Minleon Multifunction Mini Controller Bedienungsanleitung
pg. 1
Instruction Manual
pg. 2
MINLEON MULTIFUNCTION
MINI CONTROLLER SYSTEM
INSTRUCTION MANUAL
MINLEON LIGHTING
2nd Release –January 2014
Important Notice
It is the sole responsibility of the reader to ensure that all safety precautions are taken, Minleon and/or any involved parties
relinquishes any responsibility and liabilities for any content within this manual that may cause the reader any injury or loss of property
due to incorrect use. By reading this manual you take sole responsibility for all actions taken.
Ensure all local and state electrical laws are taken into consideration when using this product. Minleon do not take responsibility for
any use outside of state and local laws and regulations.
Any misuse, abuse, tampering or modification of the product will void any and all warranties
Minleon reserve the right to change product features to help improve the product, these changes may not be represented in the
manual or may slightly vary from described. Minleon will make every effort to ensure that the information is correct as possible within
the manual.
This document is owned by Minleon USA and any use of the information and drawings within this manual must have permission by the
owner before using.
© Copyright 2013 Minleon USA
Minleon Australia & New Zealand
http://www.minleonausnz.com
Sales@MinleonAUSNZ.com
Minleon USA
http://www.minleonUSA.com
MinleonUSA@live.com
Minleon International
http://www.minleon.com
info@minleon.com
pg. 3
TABLE OF CONTENTS
Precautions and Installation Requirements 5
Introduction 6
Features 6
Uses 6
Parts and Connection 7
Outdoor Installation 8
Using the Controllers Functions 9
Multifunction Mini Controller 9
Multifunction Mini Controller Remote 10
Remote Controller Functions 10
Turning lights on and off 10
Setting the number of lights connected to the controller 10
Selecting Effects Colors 10
Replacing Batteries on the Remote 11
Connecting Additional Lights 12
Connecting Lights 12
Power Considerations 12
Methods of Connecting Addition Power 12
How to Connect Additional Minleon RGB Lights 13
Connecting Lights Using the One Power Supply 13
Connecting Lights Using Additional Power Supplies 13
Fault Diagnosis 14
Connection Options 15
1: Single String 15
2: Second String 15
3: Multiple Strings & Power 15
4: Multiple Strings 16
5: Connecting thousands of Lights using the Optional T-Way 16
6: Strings Connected Through the Data Extenders 17
7: Strings Connected Through the 16 Port Signal Amplifier 17
Controlling the Mini Controller from a Computer 18
Introduction 18
Connecting to a Computer 18
Installing the Mini Controllers Drivers 19
Specifications 19
Minleon Accessories 20
Minleon RGB Lights 23
pg. 4
VERY IMPORTANT INFORMATION
BEFORE STARTING
WHEN CONNECTING AND
DISCONNECTING LIGHTS TO THE
CONTROLLER THE USER MUST ENSURE
THAT POWER IS DISCONNECTED
FROM THE CONTROLLER OR
PERMANENT DAMAGE MAY OCCUR
TO THE LIGHTS AND/OR CONTROLLER
THAT MAY NOT BE COVERED BY
WARRANTY
pg. 5
PRECAUTIONS & INSTALLATION
REQUIREMENTS
IMPORTANT - READ BEFORE USE
1. If using outside then ensure that the controller is mounted from the mounting eye
piece with the power and USB sockets facing downwards and caps in place on the
USB port if not used.
2. The controller must not be located no more than 20 feet away from the first light
unless using the Minleon sender and receiver unit (Minleon additional accessory)
which will allow up to 300 feet of distance between the controller and first light.
3. Never disconnect and connect lights when the controller is powered up as this may
cause permanent damage to the lights and/or controller.
4. Do not place lights or controller in areas where there is extreme heat or cold.
5. Do not strain the cables of the lights as damage may occur to the wiring.
6. Always keep the plug cap on at the end of the light string when not used.
7. Firmly tighten all plugs, do not over tighten
8. Do not drop controller, remote or lighting on hard surfaces
9. Do not use if there is any damage to the controller, wiring or lighting
10.Do not use detergents on the controller, remote or lights as this may cause
permanent damage. Use a soft clean rag to clean the controller, remote and lights.
11.The Minleon Multifunction Mini Controller is supplied with a standard 1.5 amp
12VDC power supply that is rated to work with the number of lights supplied in this
Kit. If connecting more lights then always ensure that the correct type of power
supply is connected (12 Volt DC) and ensure that the power supply is rated for the
number of lights connected. The power supply must be able to supply about 30ma
per attached light. So for 100 Minleon RGB LED lights (0.03 amps x 100 Minleon RGB
lights) you would require a minimum rated 3 amp 12VDC power supply (Minleon
additional accessory)
12.The power input jack does not have reverse-polarity protection. Connecting power
backwards will instantly and permanently damage the lights and controller. The
CENTER pin is POSITIVE, the OUTER ring is NEGATIVE
pg. 6
INTRODUCTION
The Minleon Multifunction Mini Controller is a simple to use powerful RGB light controller
used for displaying effects on a single string of Minleon RGB Lights (up to 500 lights
maximum). It can also control multiple strings of lights using Minleon accessories that allow
for thousands of lights to be connected. The Mini Controller has a number of built-in
effects, a remote control that allows different controls including a memory recall and a USB
port that allows live control via a PC using Minleons LightShow Pro software.
Features
Controls all the Minleon RGB Light series (refer to a Minleon RGB section)
Connect up to 500 individually controlled lights to one controller or thousands of
lights if grouping lights using additional Minleon accessories.
Full remote control functions with memory recall buttons
Over 20 different amazing colorful effects with multiple variations per effect.
Easy setup and use –Plug and Play
Low voltage (12VDC)
Select your own favourite colors using the remote control with Effects
Remembers the last effect used after powering off the controller
Can be connected to Minleons LightShow Pro sequencing software to gain full control
of your lights via the computer
Easy setup of number of lights connected to the controller
Uses
Seasonal celebrations (Christmas, Easter, Valentine, Independence day, St Patricks
day, Halloween, Thanks Giving, and any other seasonal occasion)
Take your Christmas tree to the next level with amazing colourful effects.
Special events (Birthdays, 21st , Weddings, Engagements, Anniversaries, etc.)
Scenery Lighting (Gardens, Trees, Parks, Buildings, Halls, Rooms, etc.)
Sporting Events, select your teams favourite colours
Can be used for Shops, Restaurants, Cafes, Bistros, Event centres, Hotels etc. to
create any effect and ambience.
Mobile installations (Cars, Trucks, Caravans, Boats, Bikes, Clothing, etc.)
Bring attention to your business by using the great inbuilt light effects.
Any other use or occasion that you can think of. The uses are unlimited
pg. 7
PARTS AND CONNECTION
1: Multifunction Mini Controller
The Minleon Multifunction Mini Controller has many inbuilt functions
and is very powerful for a small package
2: Mini Controller Remote
The Minleon Multifunction Mini Controller Remote is a 12 key remote
that allows you to take control of the lights connected to the
multifunction mini controller in many ways
3: Mini Controller 12VDC Power Supply
12VDC 1.5 Amp power supply that can power up to 50 Minleon RGB
lights and the controller. (Some kits may come with an outdoor power supply)
4: Minleon RGB Lights
A variety of different lights, tubes and strip Lighting are available from
Minleon Always power off the controller before connecting and disconnecting lights
1
2
3
4
Diagram for connecting the power supply and lights
*Optional Extension/spacer shown (may come with an outdoor power supply)
pg. 8
OUTDOOR INSTALLATION
When mounting the controller outside then ensure the controller is mounted from the hook
eye with the power socket and USB port facing downward and the cap in place on the USB
port if this is not being used.
The 12Vdc power supply MUST be
plugged into a safe weatherproof
location. DO NOT connect the power
supply to mains outlets that are
exposed to the elements.
Note: Some units may be shipped with
a 1.5amp all weather power supply
Hook Eye –Use the hook eye to
hang the for best installation.
The power socket and USB port
must be pointing down when
installed outdoors and the USB cap
in place if not being used.
Ensure the light output cable
does not pull the controller to
the side and allow the power
socket and USB port to be
exposed to water.
The controller should be facing
downwards as shown here
Top
Bottom
pg. 9
Play Button
Plays next effect. If held down, turns
power off and saves effect for next
power up. Press to turn lights back on.
12Volt DC Power Socket
Connect the 12VDC power supply here
Light Plug
Connect the lights to this 3 pin plug. Ensure the pins
line up and do not force in the plug.
IMPORTANT -DO NOT CONNECT & DISCONNECT
LIGHTS WHEN CONTROLLER IS PLUGGED INTO
POWER
Speed Button
Adjusts speed of effects through 10
levels
Mini Controller Control
The multifunction mini controller can have basic
control from the controller by using the below
function buttons.
Multifunction Mini Controller
The Minleon Multifunction mini controller has
several basic and advanced functions that allow the
user to take full control of the lights connected
USB Port
The USB port allows the mini controller to be
connected to a computer for direct control via
Minleons LightShow Pro Software or to modify the
controllers effects. Ensure the supplied USB cover is
in place if not being used.
USING THE CONTROLLER FUNCTIONS
pg. 10
Multifunction Mini Controller Remote
The Minleon Multifunction Mini Controller Remote is a 12 key remote that has several basic and
advanced features that allow you to take full control of your lights for any occasion by just using
the Multifunction Mini Controller Remote.
Remote Controller Functions
Turning lights on and off
Press the button
Setting the number of lights connected to the Controller
Turn the lights on then hold the button for more than 1 second. All active lights
will turn on Red with the last active light flashing blue.
Press Bto decrease the number of lights connected.
Press Mto increase the number of lights connected.
Press to return to normal operation
! - on/off
C1 - select color #1 (press-and-hold to scroll thru the color wheel)
C2 - select color #2 (press-and-hold to scroll thru the color wheel)
C3 - select color #3 (press-and-hold to scroll thru the color wheel)
E1 - select effect #1 (solid)
E2 - select effect #2 (twinkle)
E3 - select effect #3 (fading-in-and-out)
E4 - select effect #4 (chasing)
E5 - select effect #5 ('lightshow', using all the colors (this selection
overrides the above color selections)
S - select speed (slow, medium, fast)
B - select brightness (bright, dim, dimmer)
M - save to memory favourite sequence (long hold retains/short press
recalls)
Inhaltsverzeichnis
Andere Minleon Controller Handbücher
