Mitox CS45 SELECT Bedienungsanleitung
Operator’s Manual
user manual, maintenance instructions and spare parts
CS45 / CS50 SELECT Chainsaw
www.mitox.co.uk
Read this manual carefully before operating the machine
Original Instructions Version July 16
CS45-50_130716
CS45 / CS50 SELECT Chainsaw
2
Original Instructions Version July 16
CS45-50_130716
Component Location
1Chain brake
2Starter handle
3Air cleaner cover
4Choke knob
5Throttle interlock
6Right handle
7Throttle lever
8Rear handle
9Engine switch
10 Fuel tank
11 Oil tank
12 Front handle
13 Saw chain
14 Guide Bar
PRODUCT DESCRIPTION
This Chainsaw is a 2 stroke fast running power tool and is designed to be used in a domestic
application for cutting wood only. Do not cut metal, plastic or any non-wood materials.
CS45 / CS50 SELECT Chainsaw
3
Original Instructions Version July 16
CS45-50_130716
Warnings in the Manual
This mark indicates instructions which must be followed in order to prevent accidents which could
lead to serious bodily injury or death.
This mark indicates instructions which must be followed or it leads to mechanical failure, breakdown,
or damage.
This mark indicates hints or useful directions in the use of the product.
IMPORTANT
!
NOTE
Warning: Danger, Caution
Read the documentation and safety instructions which are
provided in this user manual
When operating this machine, use protective equipment such
as goggles, helmet and ear defenders
Use the Chainsaw with two hands
Beware: Keep hands and feet away from moving parts.
Always keep a safe distance from the cutting parts
Beware of objects being thrown from the operating zone
Warning! Danger of Kickback
Safety Symbols
CS45 / CS50 SELECT Chainsaw
4
Original Instructions Version July 16
CS45-50_130716
Directive 2000-14/CE. Guaranteed noise levels
Danger: Risk of intoxication
Danger: Risk of fire or explosion
Hot surface, risk of burn
Explanation of Symbols on the Machine
For safe operation and maintenance, symbols are carved in relief on the machine.
STOP
PULL
STOP
PULL
STOP
PULL
FUEL TANK
2 stroke mix
Position: Fuel cap
CHAIN OIL TANK
Position: oil cap
STOP SWITCH
Setting the switch to the “O” position, the engine stops immediately.
Position: Rear-left of the unit
Taking Care of Warning Labels
Always keep warning labels clean and free of scratches, which might make them illegible or
dicult to read. If the warning labels provided with your Chainsaw become damaged, peel
o, or otherwise become illegible or dicult to read, order new labels from the authorised
servicing dealer and replace the damaged labels. When applying new labels, first wipe away any
dirt and dry the surface before applying the new label in the same place as the original label.
CS45 / CS50 SELECT Chainsaw
5
Original Instructions Version July 16
CS45-50_130716
)
)
)
)
)
H
CHOKE OPERATION
<RUN>
Starting mode when the engine is hot.
Position: Upper-right of the air cleaner cover
<START>
Starting mode when the engine is cold.
Position: Upper-right of the air cleaner cover
HIGH-SPEED ADJUSTMENT SCREW
Position: Left side, screw under “H” stamp
SLOW-SPEED ADJUSTMENT SCREW
Position: Left side, screw under “L” stamp
IDLE ADJUSTMENT SCREW
Position: Left side, screw under “T” stamp
CHAIN BREAK RELEASE / ACTIVATION
Released (white arrow) and Activated (black arrow).
Position: Front of the chain cover
L
T
Safety Precautions
Read this Owner/Operator Manual carefully. Be sure you understand how to operate this
Chainsaw properly before you use it. Failure to do so could result in serious injury.
Keep this manual handy so that you may refer to it later whenever any questions arise. Also note
that you are able to contact your authorised MITOX® dealer for assistance.
Always include this manual when selling, lending, or otherwise transferring the ownership of this
product.
This product has been designed to be used as a Chainsaw power tool as described previously and
it should never be used for any other purpose; doing so could result in unforeseen accidents and
injuries occurring. Only approved MITOX® accessories should be used with this product.
CS45 / CS50 SELECT Chainsaw
6
Original Instructions Version July 16
CS45-50_130716
This Chainsaw is equipped with extremely an extremely sharp blade, always wear sturdy gloves
when handling the blades and fit the safety guards when not in use.
When using this Chainsaw for the first time, take it to a wide, clear, open space, start the engine,
and practice handling the Chainsaw until you are sure that you will be able to handle it properly in
actual operation.
You should never use this Chainsaw when under the influence of alcohol, suering from
exhaustion or lack of sleep, suering from drowsiness as a result of having taken medicine, or at
any other time when your judgement might be impaired or that you might not be able to operate
the Chainsaw properly and in a safe manner.
Never allow children or anyone unable to fully understand the directions given in this manual to
use this Chainsaw.
When planning your work schedule, allow plenty of time to perform the work and allow plenty
of time for rest. Limit the amount of time you continuously use this product to 30-40 minutes per
session and take 10-20 minutes of rest between work sessions. Also, try to keep the total amount
of work performed in a single day to 2 hours.
Never run the engine indoors as the exhaust gases contain harmful carbon monoxide.
Never use this Chainsaw in the conditions described below:
When the ground is slippery or when other conditions exist which might make it dicult to
maintain a steady posture while using this product.
At night, at times of heavy fog, or at any other time when your field of vision is limited and it
would be dicult to gain a clear view of the area where it is to be used. In heavy rain, during
lightning storms, at times of strong or gale-force winds or at any other time when the weather
conditions might make it unsafe to use this product.
CS45 / CS50 SELECT Chainsaw
7
Original Instructions Version July 16
CS45-50_130716
Work Clothing & Safety Equipment
When using this product, you should wear the correct Personal Protective Equipment.
• Helmet
• Safety goggles / face protector
• Ear protection
• Thick work gloves
• Non-slip, steel toe capped work boots
• Strong, durable work clothing; shirts should be long sleeved and trousers should be full length
Safety and Operation
Improper handling can cause accidents which may in turn lead to serious injury or
death. Always adhere to the following instructions when using this product:
• Never hold this product with the cutting head pointing towards someone else.
• Never allow the blade/blades to come into contact with your body.
• Always turn o the engine before making adjustments or when coming close to the cutting head.
Before Starting Work
Carefully check the work area and remove any obstacles. A perimeter of 15 metres of the work
area should be considered a hazardous area, into which no-one should enter while this product
is being used. When necessary this area should be marked with a warning rope, warning signs or
other forms of warning.
If work is to be carried out by two or more operators, care should be taken to constantly check
the location of other operators within the work area, to maintain a safe distance between each
operator.
CS45 / CS50 SELECT Chainsaw
8
Original Instructions Version July 16
CS45-50_130716
Before starting work all components of this product should be checked to make sure that it is
in proper working order. Ensure there are no loose screws or bolts, fuel leaks, ruptures, dents,
broken guards or any other problems which might aect the safe operation.
Keep all parts of your body away from the cutting head when the engine is running.
Before Starting the Engine
Place your machine on the ground in a flat, clear area and hold it firmly to ensure that neither the
cutting head or throttle come into contact with any obstacles when the engine starts.
After Starting the Engine
Ensure the cutting head stops moving when the throttle trigger is released (idle). If the cutting
head continues to move when the engine is at idle, adjust the idle screw on the carburettor to a
point where the cutting head stops moving. If this cannot be achieved, take your machine to your
authorised MITOX® dealer for adjustment.
Avoid Noise Problems
Check and follow the local regulations for sound levels and hours of operation for garden
machinery. In general, operate garden machinery between 8am and 5pm weekdays and 9am
and 5pm weekends. Avoid using garden machinery early in the morning and/or late at night.
Safety During Operation
When using your Chainsaw, grip the handles firmly with both hands, place your feet slightly apart
so your weight is distributed evenly across both legs and always be sure to maintain a steady even
posture while working. Do not use on ladders or if the ground surface is slippery or uneven. Never
attempt to cut overhead or with one hand.
NOTE
CS45 / CS50 SELECT Chainsaw
9
Original Instructions Version July 16
CS45-50_130716
• Maintain full engine speed when cutting.
• Never allow other persons to come within the work area as doing so might expose them to
danger.
• If a branch or other object gets caught in the blades during operation, always turn o the
engine before removing the object.
• To protect yourself against injury from falling branches, wear the required safety equipment.
• Keep the operation area clear of all persons, particularly small children and pets. Injury may
result from flying debris.
• Never touch the spark plug or plug HT cable while
the engine is in operation, doing so may result in
an electrical shock.
• Never touch the exhaust, spark plug or any metallic parts of
the engine while the engine is in operation or immediately
after shutting down the engine. These parts reach high
temperatures during operation and doing so could result
in serious burns.
• When you finish cutting in one location and wish to continue work in another area, turn o the
engine, place the protective cover over the blades, and turn the chain saw so that the blades
face away from your body before carrying it to the new location.
• Always remove fuel from the fuel tank before transportation to prevent fuel spillage.
• When not in use never leave the chain saw exposed to direct sunlight as this can heat the fuel
tank and may cause a discharge of fuel, and flood the engine.
CS45 / CS50 SELECT Chainsaw
10
Original Instructions Version July 16
CS45-50_130716
In the Box
A standard saw unit package contains the items as illustrated.
1) Power unit
2) Saw chain
3) Guide bar
4) Bar protector
5) Plug wrench
6) Spike and mounting screws, dependent on model
Not pictured
7) Owner’s manual
Andere Handbücher für CS45 SELECT
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Mitox Kettensäge Handbücher
Mitox
Mitox CS62 Select Bedienungsanleitung
Mitox
Mitox 415CSX PREMIUM Bedienungsanleitung
Mitox
Mitox 455CSX Bedienungsanleitung
Mitox
Mitox CS260TX Bedienungsanleitung
Mitox
Mitox 4518 Bedienungsanleitung
Mitox
Mitox CS380X Premium Bedienungsanleitung
Mitox
Mitox CS45 SELECT Bedienungsanleitung
Mitox
Mitox CS450X Bedienungsanleitung
Mitox
Mitox 385CSX PREMIUM Bedienungsanleitung
Mitox
Mitox CS38 Bedienungsanleitung
