Mircom FX-MNS-6000 Bedienungsanleitung

Installation and Operation Manual

Network Fire Alarm and Emergency Communication System

LT-6683 Rev 0

August 2021

FX-MNS-6000

Table of Contents

1.0 Introduction 1

1.1 The FX-MNS-6000 Network Fire and Emergency Communication System ................... 1

1.2 Document Conventions .................................................................................................. 4

1.3 FX-MNS-6000 Fire and Audio Expansion System Layout .............................................. 4

1.4 FX-MNS-6000 Fire with Audio Expansion System Layout ............................................. 6

2.0 System Components 7

3.0 Installation 13

3.1 BBX-FXMNS-6000 Enclosure Installation ...................................................................... 13

3.2 QBB-6001 Expansion Audio Cabinet Installation ........................................................... 18

3.3 QBB-6001 Enclosure ...................................................................................................... 19

3.4 Display Modules ............................................................................................................. 20

4.0 Module Settings 21

4.1 Main Fire Alarm Module (MD-871A “N” Version Main Chassis) ..................................... 21

4.2 DSPL-420DS Main Display Module ................................................................................ 22

4.3 DSPL-2440 Graphical Main Display Module .................................................................. 23

4.4 FNC-2000 Fire Network Controller Module .................................................................... 24

4.5 FOM-2000-UM Fiber Optic Network Module .................................................................. 25

4.6 RAX-1048TZDS Zone Display Module ........................................................................... 26

4.7 IPS-4848DS Programmable Input Switches Module ...................................................... 27

4.8 IPS-2424DS Programmable Input Switches Module ...................................................... 28

4.9 FDX-008W(KI) Fan Damper Control Display Module ..................................................... 29

4.10 DM-1008A Hardwire Detection Adder Module ............................................................... 32

4.11 SGM-1004A Hardwire Signal Adder Module .................................................................. 33

4.12 RM-1008A Hardwire Relay Adder Module ..................................................................... 34

4.13 Polarity Reversal and City Tie Module (Model PR-300) ................................................. 35

4.14 UDACT-300A MAIN BOARD .......................................................................................... 36

4.15 ALCN-792MISO Isolated Quad Loop Adder Module with ALCN-792D Daughter Board 38

5.0 Field Wiring for Fire Alarm 41

5.1 Main Fire Alarm Board Wiring ........................................................................................ 41

5.2 Addressable Loop Wiring ............................................................................................... 43

5.3 Network Wiring ............................................................................................................... 49

5.4 Analog Initiating Wiring ................................................................................................... 51

5.5 Analog NAC Wiring ......................................................................................................... 52

5.6 Analog Relay Wiring ....................................................................................................... 53

5.7 Polarity Reversal and City Tie Module (PR-300) Wiring ................................................. 54

5.8 UDACT-300A Main Board Terminal Connections .......................................................... 55

5.9 Power Supply Wiring ...................................................................................................... 56

5.10 Wiring Tables and Information ....................................................................................... 58

6.0 Field Wiring of Audio 60

6.1 QBB-6001 Enclosure (Expansion Cabinet) Assembly ................................................... 60

6.2 Installing and Removing Amplifiers ................................................................................ 61

6.3 QCC-6000 Communications Card ................................................................................. 62

6.4 Audio Network Card and Telephone Network Card ....................................................... 66

6.5 ANC-6000 Audio Network Controller Board ................................................................... 67

6.6 ANC-6000 Wiring ........................................................................................................... 68

7.0 QMP-6101NV Vertical Paging Control Module 69

7.1 Paging Modules ............................................................................................................. 70

7.2 QAZT-5348DS Zoned Paging Selector Panel ................................................................ 71

8.0 QMP-6101NV Paging Operation 72

8.1 QMP-6101NV LEDs ....................................................................................................... 72

8.2 QMP-6101NV Pushbutton Controls ............................................................................... 73

8.3 QAZT-5348DS Paging Selector Panel LEDs ................................................................. 73

8.4 QAZT-5348DS Pushbuttons .......................................................................................... 73

9.0 TNC-5000 Telephone Network Controller Module 74

9.1 Module Mounting Locations ........................................................................................... 74

9.2 Typical Addressable Telephone Set-up ......................................................................... 74

9.3 Connectors and Terminal Locations .............................................................................. 75

9.4 TNC-5000 Telephone Wiring ......................................................................................... 76

9.5 QMT-5302NV Vertical Master Telephone ...................................................................... 78

9.6 QMT-5302NV Connections ............................................................................................ 79

9.7 QMT-5302NV Connections ............................................................................................ 79

9.8 QAZT-5348DS Network Firefighters’ Telephone Selector Panel ................................... 80

9.9 Telephone Operation ..................................................................................................... 81

9.10 QMT-5302NV Master Telephone LEDs ......................................................................... 81

9.11 QMT-5302NV Master Telephone Pushbutton Controls ................................................. 81

9.12 QAZT-5348DS Network Telephone Selector Panel LEDs ............................................. 82

9.13 QAZT-5348DS Network Telephone Selector Panel Pushbuttons .................................. 82

9.14 Audio Amplifier Wiring .................................................................................................... 82

9.15 Amplifier Mounting Installation ....................................................................................... 82

9.16 Amplifier Wiring .............................................................................................................. 85

iii

10.0 Indication 91

10.1 Amplifier Displays ........................................................................................................... 91

11.0 Audio Configuration 92

12.0 System Checkout 93

12.1 Before Turning the Power On ........................................................................................ 93

12.2 Power-Up Procedure ...................................................................................................... 93

12.3 Troubleshooting ............................................................................................................. 93

13.0 Indicators, Controls, and Operation 94

13.1 Common Indicators ........................................................................................................ 95

13.2 Common Controls .......................................................................................................... 96

13.3 Single Stage Operation .................................................................................................. 99

13.4 Two Stage Operation ..................................................................................................... 99

13.5 Pre-Signal Operation ...................................................................................................... 101

13.6 Circuit Types .................................................................................................................. 101

14.0 Configuration 104

14.1 Configuration Backup, Query and Fast-Forward ............................................................ 104

14.2 OPEN Graphic Navigator Software Package ................................................................. 104

14.3 Ethernet Port .................................................................................................................. 104

14.4 Boolean Logic Engine .................................................................................................... 105

14.5 Multiple Configuration file support .................................................................................. 105

15.0 Appendix A: Specifications 106

15.0 Compliance .................................................................................................................... 107

15.1 FX-MNS-6000 Audio Specifications ............................................................................. 108

16.0 Appendix B: Power Supply and Battery Calculations 109

16.1 RAXN-LCD/RAXN-LCDG ............................................................................................... 110

17.0 Appendix C: DIP Switch Settings 111

17.1 FX-6000MNS-CH Network Main Board Address Setting (DIP SWITCH SW2) .............. 111

17.2 ANC-6000 Audio Network Controller Board Address Setting (DIP SWITCH SW1) ....... 112

17.3 ACN-792MISO Loop Adder Module (CPU) Address Setting (DIP SWITCH SW1) ........ 112

17.4 RAXN-LCD/RAXN-LCDG Remote Annunciator Address Setting (DIP SWITCH SW1) . 112

18.0 Appendix D: Alarm Verification Timing 113

19.0 Appendix E: Wiring For Addressable Supervised

Output Module 114

20.0 Appendix F: Power Supply & Batteries for Audio

Expansion Cabinet QBB-6001 115

21.0 Appendix G: APB-200/COA Sounder Bases 116

22.0 Appendix H: Configuration Example Setup 117

23.0 Warranty and Warning Information 137

List of Figures

Figure 1 Typical FX-MNS-6000 Layout ......................................................................................... 5

Figure 2 Typical FX-MNS-6000 Layout with Audio Expansion ..................................................... 6

Figure 3 BBX-FXMNS-6000 Enclosure ........................................................................................ 13

Figure 4 BBX-FXMNS-6000 Enclosure Complete View ............................................................... 14

Figure 5 FX-6000MNS-CH mounted within the BBX-FXMNS-6000 Enclosure ............................ 15

Figure 6 BBX-FXMNS-6000 Backbox Dimensions and Contents ................................................. 16

Figure 7 BBX-FXMNS-6000 Inner Door ........................................................................................ 17

Figure 8 QBB-6001 Dimensions, Mounting Holes and Knockouts for Installation ....................... 18

Figure 9 QBB-6001 Expansion Audio Cabinet Module Placement ............................................... 19

Figure 10 Main Fire Alarm Module (MD-871A”N” Version Main Board. .......................................... 22

Figure 11 DSPL-420 Main Display Module (Part of Main Chassis c/w Main Fire Alarm Module) ... 22

Figure 12 DSPL-2440 Graphical Main Display Module ................................................................. 23

Figure 13 FNC-2000 Fire Network Controller Module .................................................................... 24

Figure 14 FOM-2000-UM Fiber Optic Network Module .................................................................. 25

Figure 15 Zone Display Module (RAX-1048TZDS) ......................................................................... 26

Figure 16 IPS-4848DS Programmable Input Switches Module ...................................................... 27

Figure 17 IPS-2424DS Programmable Input Switches Module ...................................................... 28

Figure 18 Fan Damper Control Display Module (FDX-008W(KI)) ................................................... 29

Figure 19 FDX-008W Block Diagram of Fan and Monitor Set-up ................................................... 30

Figure 20 FDX-008WKI Fan Damper Control Display Module ....................................................... 31

Figure 21 Hardwire Detection Adder Module (DM-1008A) ............................................................. 32

Figure 22 Hardwire Signal Adder Module (SGM-1004A) ................................................................ 33

Figure 23 Hardwire Relay Adder Module (RM-1008A) ................................................................... 34

Figure 24 Polarity reversal and city tie module ............................................................................... 35

Figure 25 UDACT-300A Board Layout .......................................................................................... 36

Figure 26 ALCN-792MISO Quad Loop Adder Module .................................................................... 39

Figure 27 ALCN-792D Daughter Board .......................................................................................... 40

Figure 28 Main Fire Alarm Controller Board Field Terminal Connections ...................................... 41

Figure 29 Main Fire Alarm Control board Field Terminal Connections (continued) ........................ 42

Figure 30 Loop Terminal Connections - Class B ............................................................................ 43

Figure 31 Loop Terminal Connections - Class X (Formerly Style 7) .............................................. 44

Figure 32 Loop Terminal Connections - Class A ............................................................................ 45

Figure 33 Quad Loop Terminal Connections - Class B .................................................................. 46

Figure 34 Quad Loop Adder Module Terminal Connections - Class X (Formerly Style 7) .............. 47

Figure 35 Quad Loop Adder Module Terminal Connections - Class A ........................................... 48

Figure 36 Class X Wiring for the FNC-2000 Module ....................................................................... 49

Figure 37 FOM-2000-UM Fiber Optic Network Adder Module Wiring ............................................ 50

Figure 38 Hardwire Detection Module (DM-1008A) Terminal Connections .................................... 51

Figure 39 Hardwire Signal Module Terminal Connections .............................................................. 52

Figure 40 Hardwire Relay Module Terminal Connections .............................................................. 53

Figure 41 Polarity reversal and city tie module terminal connection ............................................... 54

Figure 42 Telephone Line Wiring Diagram ..................................................................................... 55

Figure 43 Power Supply Connections ............................................................................................. 56

Figure 44 Power Supply Connections within BBX-FXMNS-6000 Enclosure. ................................. 57

Figure 45 QBB-6001 Expansion Audio Cabinet Module Placement ............................................... 60

Figure 46 QCC-6000 Communications Card .................................................................................. 63

Figure 47 QCC-6000 Rotary Switch ............................................................................................... 63

Figure 48 Installing the QCC Communications Card. ..................................................................... 64

Figure 49 QCC-6000 Communications Class B Wiring .................................................................. 65

Figure 50 QCC-6000 Communications Class A Wiring .................................................................. 65

Figure 51 Mounting the Audio and Telephone Card over the Main Fire Alarm Board in

FX-6000MNS-CH ............................................................................................................ 66

Figure 52 ANC-6000 Audio Network Controller board .................................................................... 67

Figure 53 ANC-6000 Wiring Diagram ............................................................................................. 68

Figure 54 QMP-6101NV Vertical Paging Control Module ............................................................... 69

Figure 55 QMP-6101NV Network Master Paging Control Module Connections and

Terminal Blocks ............................................................................................................... 70

Figure 56 Typical Addressable Telephone Set-up .......................................................................... 74

Figure 57 TNC-5000 Telephone Network Controller Board Layout ................................................ 75

Figure 58 Telephone Bus Wiring Diagram ...................................................................................... 76

Figure 59 TNC-5000 Telephone Zone Wiring ................................................................................. 77

Figure 60 QMT-5302NV Master Firefighters’ Telephone ................................................................ 78

Figure 61 QMT-5302NV Cable Connection and Terminal Wiring .................................................. 79

Figure 62 QAZT-5348DS Network Firefighters' Telephone Selector Panel .................................... 80

Figure 63 QAZT-5348DS Telephone Selector Panel Cable Connections. ..................................... 81

Figure 64 Installing the Amplifiers into the QMB-6000 Card Cage ................................................. 83

Figure 65 QMB-6000 Terminals for Amplifier Wiring ...................................................................... 84

Figure 66 Wiring for 100 Watt Amplifier Circuit ............................................................................... 85

Figure 67 Wiring for 75W and 25W Amplifier Circuits ..................................................................... 87

Figure 68 Wiring for 50W Amplifier Circuits .................................................................................... 88

Figure 69 Wiring for 25W Amplifier Circuits .................................................................................... 89

Figure 70 Audio Cabinet Displays and Controls ............................................................................. 91

Figure 71 Indicators and Control Location ...................................................................................... 94

