Mitsubishi Electric GOT1000 GT15 Bedienungsanleitung

User's Manual

GT15-J71GP23-SX

Thank you for purchasing the GOT1000 Series.

GT15 CC-Link IE CONTROLLER

NETWORK COMMUNICATION UNIT

Prior to use, please read both this manual and detailed manual

thoroughly to fully understand the product.

MODEL GT15-J71GP23-SX-U

MODEL

CODE 1D7M76

IB(NA)-0800412-A(0801)MEE

A-1

zSAFETY PRECAUTIONSz

(Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals

introduced in this manual carefully and pay full attention to safety to handle the

product correctly.

The precautions given in this manual are concerned with this product.

In this manual, the safety precautions are ranked as "DANGER" and "CAUTION".

Note that the CAUTION level may lead to a serious accident according to the

circumstances.

Always follow the precautions of both levels because they are important to

personal safety.

Please save this manual to make it accessible when required and always forward

it to the end user.

Indicates that incorrect handling may cause hazardous

conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous

conditions, resulting in medium or slight personal

injury or physical damage.

DANGER

CAUTION

A-2

[DESIGN PRECAUTIONS]

zIf a communication fails in data link, the faulty station holds the data link data

generated before the communication error. Create an interlock circuit in the

sequence program using the communication status information in order that

the system will operate safely.

Failure to do so may cause mis-outputs or malfunctions, resulting in

accidents.

Check the faulty station and the operation status during communication error

by referring to the relevant manuals.

zSome failures of cable or communication unit may cause the GOT to keep the

outputs on or off.

Create an external circuit for monitoring output signals that may lead to

serious accidents.

Failure to do so may cause mis-outputs or malfunctions, resulting in

accidents.

zIf a communication error (including cable disconnection) occurs during

monitoring, the communication between the GOT and programmable

controller CPU may be interrupted and the GOT may be inoperative.

For bus connection : The programmable controller CPU is down and the

GOT is inoperative.

For other than above: The GOT is inoperative.

When configuring a system including the GOT, the possibility of GOT

communication error must be considered; make sure the operation significant

for the system will be performed by switches on devices other than the GOT.

Failure to do so may cause mis-outputs or malfunctions, resulting in

accidents.

zLaser diodes are used in optical transceivers for the CC-Link IE controller

network. The class of these laser diodes is Class 1.

zDo not install the communication cables together with the main circuit or

power lines, or bring them close to each other. The distance of 100mm

(3.9inch) or more should be ensured. Failure to do so may cause

malfunctions due to noise.

DANGER

CAUTION

A-3

[INSTALLATION PRECAUTIONS]

[WIRING PRECAUTIONS]

zBe sure to shut off all phases of the external power supply used by the system

before mounting or removing this unit to/from the GOT.

Not doing so can cause a unit failure or malfunction.

zUse this unit in the environment given in the general specifications of GT15

User's Manual.

Not doing so can cause an electric shock, fire, malfunction or product damage

or deterioration.

zWhen installing this unit to the GOT, fit it to the connection interface of the

GOT and tighten the mounting screws in the specified torque range.

Undertightening can cause a drop, failure or malfunction.

Overtightening can cause a drop, failure or malfunction due to screw or unit

damage.

zDo not directory touch the conductive part or electronic components of the

unit.

This may cause the unit to fail or malfunction.

zBe sure to shut off all phases of the external power supply used by the system

before wiring.

Failure to do so may cause electric shock, product damage or malfunctions.

DANGER

CAUTION

DANGER

A-4

[WIRING PRECAUTIONS]

[STARTUP AND MAINTENANCE PRECAUTIONS]

zBe careful not to let foreign matter such as dust or wire chips get inside the

unit. This may cause a fire, failure or malfunctions.

zMake sure to securely connect the cable to the connector of unit.

Incorrect connection may cause malfunctions.

zMake sure to fix communication cables and power cables to the unit by ducts

or clamps. Failure to do so may cause damage of the unit or the cables due to

accidental pull or unintentional shifting of the cables, or malfunctions due to

poor contact of the cables.

zDo not hold the cable by hand and pull it out from the unit.

When removing the cable from the unit, make sure to hold the connector by

hand and pull it.

Failure to do so may cause malfunctions or damage to the unit or cable.

zDo not touch the connector while power is on.

Failure to do so may cause electric shock or malfunctions.

zBefore starting cleaning, always shut off GOT power externally in all phases.

Not doing so can cause a unit failure or malfunction.

CAUTION

DANGER

A-5

[STARTUP AND MAINTENANCE PRECAUTIONS]

[DISPOSAL PRECAUTIONS]

[TRANSPORTATION PRECAUTIONS]

zDo not disassemble or modify any unit.

This will cause failure, malfunction, injuries, or fire.

zDo not touch the conductive areas and electronic parts of this unit directly.

Doing so can cause a unit malfunction or failure.

zMake sure to externally shut off all phases of the power supply before

cleaning the unit and retightening unit mounting screws.

Failure to do so may cause the unit to fail or malfunction.

Loose tightening may cause a fall of the unit, short circuits, or malfunctions.

Overtightening may damage the screws and/or the unit, resulting in a fall of

the unit, short circuits or malfunctions.

zMake sure to touch the grounded metal to discharge the electricity charged in

the body, etc., before touching the unit.

Failure to do so may cause a failure or malfunctions of the unit.

zDispose of this product as industrial waste.

zMake sure to transport the GOT main unit and/or relevant unit(s) in the

manner they will not be exposed to the impact exceeding the impact

resistance described in the general specifications of GT15 User's Manual, as

they are precision devices.

Failure to do so may cause the unit to fail.

Check if the unit operates correctly after transportation.

CAUTION

A-6

REVISIONS

* The manual number is noted at the lower right of the top cover.

Print Date *Manual Number Revision

Jan., 2008 IB(NA)-0800412-A First edition

This manual confers no industrial property rights or any rights of any other kind,

nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be

held responsible for any problems involving industrial property rights which may

occur as a result of using the contents noted in this manual.

A-7

CONTENTS

1. Overview ........................................................................................................ 1

2. Specifications ................................................................................................. 1

3. Part Names .................................................................................................... 3

4. Installation Procedure .................................................................................... 6

5. Precautions for Wiring Cables ....................................................................... 8

6. Wiring Method ................................................................................................ 9

7. External Dimensions .................................................................................... 10

A-8

Compliance with the EMC and Low Voltage Directives

When incorporating the Mitsubishi GOT into other machinery or equipment and

keeping compliance with the EMC and low voltage directives, refer to "EMC

AND LOW VOLTAGE DIRECTIVE" of GT15 User's Manual.

The CE logo is printed on the rating plate of the GOT, indicating compliance with

the EMC and low voltage directives.

Packing List

The following items are included.

Model Product Quantity

GT15-J71GP23-SX

CC-Link IE controller network

communication unit 1

Mounting screw set (4 screws, 4 stickers) 1

Extension interface relay board 1

Manuals

The following shows manuals relevant to this product.

For relevant manuals, refer to the manuals in PDF format included in GT

Designer2 and GT Works2.

Detailed Manual

Manual name Manual number

(Model code)

GT15 User's Manual

(Sold separately)

SH-080528ENG

(1D7M23)

GOT1000 Series Connection Manual

(Sold separately)

SH-080532ENG

(1D7M26)

Relevant Manuals

1. Overview

This manual explains the CC-Link IE controller network communication unit

(hereinafter referred to as CC-Link IE communication unit).

The CC-Link IE communication unit allows the GOT1000 series to function as a

normal station on the CC-Link IE controller network.

Refer to GT15 User's Manual for GOT to which this unit can be installed.

2. Specifications

The performance specifications of the CC-Link IE communication unit are

indicated below.

The general specifications of the CC-Link IE communication unit are the same as

those of the GOT.

For the general specifications of the GOT, refer to GT15 User's Manual.

When using the CC-Link IE controller network connection, make the

communication setting to perform communication with programmable

controllers.

For details of the CC-Link IE controller network connection, refer to GOT1000

Series Connection Manual.

Item Specification

Max. link points

per network

LB 32K points (32768 points, 4KB)

LW 128K points (131072 points, 256KB)

LX 8K points (8192 points, 1KB)

LY 8K points (8192 points, 1KB)

Max. link points

per station

LB 16K points (16384 points, 2KB)

LW 16K points (16384 points, 32KB)

LX 8K points (8192 points, 1KB)

LY 8K points (8192 points, 1KB)

Transient transmission

capacity Up to 1920 bytes

Communication speed 1Gbps

Communication method Token ring

Number of stations per

network

Up to 120 stations

(Control station: 1, Normal station: 119) *1

Connection cable Fiber-optic cable (Multi-mode fiber)

( CC-Link IE Controller Network Reference Manual)

Overall cable distance 66000m (When 120 stations are connected)

Station-to-station

distance (Max.) 550m (Core/Clad = 50/125 ( m))

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Electric Konferenzsystem Handbücher

Mitsubishi Electric

Mitsubishi Electric GT15-J71GP23-SX Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A5ND Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric GOT 1000 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric GOT 1000 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MODBUS TCP Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung