Minolta CD-10 Bedienungsanleitung
Preface
Precautions
Table of Contents
Product Outline
Accessories
Names of Parts
Connecting with a Computer
Basic Operations
Using the PC Card Drive
CD-10 with a Macintosh
Using the PC Card Drive CD-10
with IBM PC/AT Compatibles
Troubleshooting
Specifications
E INSTRUCTION MANUAL
1
Getting Started
Preface
Thank you very much for purchasing the Minolta PCMCIA Card
Drive CD-10.
The Minolta PCMCIA Card Drive CD-10 can be connected to
various makes of personal computers to read and write PC cards
(PCMCIA/JEIDA specifications) and PC card adapter sets like the
Minolta RM-2S/RM-4S SmartMedia™ image memory cards used
with the Minolta CA-1S PC card adapter. The data recorded on a PC
card with a digital still camera can be directly read into a personal
computer. Please read these instructions carefully before use.
The features of this product include:
• SCSI interface, the standard interface for personal computers.
• Of the standard PCMCIA/JEIDA cards, ATA cards and SRAM cards canbe
used.
• Can be connected to Macintosh, IBM PC/AT compatible computers, NEC PC-
98 series, UNIX, VMS,AIX, etc.
• There is one slot ,which can be used for inserting type I, II and III PC cards.
* MS-DOS is the registered trademark of Microsoft.
*Apple and Macintosh are the registered trademarks of Apple Computer, Inc.
*IBM PC/AT is the trademark of International Business Machines Corporation.
*EZ-SCSI is the trademark ofAdaptec, Inc.
*PhotoDeluxe is the registered trade mark of Adobe Systems, Inc.
* SmartMedia is the registered trademark of Toshiba Inc.
*Other company names and product names are the trademarks and registered trademarks of their
respective companies.
1. We have taken every necessary precaution to ensure the accuracy of this
product and this manual. However, we can not be held responsible for the results
of operation.
2. The product and the manual are subject to improvements without notice.
3. This manual may not be reproduced in whole or in part without our prior
permission.
2
Precautions
Safety Precautions and handling
Power cord
- Do not bend the power cord excessively or place heavy objects on
it. Damage to the cord may cause fire or electric shock.
- Do not pull the cord itself tounplug;always hold theplug and pull.
- Do not plug or unplug with wet hands.
- Unplug from the outlet when you are not using the unit for long
periods.
- Plug the power cord directly into a wall outlet whenever possible.
Use of extensioncords andpowerdividers cancause malfunctions.
- Do not use an outlet to which large electrical appliances such as
air conditioners and copy machines are connected.
To prevent electric shock
Never remove the cabinet of this unit. Some components inside
operate at high voltages and can cause severe electric shock if
touched.
Keep objects and materials out of the unit
Make sure that no liquid is spilled or leaks into this unit and that
no metal or inflammable objects fall inside since these can cause
fire, shock, malfunctions, or accidents.
In case of accident or malfunction
If the unit makes unusual noises or begins smoking, or if a for-
eign object gets inside the unit, unplug the power cord from the
outlet and contact thestore from which you purchased the unit or a
nearby service center.
This symbol means "WARNING" and indicates caution should be used.
Please read and understand each warning message thoroughly before
operating this equipment. Failure to follow warning messages may
result in serious injury, fire, or equipment damage.
3
Getting Started
Power source
Use a standard domestic household power supply (100 to 240V,
50/60Hz).
Proper places for use and storage
- This unit is to be used at temperatures between +5°C and +40°C
and at relative humiditiesbetween 20% and 80% (no condensation).
- Do not use or store the unit in an excessively hot or cold place.
- Do not use or store the unit in a dusty place or in direct sunlight.
- Do not use or store the unit in a place subject to excessive vibra-
tion or in an unstable place.
- Do not place the unit close to a system which generates strong
magnetic fields(motor,transformer, television, loudspeaker, mag-
net etc.).
- Do not obstruct vents, it may cause the internal temperature to
rise. Do not stack the units. Do not use in a non ventilated area.
Precautions for connection
When connecting this unit to a personal computer or any other
equipment, always first turn off the main power of the equipment
to be connected.
Precautions for transportation
- Disconnect cables and remove the PC card before transporting
the unit.
- Use the cardboard box in which the unit was initially packed.
- This is a precision device. Do not subject to excessive shock or
vibration.
Maintenance of the cabinet
- Do not use thinner, benzene, insecticide and other volatile
substances to cleanthe cabinet.
- Clean the cabinet and front panel with a soft cloth. Remove dirt
with a soft cloth moistened with a small amount of neutral deter-
gent diluted with water. Wipe dry after cleaning.
- Disconnect the power plug from the outlet before performing any
maintenance on the unit.
4
FCC Radio Frequency Interference Warning
Notice for customers in U.S.A
This equipment generates and uses radio frequency energy, and if
not installed and used in strict accordance with the manufacturer’s
instructions, can cause interference to radio and television reception.
This equipment has been certified and found to comply with the
limits for a Class B computing device in accordance with the specifi-
cations in Subpart J of Part 15 of the FCC rules, which are designed
to provide reasonable protection against such interference in a com-
mercial installation.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the in-
terference by one or more of the following measures:
1. Reorient the receiving antenna.
2. Reorient the computer with respect to the receiver.
3. Move the computer further away from the receiver.
4. Plug the computer or receiver into a different outlet so computer
and receiver are on different branch power circuits.
5. Ensure that card mounting screws, attachment connector screws,
and ground wires are tightly secured.
If necessary, the user should consult with the dealer or an
experienced radio/television technician for additional suggestions.
The user might find the following booklet helpful, prepared by the
Federal Communications Commission: How to Identify and Resolve
Radio TV Interference Problems. It is available from the U.S.
Government Printing Office, Washington, DC 20492, Stock No.
004-000-00345-4 (FCC Part No. 15.838b)
Notice for customers in Canada
This apparatus complies with the Class B limits for radio noise
emissions set out in Radio Interference Regulations.
This mark cortifies this product meet the requirements of the
EU(European Union) concerning interference causing equipment regularions.
CE stands for Conformité Européemme (European Conformity).
5
Getting Started
PC Cards
Most PC cards compatible with PCMCIA/JEIDA standard specifi-
cations (ATA cards and SRAM cards) can be used.A variety of prod-
ucts are compatible with the PCMCIA/JEIDA specification, but the
specifications are ambiguous and certain rules allow a large latitude.
As a result, some PC cards may not conform with the read/write
hardware and driver software. If you have questions about the com-
patibility of specific brands, please contact us with the card type,
manufacturer, and card specifications. Special driver requirements
may be necessary for Linear Flash, AIMS, and other PC cards. Be-
fore using a PC card, first read the instructions for the card.
All unformatted PC cards should be formatted in the camera with
which they are used.
When using the Minolta RD-175 digital camera to format cards,
erase all of the data on the card before formatting it.
PC Card Adapter Sets
In this manual, all of the examples are shown using the Minolta PC
CA-1S card adapter with the Minolta RM-2S/RM-4S SmartMedia
image memory card.
Digital Cameras
The Minolta PCMCIA Card Drive CD-10 is compatible with flash/
ATA, hard drives, and SRAM. However, all cards must be DOS for-
matted.
6
TABLE OF CONTENTS
Preface 1
Precautions 2
TABLE OF CONTENTS 6
1. Product Outline 7
Using with Macintosh computers 7
Using with IBM PC/AT compatible computers 7
2.Accessories 8
3. Names of Parts 9
4. Connecting with a Computer 11
Using without other SCSI devices 11
Using with other SCSI devices 12
Setting the SCSI ID 13
Turning on the power 14
5. Basic Operations 15
Inserting the PC card 15
Removing the PC card 17
6. Using with a Macintosh 19
Functions of Mac-PC Manager Lite 19
Installation procedure for Mac-PC Manager Lite 20
7. Using with IBM PC/AT Compatible Computers 21
Replacing the ASPIDISK.SYS driver 23
8. Troubleshooting 24
Macintosh Systems 24
IBM PC/AT Systems 25
For more information 26
9. Specifications 27
7
Getting Started
1. Product Outline
This PC card drive is designed to be connected to a personal com-
puter to read and write PC cards (ATA cards and SRAM cards). A
SCSI interface is used to enable the device to be connected to a Ma-
cintosh, IBM PC/AT compatible, and various other personal comput-
ers.
1-1 Using with Macintosh computers
Connect the card drive to the SCSI port, the standard Macintosh in-
terface. Use the enclosed MAC-PC Manager Lite driver software as
an option to mount removable media such as PC cards.
1-2 Using with Windows 95 and IBM PC/AT
compatible computers
Connect the card drive to theAdaptec SCSI board.
For Windows 3.1, use theAdaptec EZ-SCSI driver software provided
with the SCSI board. ASPIDISK.SYS (included in this package) is
available as an option for use as one of the EZ-SCSI drivers.
Windows 95 has its own driver software, therefore, EZ-SCSI or
other driver software is not needed.
8
2. Accessories
The PCMCIA Card Drive CD-10 package contains the following
items:
PCMCIA Card Drive CD-10
LOCK
ACCESS
POWER
Mac-PC Manager™ Lite
Contains Mac-PC Manager Lite, a
software driver for connection with a
Macintosh computer.
PCMCIA Card Drive CD-10
User's Manual (this manual)
AC Adapter
Screwdriver to change
SCSI ID address
ASPIDISK floppy disk
Contains ASPIDISK.SYS, a
software driver for connection with
an IBM/PC compatible computer.
SCSI Cable
(D-Sub25 pin to 50-pin Full-pitch)
Inhaltsverzeichnis
Beliebte Kartenleser Handbücher anderer Marken
Rosslare
Rosslare DR-6255 Bedienungsanleitung
Lindy
Lindy 51541 Bedienungsanleitung
Diapro T?bbi Ürünler
Diapro T?bbi Ürünler Across System Bedienungsanleitung
Johnson Controls
Johnson Controls Kantech tyco ioSmart Bedienungsanleitung
ACS
ACS ACR122L Bedienungsanleitung
Secukey
Secukey S2-MF Bedienungsanleitung
