontoside

oftheRPSusing4screws

Screwto

therack

here

Figure4Connecting themountingbrackets

6.InstallingtheRPS

YoucanconnecttheRPS toa LANusingtheEthernetconnection. Anotheroption

istoconnectanexternalmodemtothebuilt-inRS 232portforInternetdialup.

Oncesetup, theadministratorcanpowerthedevicesonandoff via aWebbrowser.

Connecting theRPS

1.Connectthepowercordsocketsofthecomputersand otherdevicestothe

OutputportsoftheRPS.

INSTALLATIONGUIDE

2.ConnectthesocketofanyUninterruptiblePowerSupply(UPS)totheInput

portsoftheRPS, orconnecttheRPS tothepowersupplyusingthepowercord.

3.ConnectanEthernetcabletoEthernetportoftheRPS –seeFigure5.

4.Pluga TerminatorintooneoftheiLINK ports.

5.Whereyouhaveanenvironmentalsensor, connectthesensor’sconnectortothe

ENVportontheRPS Manager.

Connection diagram

ThefigurebelowillustratesthebasicRPS connections.

Figure5RPSconnectiondiagram

7.InstallingtheSNMPUtility

AssignanIP address fortheRPS using theSNMP Utility.

1.InstalltheSNMP Utilitylocatedon theCDontoa Windowsbasedcomputer.

2.ClickStart/Programs/SNMP Utility. TheSNMP Utilityappears,seeFigure6.

REMOTEPOWERSWITCH

Figure6SNMPUtility

NetworkSelection

SNMPUtilityautomaticallysearchesforthecomputer’snetworkadapter.

1.Fromthemenu click NetworkSelection. TheNetworkAdapterboxappears,

seeFigure7.

2.ChoosethenetworkadapterthatconnectsyourcomputertotheLAN.

3.Click OK.TheMainwindowreappears.SNMP Utilitysearchesforall RPS on

thesameLANanddisplaysall RPSavailable.

Figure7NetworkAdapterbox

Configure

YoumustconfigureanIPaddress fortheRPSWebinterface.

1.ClickoneofthedisplayedRPS and click Configure ordouble-clicktheRPS

directly. TheIP Address pageappears,seeFigure8.

2.SettheIP address;subnetmask;and gatewaymanuallyoruseDHCPor

BOOTP.

INSTALLATIONGUIDE

Figure8IPaddressforRPS

Advancedtab

Clickthe Advanced tab.Figure9appears.

Figure9Advancedtab

SNMPUtilityprovidesthefollowingsecurityfeatures.

SNMPUtilityPassword

Byinputting a password, firmwareupdatestoRPS bytheSNMP Utilitywill

requirea password.

Note!If youlosethepassword, youwillnotbeabletoupdatetheRPS firmware.

REMOTEPOWERSWITCH

ManagementProtocol

YoucanmanagetheRPS through theWebora Telnetapplication. Forsecurity

reasonswerecommend thatyouchangethedefaultportnumbers.

Typea newportnumber.ThefullAddress mustthenbeenteredtoaccess via the

WeborTelnet. Forexample:

FortheHTTPportnumbertype81.TheURLis http://192.168.0.177:81.

FortheTelnetportnumbertype24.TheTelnetaddressis192.168.0.17724.

Downloadfirmware -discussedintheOperatingGuide.

Refreshbutton

Whenyouadd a newRPStothenetwork, press Refresh torescanthenetwork. The

newRPS appears.

8.Safeshutdown

Toperformsafeshutdownvia theRPS, connecttheSerialcabletothedesired

computerasfollows:

1.ConnecttheRJ11 connectortotheappropriateRS232porton therearofthe

RPS. SeeFigure3above. Forexample, ifthecomputerisconnectedtopower

outletD, connecttheRJ11 connectortotheRS232 Dport.

2.ConnecttheRS232 connectortothecomputer’sSerialport.

SafeshutdownforLinux

Usethefollowinginstructiontosetup safeshutdownforLinux.

1.Decompress theRPS1Linux.tar.gz(found ontheCD).

2.RunSetup.

3.SelecttheSerialporttowhichtheRS232 cableisconnected.

SafeshutdownforWindows

ConfiguretheUPS serviceasfollow:

1.SelectStart/Settings/ControlPanel. TheControlPanelappears.

2.Double-clicktheAdministrativeToolsicon. TheAdministrativeToolsappear.

3.Double-clicktheServicesicon. TheServiceswindowappearsseeFigure10.

INSTALLATIONGUIDE

Figure10 Serviceswindow

4.Double-clickUninterruptiblePowerSupply(UPS).TheUPS propertiesbox

appears.

Figure11 UPS properties box

5.FromtheStartuptypeDrop-downmenu, selectAutomatic.

6.Clickthe Log On tab,Figure12 appears.

Figure12 UPS properties box

7.Check Thisaccount andinputtheappropriateaccountinformation.

Inhaltsverzeichnis

Andere Minicom Schalten Handbücher

Minicom

Minicom PX Bedienungsanleitung

Minicom

Minicom DX System Bedienungsanleitung

Minicom

Minicom 0SU70050 Bedienungsanleitung

Minicom

Minicom Smart CAT5 Bedienungsanleitung

Minicom

Minicom DX System Bedienungsanleitung

Minicom

Minicom 0SU70017 Bedienungsanleitung

Minicom

Minicom Smart 4 Bedienungsanleitung

Minicom

Minicom Smart CAT5 Switch 16 IP Bedienungsanleitung

Minicom

Minicom Minicom Smart 216 Bedienungsanleitung

Minicom

Minicom 0SU70033 Bedienungsanleitung

Minicom

Minicom Minicom Smart 216 Bedienungsanleitung

Minicom

Minicom Smart CAT5 Switch 16 IP Bedienungsanleitung

Minicom

Minicom 5UM60000 Bedienungsanleitung

Minicom

Minicom PHANTOM MX IP Bedienungsanleitung

Minicom

Minicom RJ-45 Bedienungsanleitung

Minicom

Minicom Minicom Smart 216 Bedienungsanleitung

Minicom

Minicom 5UM20114 Bedienungsanleitung

Minicom

Minicom Supervisor MU Bedienungsanleitung

Minicom

Minicom Smart CAT5 Switch 16 IP Bedienungsanleitung

Minicom

Minicom 1SU70017 Bedienungsanleitung

Minicom

Minicom Smart CAT5 Bedienungsanleitung

Minicom

Minicom 0SU70050 Bedienungsanleitung

Minicom

Minicom Minicom Supervisor Phantom Bedienungsanleitung

Minicom

Minicom Smart IP Access Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung