Mission 529i Bedienungsanleitung
Mission 529i Rechargeable Isolated Power Supply
Quick Start Guide
STOP!
Please read this before connecting your Mission 529
What is the 529i
The Mission 529i is an 8 channel all isolated pedalboard power supply with integrated
high capacity rechargeable battery. The 529i can power your pedal board by itself, no wall
power outlet other power source is required. The 529i also includes an isolated USB
output for charging smart phones, or powering devices such as wireless systems. The
internal battery can be recharged via a USB input or a 12V DC source.
Features
Integrated rechargeable battery provides around two hours life for typical pedalboard
8 fully isolated ground outputs provide stable and noise free power to pedals
6 x 300mA and 2 x 500mA outputs for high power digital pedals
USB output for charging smart phone or tablet
Recharge via USB, AC adapter, or other 12V DC supply
Multi color LED indication of output condition, power input, and charge state
Extensive over/under current and short circuit protection for safe and stable
operation
What’s in the box?
Mission 529i Power Supply
8 x 2.1mm power cables
1 x Y cable
1 x USB cable
User Manual
Connections
1) Connect the AC adapter to 100~240v AC power
2) Connect the AC adapter output to the 12V input to charge the battery
3) The battery is fully charged when all 5 green charge state LED’s are lit
4) Connect pedals to the appropriate outputs using the 2.1mm DC cables supplied. All
outputs are 9VDC center pin negative
Operation
1) Press the ON/OFF Button to turn on the outputs. The green LED output indicators will
light
2) To charge a smart phone or power a compatible USB device, use a USB A type cable to
connect to the USB out. Maximum available power from the USB output is 10W (5V @
2A). The ON/OFF switch controls the USB output as well as the 9V outputs.
Technical Info
INPUT: DC 12V, 2000mA
INPUT: USB 2.0 5V, 1000mA, Type B mini
OUTPUTS: 2x9v@500mA (MAX), 6x9v@300mA (MAX),
POLARITY: All barrel connections 2.1mm center pin negative
DIMENSIONS: 5.5”X2.75”X1.25”
WEIGHT: 0.9LB
AC to DC adapter
INPUT: AC 100v~240v at 50/60Hz.
OUTPUT: DC 12v, 2000mA
POLARITY: 2.1mm center pin negative
Important Notice
•Do not use this apparatus near water
•Unplug this apparatus during lightning storms or when unused for long periods of
time
•Do not install near heat sources
•Use only attachments and accessories specified by the manufacturer
•Do not drill or otherwise puncture the enclosure
•Do not open the enclosure. No user serviceable parts inside
•Refer all service to qualified service personnel. Service is required when the apparatus
has been damaged in any way.
○
C2019 MISSION ENGINEERING INC
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Inhaltsverzeichnis
Andere Mission Stromversorgung Handbücher
