MINOLTA-QMS QMS Bedienungsanleitung

Crown Document

Option Commands

1800216-001J

Trademarks

The following are trademarks or registered trademarks of their respective owners. Other

product names mentioned in this manual may also be trademarks or registered trademarks of

their respective owners. Registered trademarks are registered in the United States Patent and

Trademark Office; some trademarks may also be registered in other countries. The MINOLTA-

QMS logo, Crown, and the Crown logo are registered trademarks of MINOLTA-QMS, Inc., and

PS Executive Series is a trademark of MINOLTA-QMS, Inc. PostScript is a trademark of Adobe

Systems Incorporated for a page description language and may be registered in certain

jurisdictions. Throughout this manual, “PostScript Level 2” is used to refer to a set of

capabilities defined by Adobe Systems for its PostScript Level 2 page description language.

These capabilities, among others, are implemented in this product through a MINOLTA-QMS-

developed emulation that is compatible with Adobe's PostScript Level 2 language. Adobe/

Adobe Systems Incorporated. 3Com, 3+Open/3Com Corporation. Aldus, Aldus PageMaker,

Aldus FreeHand/Aldus Corporation. Apple, AppleTalk, EtherTalk, LaserWriter, LocalTalk,

Macintosh, TrueType/Apple Computer, Inc. VINES/Banyan. CompuServe /H & R Block. DEC,

DECnet, VMS/Digital Equipment Corporation. PhoneNET/Farallon Computing, Inc. Hewlett-

Packard, HP, PCL, HP-GL, LaserJet/Hewlett-Packard Co. IBM PC, Token-Ring/International

Business Machines Corporation. Intel/Intel Corporation. Microsoft, MS-DOS/Microsoft

Corporation. Novell and NetWare/Novell, Inc. QuarkXPress/Quark, Inc. TOPS/Sun

Microsystems, Inc. UNIX/UNIX Systems Laboratories.

Proprietary Statement

displayed, transferred, or copied in any form or in any manner or on any media, in whole or in

part, without the express written permission of MINOLTA-QMS, Inc.

to any other media or language, without the express written permission of MINOLTA-QMS, Inc.

Products Covered by this Manual

This manual describes Document Option Commands(DOCs) that are used on a variety of

Crown printers. Therefore, not all Document Option Commands and not all printer features

discussed herein necessarily apply to any one printer.

Refer to your printer documentation for a list of DOCs that are supported on your printer, then

use this manual for information about the commands.



Contents

Document Option Commands ............................................................................5

Introduction 6

Printer Compatibility 6

Emulation Sensing Processor (ESP) 7

Using DOCs 7

DOC Statement Syntax 8

Accessing Printer Features 11

Sample DOC Prologue 13

Command Summary 15

Header and Trailer Pages ....................................................................................19

Introduction 20

Chapter Organization 20

DOC Statement Syntax 21

Printing Header Pages 22

Printing Trailer Pages 25

Header/Trailer Information Commands 27

Document Control Commands 30

Sample Prologue 32

Selecting Printer Features ...................................................................................35

Introduction 36

Printer Compatibility 36

Chapter Organization 37

DOC Statement Syntax 38

Printing Commands 39

Paper Handling Commands 43

Page Layout Commands 46

Sessions 72

Emulation Command 80

Printer Resolution, Quality, and Color Commands 80

Selecting Emulation Features .............................................................................83

Introduction 84

Chapter Organization 86

DOC Statement Syntax 87

HP-GL Emulation Commands 88

HP PCL4 Emulation Commands 91

HP PCL5 Emulation Commands 93

HP-PCL 5e or 5c Emulation 98

PostScript Emulation Commands 111

LN03 Plus Emulation Commands 111

PostScript Level Commands 113

Lineprinter Emulation Commands 114

CCITT Group 3 and 4 118

CALS 122

TIFF 123

Bin Assignments .................................................................................................125

Printer Bin Assignments 126



Document Option

Commands

Document Option Commands6

Introduction

MINOLTA-QMS printers offer a wide range of features for designing and printing

documents. Applications and printer emulations (such as PostScript, HP-GL, HP PCL)

differ in their ability to access some of the printer’s features. The Document Option

Commands (DOC) provide a way to access printer features that are not accessible by your

application or the printer emulation.

Document Option Commands provide a quick and convenient way to access printer

features. By using Document Option Commands instead of individual printer language

commands, one driver can support all languages or emulations used by the printer.

If you are a system administrator, use your host network software to create customized

queues for all users connected to the printer. Use Document Option Commands to

generate personalized header pages or to activate special printer features for each user.

Characteristics of DOCs

Job related

Document Option Commands are relevant to the formatting of documents.

Human readable

No special programming skills are necessary to use Document Option Commands.

Emulation transparent

Document Option Commands are recognized, interpreted, and stripped from the

data stream before the print job is interpreted by the emulation.

Printer Compatibility

Printer features vary on each printer. For example, some of our printers may have a

built-in stapler. Document Option Commands designed to access stapler features would

not work on a printer that does not have a stapler. The purpose of this manual is to provide

an overall context for Document Option Commands used with any printer. Refer to your

printer documentation for a list of Document Option Commands supported and new

Document Option Commands designed to use the particular features of your printer. Refer

to this manual for general examples of how to use Document Option Commands.

Document Option Commands 7

Emulation Sensing Processor (ESP)

Using a form of artificial intelligence, ESP technology analyzes incoming file data from

any of the printer’s interfaces. ESP technology selects the appropriate printer language

from those installed on the printer and processes the print job, freeing the user from the

need to change printer switch settings or send software commands to accommodate

different printer emulations.

Using DOCs

When using Document Option Commands, the print job consists of a DOC prologue

attached to the emulation page descriptions. The prologue consists of text statements that

provide information for the header and trailer pages, and Document Option Commands

that specify how the job is to be processed and printed.

Examples

All DOC prologues begin with %! symbols on the first line. Each DOC statement begins

with two percent signs (%%) as the first characters on a line. Next, a unique keyword

follows with any optional arguments to the next line. Each line is limited to 255

characters. Spaces in the DOC statement are allowed only between keywords and

arguments.

DOC Statement Example

%%IncludeFeature: duplex(on)

Argument

Unique Keyword

Double Percent Signs

Argument Attribute

Document Option Commands8

DOC Prologue Example

%%Title: A Sample Document for the printer

%%For: Corporate Communications

%%Date: 08/21/00 12:30:00

%%IncludeFeature: duplex(on)

%%End Comments

Actual text of print job...

Note that alphabetic case is important for keywords. Use the following rules for all

keywords.

All keywords are lowercase except for the first letter of each “word.” For example:

%%Title; %%IncludeFeature.

All arguments are lowercase except where specified.

DOC Statement Syntax

Document Option Commands have the following syntax:

 Mixed case commands must be typed exactly as shown.

Syntax Indicator Keyword

parameters

Indicator An indicator that a Document Option Statement follows. Indicators are %%.

Keyword The command name. Typical examples of indicators and keywords are

%%Title:

%%CreationDate:

%%IncludeFeature:

%%EndComments

Argument Lowercase command that causes action to occur with the print job or printer

function.

Attributes Attributes specify settings for the command. For example, the paper size

attribute of the %%IncludeFeature: input command specifies the paper size

that is to be used for the print job:

%%IncludeFeature: input (letter)

Document Option Commands 9

Syntax Conventions

Example

%%IncludeFeature: orientation (<rotation>)

<rotation> ::== Portrait | Landscape | portrait | land-

scape

 Unless noted, all parameters not shown in bold or within < > or { }, must be typed

exactly as shown in the syntax.

 Mixed case commands must be typed exactly as shown.

About the DOC Prologue

The DOC prologue is attached to the beginning of a print job either by the person who is

sending the job to the printer, or by a host system print queue. The following rules apply to

DOC prologues:

Every DOC prologue must begin with a single “comment line.” (Comment lines begin

with %! and include all subsequent characters up to the first newline character

encountered.) If a comment line is not on line 1 of the prologue, the printer (or host

software) assumes that no prologue is in the current print job. (If you have subsequent

lines containing valid Document Option Commands, the commands may be ignored

or cause unpredictable results.)

(...) Parentheses are explicit separators that must be entered as shown in the com-

mand syntax. One space (hex 20) is recommended for separation before and

after the parentheses.

< ...> Attributes or values within < > brackets are optional variables. Do not include the

brackets.

[...] Items within square brackets are optional variables.

{...} Parameters or values within curly braces may be repeated one or more times.

Do not include the braces.

::== logical equate symbol

| logical OR function

Spacing Spacing may be used to separate multiple commands and/or arguments on a

single line.

Document Option Commands10

All DOC statements are specified by two percent signs (%%) as the first characters on

a line. The statements consist of a unique keyword and any optional arguments up to

the next newline (linefeed). Use space characters only for the separation of keywords

and arguments. Do not use a space to separate the %% characters from the keywords

or at the beginning of a line. Keywords are case sensitive; type them exactly as shown

in this manual.

All Document Option Commands for a print job must appear in the prologue at the

beginning of the job and must follow one another. The prologue terminates when the

system recognizes a line that does not begin with %% or when it encounters the

%%EndComments command.

When a Document Option Command is used more than once in a print job, the first

instance takes precedence. When multiple files, each beginning with their own Docu-

ment Option Commands, are concatenated together as a single print job, only the com-

mands listed first take effect unless a newlayout command is also included in the print

job. Note that a newlayout command can be used at the beginning of a subjob. Sub-

jobs can be delimited by the %%Session command or by emulation specific job ter-

minators. The newlayout command must be included with each set of Document

Option Commands that you want to be evaluated and used. For more information, see

Chapter 3, “Selecting Printer Features” .

When different Document Option Commands set conflicting attributes for print jobs,

the first command takes precedence.

You may place comment lines (%!) anywhere in the prologue. The printer ignores all

comment lines.

Printing attributes that are not specified by Document Option Commands are determined

by printer default settings.

Unrecognized or unsupported Document Option Commands are ignored. Unrecognized or

invalid arguments to Document Option Commands are also ignored.

DOC Statement Line Constraints

The statement lines have constraints concerning line length and line endings:

Statements (on a single line) must be less than or equal to 255 characters in length,

excluding line termination characters.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MINOLTA-QMS Software Handbücher

MINOLTA-QMS

MINOLTA-QMS ImageServer Bedienungsanleitung

MINOLTA-QMS

MINOLTA-QMS PageScope Kurzanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung