LAYOUT
5
Figure 6
Figure 7 Figure 8
Repeat mode :
Press [ +/– ] to select “Repeat Mode”, press [ ] to enter
the Repeat mode submenu (figure 6), press [ +/– ] to select
Repeat One / Repeat All / Normal / Random.
Segment [ A-B ] Repeat: when in playing mode, press
[ REC ] to set the start point A, “ ” will be displayed.
Press [ REC ] again to set the end point B, then “ ” is
shown. Press [ REC ] again to cancel loop repeating.
How to use loop repeating
b)
EQ mode :
Press [ +/– ] to select “EQ Mode”, press [ ] to enter the
EQ mode submenu (figure 7 and 8), press [ +/– ] to select
Normal / Rock / Bass / Classic / Pop / Live / Customize EQ.
Shortcuts :
In the play mode, press and hold [ EQ ] to change
the repeat mode: Repeat one , Repeat all ,
Normal , Random .
Press [ EQ ] to change the EQ mode: Normal ,
Rock , Bass , Classic , Pop , Live ,
Customized EQ .
Synchronized lyric display :
when playing a song (MP3/WMA format), the LRC file,
which has the same file name and in a same folder as the song
being played, will be displayed. Up to 24 characters can be
simultaneously displayed at a time (figure 3).
2.Recording
This unit support FM recording, voice recording (built-in
microphone), and direct recording (Line In). The recording
time varies with the selected sound quality and the size of the
available memory.
In the main menu, press [ ] or [ +/– ] to select
“Recording” (Figure 9). Press [ ] to select and enter
recording submenu (figure 10). There are three options: Start
recording, select source and set up.
Figure 10Figure 9
Press [ +/– ] to select “Start Recording” and press [ ]
to enter the recording submenu. When in recording
mode, a working gear icon is displayed (figure 11). Press
[ ] to pause recording and the gear icon becomes idle.
Press [ ] to resume recording. Press [ ESC / ] to
stop recording and the system will automatically save the
recorded file in the system directory. If the recording time
is less than 2 seconds, press [ ESC / ] , an error message
is displayed (figure 12) and the recorded file is discarded.
Start recording
a)
Figure 12Figure 11
When not in play mode or recording mode, press and
hold [ REC ] to enter the recording submenu. The
operations are the same as those in “Start Recording”.
Press [ ESC / ] to stop recording and a confirmation
dialogue is shown. The recorded file is automatically
saved in the “Voice” system directory.
Quick recording
b)
external audio signal input via LINE IN jack.
built-in microphone.
Sources Selection
c)
LINE IN :
MIC :
when “MIC” is selected as the recording
source, a “Voice” directory will be
automatically created. When “LINE IN” is
selected as the recording source, an “Audio”
directory will be automatically created. When
performing an FM recording, a “Radio”
directory will be automatically created. The
recorded files will be saved to corresponding
directories.
Note :
