Mitsubishi Electric CP-D70DW Bedienungsanleitung

DIGITAL COLOR PRINTER

MODEL

CP-D70DW

CP-D707DW

OPERATION MANUAL

THIS OPERATION MANUAL IS IMPORTANT

TO YOU.

PLEASE READ IT BEFORE USING YOUR

DIGITAL COLOR PRINTER.

CP-D70DW CP-D707DW

Hereby, Mitsubishi Electric Corporation, declares that this digital color printer is in

compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC.

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THISAPPLIANCE TO RAIN

OR MOISTURE.

INFORMATION

This Class A digital apparatus complies with Canadian ICES-003.

CAUTION :

TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended

to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufcient magnitude to constitute the risk of

electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

The “Caution, hot surface” symbol indicates that the marked item may be hot and

should not be touched.

The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including

equipment malfunction) due to static electricity may occur in certain conditions.

The “OFF/ON” symbol indicates connection to or disconnection from the mains, at

least for mains switches.

The “Alternating current” symbol indicates that the equipment is suitable for

alternating current only.

WARNING:

Use the included AC power cord so as not to interfere with radio and television reception.

If you use other cables, it may cause interference with radio and television reception.

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

CAUTION:

Changes or modications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his or her own expense.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

WARNING:

In the USA or Canada, use theAC power cord according to the recommendations as

below, in order to comply with UL60950-1 and CAN/CSA C22.2 No. 60950-1-03.

Connect to the 120 V receptacle of the room or the host equipment.

The AC power cord should be UL or CSAapproved and consist of type SVT, size

16 or 18AWG, length 2 m or shorter cord with IEC60320-1/C13 type, 125 V 10 Aor

higher rating connector and NEMA 5-15 type, 125 V 10 A or higher rating plug.

Use the AC power cord as specied above, so as not to interfere with radio and

television reception.

If you use other cables, it may cause interference with radio and television reception.

WARNING:

In Europe, use the AC power cord according to the recommendations as below, in

order to comply with EN60950-1.

Connect to the 230 V receptacle of the room or the host equipment.

The AC power cord should be VDE approved and consist of core size 0.75 mm2or

bigger, length 2 m or shorter cord with IEC60320-1/C13 type, 250 V 10 A or higher

rating connector and CEE(7)VII type, 250 V 10 A or higher rating plug.

Use the AC power cord as specied above, so as not to interfere with radio and

television reception.

If you use other cables, it may cause interference with radio and television reception.

WARNING:

The socket outlet shall be installed near the equipment and shall be easily accessible.

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or

to the directive 2006/66/EC Article 20 Information for end-users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and

components which can be recycled and/or reused.

This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life,

should be disposed of separately from your household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery

or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:

Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used electrical and electronic products,

batteries and accumulators.

Please, dispose of this equipment, batteries and accumulators correctly at your local community waste

collection/recycling centre.

Please, help us to conserve the environment we live in!

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

CONTENTS

Contents.................................................................................................1

Safety precautions..................................................................................2-4

Special features......................................................................................5

Unpacking...............................................................................................6

Features and functions...........................................................................7-8

Front panel ..............................................................................................7

Rear panel...............................................................................................8

Before operation.....................................................................................9-16

Printer setup procedure...........................................................................9

Positioning of adjustable paper guide .....................................................10

Print paper installation.............................................................................11-12

Ink ribbon installation ..............................................................................13-14

Handling of paper / ink ribbon set ...........................................................15

Connection with USB data signal equipment..........................................16

Printer driver installation..........................................................................16

Error messages and countermeasures ..................................................17-20

Indications on the front panel and countermeasures ..............................17

Overcoming paper jams ..........................................................................18

Repairing a torn ink ribbon ......................................................................19

Before calling for service.........................................................................20

Instructions for transportation..................................................................20

Cleaning .................................................................................................21-22

Specications .........................................................................................23

CONTENTS

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

In the interest of safety, please observe the following precautions:

POWER REQUIREMENT

This Digital Color Printer is designed to operate on 120 V AC 50/60 Hz in the U.S.A. and Canada, and 220 V - 240 V AC 50/60

Hz in Europe. Never connect to any outlet or power supply having a different voltage or frequency.