Figure 72 Evacuation Codes .......................................................................................................... 103

vii

List of Tables

Table 1: FX-6000MNS System Components ............................................................................... 7

Table 2: FNC-2000 Module List of Connectors and Jumpers and Functions ............................. 24

Table 3: FOM-2000-UM Fiber Optic Network Module Cable Connection .................................... 25

Table 4: RAX-1048TZDS Zone Display Module Cable Function ................................................. 26

Table 5: IPS-4848DS Programmable Input Switches Module Cable Function ............................ 27

Table 6: IPS-2424DS Programmable Input Switches Module Cable Function ............................ 28

Table 7: PR-300 jumper settings ................................................................................................. 35

Table 8: UDACT-300A Cable Connectors and Miscellaneous .................................................... 36

Table 9: UDACT-300A List of LEDs and their Functions ............................................................. 37

Table 10: UDACT-300A List of Jumpers for Operation and Configuration .................................... 37

Table 11: Wiring Table for Initiating Circuits. ................................................................................. 58

Table 12: Wiring Table for NACs ................................................................................................... 58

Table 13: Analog Loop Wiring ........................................................................................................ 59

Table 14: TNC-5000 Connectors and Terminals ........................................................................... 75

Table 15 End of Line Resistor Value for Amplifier Circuits ........................................................... 86

Table 16 Wiring Chart for 70V Speakers ...................................................................................... 90

Table 17 Wiring Chart for 25V Speakers ...................................................................................... 91

Table 18 FX-MNS-6000 Audio Specifications ............................................................................... 108

1.0 Introduction

1.1 The FX-MNS-6000 Network Fire and Emergency

Communication System

Mircom’s FX-MNS-6000 Network Fire Alarm and Emergency Communication system offers

modular components for network systems providing a wide variety of applications. Designed

for peer to peer network communications, using industrial standard ARCnet protocol. The FX-

MNS-6000 allows for a maximum of 63 nodes (where a node can be a control center or a floor

panel) while providing reliability and flexibility. This fire alarm and audio system provides

zoned emergency multi-channel audio with emergency paging and fire evacuation, and an

optional firefighters’ telephone communication to and from the CACF (Central Alarm and

Control Facilities) location to all remote telephone handsets.

Each integrated fire and audio network panel or BBX-FXMNS-6000 node consists of an

enclosure which contains both an audio portion and a fire alarm portion. The fire alarm portion

consists of a FX-6000MNS-CH Main Chassis, which accommodates the main fire alarm

control board, an ANC-6000 Audio Network Card, and a TNC-5000 Telephone Network Card.

The audio portion consists of a QMB-6000 card cage that holds up to 4 amplifiers and a QCC-

6000 Communications Card. Also, within this BBX-FXMNS-6000 enclosure is a QPS-6650

power supply and batteries.

Each FX-6000MNS-CH node main fire alarm board provides one intelligent analog loop

supporting 159 Advanced Protocol (AP) analog sensors and 159 AP addressable modules

(with a maximum of 99 CLIP sensors and 99 CLIP addressable modules). For example, if

there are 99 CLIP (non AP) sensors on a loop, you may add an additional 60 AP sensors for a

total of 159. NOTE: AP sensors and monitors can be set as CLIP sensors and monitors for

retrofit use. There are also 4 Class A/B Indicating Circuits (NACs) rated at 1.7 amperes each

and a large 4 x 20 back-lit alphanumeric LCD display.

The paging microphone and firefighters’ telephone may be used together or independently,

connected to a Central Alarm and Control Facility (CACF).

For communication and annunciation there is a microphone for paging, a paging selector

panel, firefighters’ telephone and associated selector panels all housed in a central enclosure

(CACF). The master paging and telephone modules are intended for installation in a CACF.

The QBB-6001 is an expansion audio only cabinet (connected to an BBX-FXMNS-6000 node).

It contains two QMB-6000 card cages which hold up to 4 QAD-6425-70/25 amplifiers each for

a total of 8 amplifiers and a QCC-6000 Communications Card. Also contained in this cabinet is

a QPS-6650 power supply and batteries.

1.1.1 Overall Fire Alarm Features

• Large System Capacity and Modular Design.

• Provides peer-to-peer network communications

• Supports up to 63 nodes (including lobby panel).

• Supports copper and/or fiber optic network cable.

• Supports a request, grant, or deny system with all controls disabled on node

annunciators as per ULC 527-11.

• Supports a degraded mode of operation (more than one operating node) and a

standalone mode of operation (only one operating node) as per ULC 527-11.

Inhaltsverzeichnis

Andere Mircom Konferenzsystem Handbücher

Mircom

Mircom TX3 Series Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung