MIRABELLA I003323 Bedienungsanleitung

1 | P a g e

Quick Start Guide

Mirabella Genio Smart Star Projector

KEYCODE: I003323

V6.0.0 1/08/2021

2 | P a g e

The smart star projector is an entertaining electronic device and can project

the starry sky on your ceiling with floating colourful clouds. it will give you

the visual experience of the milky way and galaxy nebula without step

outside of your room.

1. Laser light

2. Projector light

3. Switch button /indicator light

SPECIFICATION

Classiﬁcation of lasers

Class 1

Work Temperature

-10~40℃

Wireless Type

WiFi 2.4Ghz

Laser color

Green

Nebula color

Red,Green, Bule,

Application

Indoor use

Control by

Amazon Alexa, Google Home, APP

Dimensions(cm)

16.2L*6.8W*16.2H

Net Weight

0.5Kg

3 | P a g e

Warnings:

Please keep away from children. Children need to use it under adult

supervision.

Please use the product in line with instructions.

Do not stare directly at the projection lens.

Do not disassemble and assemble by yourself.

For indoor use only.(Works better in a dark environment)

Only use with the adaptor provided.

Do not point the laser light at the person or pet.

Please keep the projector away from water to avoid damage.

Do not cover the laser light with cloths or other objects.

Manual control & APP control

This star projector can be used either manually or via the Genio App.

When the project is powered on for the first time, the switch button & indicator light

will be solid blue, it is can be operated manually using the switch button without

using the need for Genio APP.

Press the switch button to cycle through different projection modes.

green star + colour nebula,

green star + blue nebula,

green start + red nebula,

green star + green nebula,

green star + colour nebula

green star only,

Off.

To make it ready for APP pairing, press and hold the switch button until the indicator

light starts to blink BLUE rapidly, the projector is now ready to be paired with Genio

App using EZ mode, and if no action is taken, after 3 minutes it will stop blinking,

once it has stopped blinking it will return to manual control mode.

4 | P a g e

Connection Preparation for it to be used with the Genio App.

Your phone must be connected to 2.4Ghz Wi-Fi and not to the 5GHz network.

To verify your mobile device is set to a 2.4Ghz Wi-Fi network, navigate to the

Settings menu and click on Wi-Fi. In this menu, you will see all the detectable

networks in your area. Connect to the Wi-Fi name that does not end with a 5G /

5GHz.

Refer to the example on the next page.

Once you have confirmed that you have selected the 2.4GHz network, check that you

have a strong WI-FI signal (at least two bars) in the location where the smart device is

to be installed.

If you don’t have at least two bars signal on your phone, then you may need to

reconsider relocating the smart device to a different location or obtain a Wi-Fi

extender to boost the WI-FI signal strength.

Install the APP and register Account

For the best experience, download the "Mirabella Genio" APP to your smartphone

from the App Store or Google Play, Genio APP icon will be displayed after it has been

installed successfully.

5 | P a g e

Bluetooth Pairing method

Our latest Genio smart device has the Bluetooth pairing assistant function, to make

the pairing even easier than before, to take advantage of this function, please turn

ON your phone’s Bluetooth

1. Remove the protective film sticker from the laser lens

2. Connect the power to the projector using the supplied adapter then switch

it on.

3. Press and hold the Switch button and wait for the indicator light start to

blinking, once the BLUE indicator light is rapidly blinking, the projector is

ready to pair

4. Open the Mirabella Genio APP, tap on the “+” on the top right

Genio APP will automatically discover the projector, tap on Go to add,

Then select the plus symbol +, then enter your 2.4Ghz Wi-Fi name and

password (don’t use Wi-Fi name that is end with -5G) and Confirm

5. Wait for the projector to been added to your Genio APP.

If the Bluetooth method doesn’t work for you, please turn the

Bluetooth OFF on the phone, then try the EZ method below

6 | P a g e

Pairing the Star Projector using Mirabella Genio App (EZ method)

1. Make sure the indicator light is blinking BLUE rapidly (2 blinks per second) –The

projector is now ready to pair.

If the indicator light is solid blue or blinking blue slowly (1 blink every 2

seconds) then press and hold the switch button until the indicator light is

blinks Blue rapidly.

2. Open the Mirabella Genio APP, then tap on “+” symbol, then choose Electrical,

and select Star Projector from the menu.

3. Follow the instructions on the app to finish the pairing process.

If the fast-blinking method (EZ method, mentioned above)

doesn’t work, keep the Bluetooth OFF on the phone and try the

slow blinking (AP method) below. While the indicator light is blinking

BLUE rapidly (2 blinks every second), press and hold the switch button again

until the indicator light blinks Blue slowly,(1 Blink every 2 seconds) the projector

is now ready to be paired via the AP mode.

7 | P a g e

Open the Genio APP, this time in the reset the device first screen, tap on EZ mode in

the Top right-hand corner just below the battery icon, then select AP Mode (refer to

the 1st and 2nd image below)

Now Confirm indicator slowly blinking (refer to image 3), hit Next, then Go

to connect and connect to Wi-Fi named SmartLife_XXXX

Note: If you failed to see Wi-Fi name beginning with the word

SmartLife_XXXX, that mean device is not slowly blinking, please reset again

8 | P a g e

After connected to SmartLife_XXXX, return back to Mirabella Genio, the APP will

commence the adding devices process

Please pay attention to the screen to determent the cause of the time-out error

If the light never stops

blinking, there could be an

issue with your phone’s

local network setting, if

you are using IOS 14, local

network permission must

turn on for Genio APP

if light does stop blinking

but is unable to progress to

“register on cloud” it

indicates a communication

error with your router to

our cloud service (need to

check router setting)

please check and ensure

1. You enter the correct

2.4Ghz Wi-Fi name and

password

2.Your Genio device is in a

location with good Wi-Fi

coverage

3. 5Ghz Wi-Fi signal is

turned off on the router

Projector User interface (may subject to change due to software update)

Tap on the pencil icon, for the projector’s

settings page

Device information: You can check the

device ID, IP, Mac address, Wi-Fi Signal

strength

Share Device: share the control of this

projector with another Genio user

Remove Device: remove the device from

Genio APP, so you can reset and pair it

again under new Wi-Fi or new genio

account

9 | P a g e

FAQ:

How to connect Star Projector to another router/genio account?

Go to the Star Projector’ settings page, look for “remove device” Remove it and reset

the star projector and pair it again through the APP.

Star Projector goes offline and doesn’t reconnect back after a power failure?

Go to the Star Projector’ settings page, look for “remove device” Remove it and reset

the Star Projector and pair it again through the APP.

Using the EZ method and still Received the time out Cannot find Device error?

If you using an android device, Try borrow an Ipad or iPhone to pair, download the

Genio APP to iPad or iPhone, log in using your existing Genio user name and

password, pair it, then go back to your android device, it will show up under your

account

Ensure Star Projector is in a location with strong Wi-Fi signal coverage

Manually disable the 5Ghz Wi-Fi signal on the router setting (please check our online

FAQ page or contact your internet provider if you are not sure how to disable it)

Ensure that the 2.4Ghz Wi-Fi signal is on.

Ensure the indicator light is blinking BLUE rapidly and complete the whole pairing

process with in 3 minutes

Please check you have entered the correct 2.4Ghz Wi-Fi SSID and password

I am using Optus/Telstra NBN, I am having issue pairing it?

Please try the method on our online FAQ page

https://www.mirabellagenio.com.au/faqs/

If you have done all of the above, ensuring that the 5Ghz is disabled and still failed to

connect, then your modem could be incompatible with the smart device or you may

have reached the max number of the WI-FI devices your router can support.

All trademarks are used for reference purposes only.

Made in China

MIRABELLA INTERNATIONAL PTY LTD

1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043

TOLL FREE: 1800 636 528, www.mirabellagenio.com.au

Inhaltsverzeichnis

Andere MIRABELLA Wohnbeleuchtungszubehör Handbücher

MIRABELLA

MIRABELLA ANKO 1.4M RGB Pixel Corner Light Bedienungsanleitung

Beliebte Wohnbeleuchtungszubehör Handbücher anderer Marken

Coopers of Stortford

Coopers of Stortford H700 Bedienungsanleitung

LIVARNO home

LIVARNO home 427687 2301 Bedienungsanleitung

Alpine

Alpine CRD100S-MC Bedienungsanleitung

IKEA

IKEA ORMANÄS Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TY444-1711-5 Bedienungsanleitung

Kingfisher

Kingfisher 3663602491309 Bedienungsanleitung

EKVIP

EKVIP 022464 Bedienungsanleitung

Tronix

Tronix 033-028 Bedienungsanleitung

Goobay

Goobay 57940 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday 23RT04623112 Bedienungsanleitung

Philips

Philips 6915160PH Bedienungsanleitung

MELINERA

MELINERA Z31531A Bedienungsanleitung

abc home garden

abc home garden 22594 Bedienungsanleitung

IKEA

IKEA KALLT Bedienungsanleitung

Gainsborough

Gainsborough K337 Bedienungsanleitung

Costco

Costco 1900354 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TY415-1911 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TY476-1611-1 Bedienungsanleitung