WARNING : THIS APPARATUS MUST BE EARTHED.

PROTECTIVE MEASURES

IF ABNORMALITIES ARISE, .....

Use of the unit during emission of smoke or abnormal sounds (without adopting countermeasures) is dangerous. In such a case,

unplug the power cord from the source outlet immediately, and request maintenance service from the sales dealer.

NEVER INSERT ANY OBJECT INTO THE UNIT

Foreign objects of any kind inserted into this unit constitute a safety hazard and can cause extensive damage.

DO NOT PLACE ANYTHING ON THE DIGITAL COLOR PRINTER

Heavy objects placed on the Digital Color Printer can cause damage or obstruct proper ventilation.

PROTECT THE POWER CORD

Damage to the power cord may cause re or shock hazard. When unplugging, hold by the plug only and remove carefully.

DO NOT PLACE WATER CONTAINERS ON THE UNIT

Do not place ower vases, and other water-holding containers on the device. If, for some reason, water seeps to the inside of

the unit, unplug the power cord from the source outlet, and contact the sales dealer. If used without corrective measures, the

unit may be damaged.

“In the interest of safety, avoid handling of liquids near the unit.”

DO NOT REMOVE THE CABINET

Touching internal parts is dangerous, besides, it may lead to malfunction. Contact the sales dealer to carry out internal checks

and adjustments. Before opening the cover for eliminating a jammed paper, etc., be sure to disconnect the power cord plug.

UNPLUG THE POWER CORD DURING A LONG ABSENCE

Turn off the main power switch and unplug the power cord during a long absence.

WHEN TRANSPORTING THE UNIT

When transporting the unit, remove the ink ribbon and print paper from the unit. See “INSTRUCTIONS FOR

TRANSPORTATION” on page 20.

WHEN MOVING THE UNIT

Check that the printing unit is closed rmly. And pay attention not to press the OPEN button accidentally. When the printing unit

is not closed rmly or you press the OPEN button accidentally, the printing unit may open. It can cause injury or damage.

BE CAREFUL AROUND PRINT PAPER EXIT SLOT

Don’t insert your hand or any material into the paper exit slot during printing.

Do not touch the cutter blade inside the paper exit slot.

Otherwise, your nger will be injured.

DO NOT TOUCH THE THERMAL HEAD

Do not touch the thermal head (located inside the unit).

They are heated to high temperature and may cause burns or injury when touched.

Also, malfunction caused by static electricity may occur.

WHEN PLACING THE PRINT PAPER, KEEP THE PRINT PAPER UPRIGHT

When you put the print paper sideways on a table, etc., it may roll and fall. This may cause injury.

CONNECTION CABLES

Use the provided power cord.

SAFETY PRECAUTIONS

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

REMOVE THE PAPER STRIP BIN WHEN OPENING OR CLOSING THE DOOR

When you open or close the door with the paper strip bin installed, the bin may be removed and fall. This may cause injury or

damage. Also, the chips generated by margin cut may jam at the paper exit slot.

DO NOT LEAVE THE PRINTING UNIT OPEN

When the printer is moved with the printing unit open, it may cause injury or damage.

CLOSE THE PRINTING UNIT FIRMLY

Take care not to pinch your hand when closing the printing unit. When the printing unit is not closed rmly, it may open during

transportation and it may cause injury or damage.

DO NOT PUSH DOWN ON THE PRINTING UNIT OR THE DOOR

If you push down on the printing unit or the door when they are open, this unit may fall and it can cause damage or injury.

INSTALLATION LOCATIONS

MAINTAIN GOOD VENTILATION

Ventilation slots and holes are provided on the rear and both sides of this unit. Place the unit on a hard and level surface and

keep a space between the unit and the walls to ensure proper ventilation. When putting the unit on the system rack, take a

space between the unit and the back and sides of the rack.

SUITABLE LOCATIONS

Avoid shaky places or hot-springs areas where hydrogen sulde and acidic ions are likely to be generated.

AVOID PLACES WITH HIGH HUMIDITY AND DUST

Do not place the unit at a high humidity and dusty locations. They can cause extensive damage to this unit.Avoid places where

the unit is likely to be exposed to oily fumes and vapors.

AVOID PLACES LIKELY TO BE EXTREMELY HOT

Places exposed to direct sunlight, or near heating appliances can attain extremely high temperatures, which may deform the

cabinet, or can become a prime cause of damage.

PLACES THE UNIT ON A HORIZONTAL LEVEL

The unit is likely to be affected if it is placed in slanted conditions or in an unstable places.

PROTECT AGAINST DEW FORMATION

In extremely cold regions, if the unit is moved quickly from an extremely cold place to warmer one, dew is likely to be formed. If

dew is formed, printing is not possible.

OPERATING AMBIENT TEMPERATURE RANGE

The operating ambient temperature range is 5°C - 40°C (41°F - 104°F) and the humidity of 30% - 80% RH. When using the unit

on the system rack, be sure to keep this ambient temperature inside the rack.

When the printer is used in a low temperature, it may take some time to start printing.

FOR LONG OPERATING LIFE

UNSUITABLE MATERIALS FOR THE DIGITAL COLOR PRINTER

Coat aking and deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or any other solvent, if

rubber or PVC items are left in contact with the unit for extended duration, or if the unit is sprayed with insecticide.

CARE OF THE CABINET

Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry completely before

operating. Never use petroleum base solutions or abrasive cleaners.

HEAD ABRASION

The thermal head, like the video head, wears out. When it is abraded, it becomes hard to print out ne details of the picture. In

such a case, it is necessary to replace the thermal head. Consult with the sales dealer for replacing the head.

CONNECTING DEVICES

Read thoroughly “Operating Precautions” of the instruction booklets for the devices connected with the Digital Color Printer. The

power cord must be disconnected after printing is over.

CAUTION ON RELOCATING

When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a prime cause for damage.

Further, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices.

SAFETY PRECAUTIONS

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

OTHER CAUTIONS

• Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error.

• Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to

extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.

• Depending on the internal temperature, the printer may stop printing temporarily during printing. (The POWER indicator

blinks green.) Please wait for the printer to resume printing.

Do not touch the print paper.

• Each time printing is completed, remove the prints. If the prints are not removed, a paper jam may occur.

• Empty the paper strip bin frequently to prevent jamming the strips at the print outlet.

• The paper tray is used for storing the cut print paper temporarily. The print paper may fall from the tray or may not be stored

in the printed order.

NOTE:

YOUR UNDERSTANDING IS REQUESTED FOR THE LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN

OCCURRENCE OF A MALFUNCTION.

SAFETY PRECAUTIONS

Securing band

(supplied)

Cautions to prevent the printer from falling

CAUTION

Falling this printer due to shock or other reasons

may cause injury.

For your safety, make sure to secure the printer

by the following procedure when you decide the

location of installation of the printer.

1. Secure the securing band (supplied) to the printer

with the screw (supplied).

2. Secure the other side of the securing band to the

installation location with the round head wood

screw (supplied).

Screw (supplied) Round head wood screw

(supplied) Washer

(supplied)

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

SPECIAL FEATURES

AVAILABLE 5 PRINT SIZES

5 printing sizes, 9x13 (3.5x5”) (max. 89 x 127 mm), 10x15 (4x6”) (max. 102 x 152 mm), 13x18 (5x7”) (max. 127 x 178 mm),

15x20 (6x8”) (max. 152 x 203 mm) and 15x23 (6x9”) (max. 152 x 229 mm), are selectable.

300 DPI HIGH RESOLUTION

CP-D70DW and CP-D707DW have a high resolution of 300 dpi for precise illustrations and sharp photographic images.

LARGE CAPACITY PRINTING

Maximum of 450 prints per roll for 9x13 (3.5x5”) is offered (CP-D70DW). Large economical print capacity per roll reduces

frequency of exchanging paper and ink ribbon.

HIGH QUALITY PRINTS

CP-D70DW and CP-D707DW are dye sublimation thermal transfer color printers, which produce superior high quality images.

They also produce a continuous tone at 256 gradient for each of Y, M, and C.

HIGH SPEED PRINTING

DOUBLE-DECK SYSTEM (CP-D707DW)

The double-deck system printer is capable of high speed printing for up to 450x2 prints of 9x13 (3.5x5”)-size paper.

HI-SPEED USB (VER. 2.0) INTERFACE SUPPORTING

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

UNPACKING

Take the printer out of the box by the following procedures. Make sure to check the accessories.

CONTENTS

The accessories items are placed in the top cushion. Check all items are included.

Quick setup

guide

Paper strip bin

CD-ROM

Paper anges Spacers

Power cords

Ink cassette

Make sure to remove the protective

materials from the ink cassette and

paper anges.

Open the printer box from the top and remove

the top cushion containing the accessories out

of the box.

Remove the protective cardboard and then take the accessories

out of the cushion.

Carefully pull the printer up and out of the box.

Pull the printer straight up as shown in the gure.

NOTE

Printer weighs about 12 kg for a single-deck (CP-D70DW) or

22 kg for a double-deck (CP-D707DW). Handle them with care.

Handling the double-deck system (CP-D707DW) will require

two adults.

Unwrap the packing.

Remove the protective materials for transportation such as

protective sheet.

Remove the paper strip bin before carrying the printer.

Hold the printer by the front and rear handle as illustrated in the

drawing.

CAUTION

• Do not carry the printer with the paper strip bin attached and

by holding the part under the paper strip bin. The paper strip

bin may be removed and fall. It may cause injury or damage.

• When the printing unit is not closed rmly or you press the

OPEN button accidentally, the printing unit may open. It can

cause injury or damage.

CP-D70DW CP-D707DW

Cable ties Securing band

Screws, Washer Paper tray

(CP-D70DW 1

CP-D707DW 2)

CP-D70DW : 1 set

CP-D707DW : 2 sets

Each set is stored in the respective printing units.

Protective

cardboard Accessories

OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-

SHOOTING CONTENTS

FEATURES AND FUNCTIONS

FRONT PANEL

PAPER STRIP BIN

Holds the paper strips generated by margin cut. Empty

the bin frequently to prevent jamming the strips at the

print outlet.

NOTE

Remove the bin before opening the door. If the door

is opened with this bin attached, the printer or this

bin may be damaged. Do not remove the bin during

printing. It may cause a malfunction.

CONNECTOR COVER

Do not open the cover during normal use.

ALARM INDICATOR ( )

This indicator illuminates or blinks when a paper jam

occurs or the door is open. See page 17.

PAPER RIBBON INDICATOR ( )

When an error concerning the ink ribbon or print paper

occurs, this indicator illuminates or blinks. See page

17.

CP-D70DW CP-D707DW

POWER INDICATOR ( )

When the power is turned on, the indicator illuminates.

It normally illuminates green, however, blinks or

illuminates orange depending on the printer status. See

page 17.

PRINT OUTLET

The printed paper comes out here.

OPEN BUTTON ( )

Press to release the printing unit out.

PRINTING UNIT

Open to load print paper or ink ribbon. Press the

OPEN button to release the printing unit.

DOOR

Open the door to mount print paper.

OPENING THE DOOR

Pull out the printing unit by pressing the OPEN button

and then pull the knob to open the door.

Printing unit Door

Knob

Andere Handbücher für CP-D70DW

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Electric Drucker Handbücher

Mitsubishi Electric

Mitsubishi Electric CP-30DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP9500DW-S Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-30DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Smart D90RT Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP9550DW-S Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-D707DW-S Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-W5000DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP9000DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP9820DW-S Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP30W Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-D707DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-M15 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric SmartD90EV Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-3020DAU Konfigurationshandbuch

Mitsubishi Electric

Mitsubishi Electric P-95DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-K60DW-S Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP30W Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-D90DW-SL Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP9800DW-S Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-D2E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP9000DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP-30DW Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CP3020DE Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric P95DW-DC Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung