Mitsubishi Electric WD-73C11 Installationsanleitung

3D DLP

™HOME-CINEMA TELEVISION

MODELS

WD-73640

WD-73C11

WD-73CA1

BASIC OWNER’S GUIDE

This manual provides basic connection, setup, and operating instructions. For use of additional fea-

tures of this television, please visit our website at www.Mitsubishi-tv.com to view or download a sup-

plemental Owner’s Guide. Follow the Support link to the Product Documents page.

• For questions:

- Visit our website at www.mitsubishi-tv.com.

- E-mail us at TVSupport@mevsa.com.

- Call Consumer Relations at 800-332-2119 for operational or connection assistance.

• For information on System Reset, please see the back cover.

• To order replacement or additional remote controls, visit our website at www.mitsuparts.com or call

800-553-7278.

For assistance call 1(800) 332-2119

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

This apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such as vases,

shall be placed on the apparatus.

Cet appareil ne doit pas être exposé à des gouttes ou

à des éclaboussures et aucun objet rempli d’un liquide,

comme un vase, ne doit être placé sur l’appareil.

WARNING: This product contains chemicals known

to the State of California to cause cancer and/or birth

defects or other reproductive harm.

TV WEIGHT: This TV is heavy. Exercise extreme care

when lifting or moving it. Lift or move the TV with a

minimum of two adults. To prevent damage to the TV,

avoid jarring or moving it while it is turned on. Always

power off your TV, unplug the power cord, and disconnect

all cables before moving it.

Stand Requirement

CAUTION: Use these Mitsubishi TV models only with the

Mitsubishi stand model shown here. Other stands can

result in instability and possibly cause injury.

TV Model Stand Model

WD-73640, WD-73C11, WD-73CA1 MB-S73A

MAINS DISCONNECTION: The mains plug is used

as the disconnect device. The mains plug shall remain

readily operable.

FCC Declaration of Conformity

Product: Projection Television Receiver

Models: WD-73640

WD-73C11

WD-73CA1

Responsible

Party:

Mitsubishi Electric Visual Solutions

America, Inc.

9351 Jeronimo Road

Irvine, CA 92618-1904

Telephone: 1 (800) 332-2119

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursu-

ant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

the receiver.

- Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV techni-

cian for help.

Changes or modifications not expressly approved by

Mitsubishi could cause harmful interference and would

void the user’s authority to operate this equipment.

The lightning flash with arrowhead symbol within an

equilateral triangle is intended to alert the user of the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important oper-

ating and maintenance (servicing) instructions in the

literature accompanying the product.

Custom cabinet installation must allow for proper air

circulation around the television.

Canadian Notice

For Model WD-73CA1

This Class B digital apparatus complies with Cana-

dian ICES-003.

Cet appareil numérique de la classe B est conforme

à la norme NMB-003 du Canada.

Note: Features and specifications described in this

owner’s guide are subject to change without notice.

TV Software

Do not attempt to update the software of this TV with

software or USB drives not provided by or authorized by

Mitsubishi Electric Visual Solutions America, Inc. Non-

authorized software may damage the TV and will not be

covered by the warranty.

Children and TV Viewing

The American Academy of Pediatrics discourages televi-

sion viewing for children younger than two years of age.

For assistance call 1(800) 332-2119

Contents

Important Safety Instructions ................ 4

1 Basic Setup and Operation

Package Contents ....................... 5

Installing the Remote Control Batteries......... 5

TV Overview ........................... 5

Before You Begin ........................ 5

Remote Control ......................... 6

Setting Up and Using TV Inputs .............. 7

Basic TV Operation....................... 9

TV Menus ............................ 12

2 TV Connections

Before You Begin ....................... 13

Connection Types and Audio/Video Quality .... 13

Input and Output Jacks................... 14

Connection Diagrams .................... 15

3 TV Features

FAV (Favorites) ......................... 19

Sleep Timer ........................... 19

ChannelView Channel Listings .............. 20

3D Video ............................. 21

Appendices

Appendix A: Auto Input Sensing ............ 24

Appendix B: TV Care .................... 25

Appendix C: Troubleshooting .............. 28

Mitsubishi TV Software.................... 32

Warranty .............................. 36

NOTE TO CATV SYSTEM INSTALLER:

THIS REMINDER IS

PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S ATTEN-

TION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES

GUIDELINES FOR THE PROPER GROUNDING AND, IN PARTIC-

ULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CON-

NECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS

CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.

Lamp Replacement

For lamp-replacement instructions, see Appendix B.

To Order a Replacement Lamp Under Warranty

Visit our website www.mitsuparts.com or call

(800) 553-7278. Please have television model number,

serial number, and proof of purchase available.

To Order a Replacement Lamp After Warranty

Visit our website at www.mitsuparts.com or call

(800) 553-7278. Please have the television model

number available. Order new lamp part number

915B455011.

For assistance call 1(800) 332-2119

Important Safety Instructions

Please read the following safeguards for your TV and

retain for future reference. Always follow all warnings

and instructions marked on the television.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart,

stand, tripod, bracket,

or table specified

by the manufacturer,

or sold with the

apparatus. When

a cart is used, use

caution when moving

the cart/apparatus

combination to avoid

injury from tip-over.

13) Unplug this apparatus

during lightning storms or when unused for long

periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

ANTE NNA

LEAD IN WIRE

ANTE NNA

DIS CHAR G E UNIT

(NE C AR TIC LE 810-20)

GROUNDING

CONDUCTORS

(NEC ARTICLE 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NE C AR T 250, PAR T H)

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

NEC — NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING

Outdoor Antenna Grounding

If an outside antenna or cable system is connected

to the TV, be sure the antenna or cable system is

grounded so as to provide some protection against

voltage surges and built-up static charges.

Replacement Parts

When replacement parts are required, be sure the

service technician has used replacement parts speci-

fied by the manufacturer or have the same character-

istics as the original part. Unauthorized substitutions

may result in fire, electric shock or other hazards.

For assistance call 1(800) 332-2119

Basic Setup and Operation

Installing the Remote Control

Batteries

Remove the remote control’s back cover by

gently pressing in the tab and lifting off the cover.

Load the batteries, making sure the polarities

(+) and (-) are correct. For best results, insert

the negative (-) end first.

Snap the cover back in place.

The remote

control

requires two

AA batteries.

Package Contents

Please take a moment to review the following list of

items to ensure that you have received everything.

TV Overview

Remote

Control

Two AA

Batteries

Basic

Owner’s

Guide

Quick

Setup

Guide

Product

Registration

Card

Before You Begin

Review the important safety, installation, and oper-

ating information at the beginning of this book.

Choose a location for your TV.

• See the stand requirements on page 2.

• Allow at least four inches of space on all sides

of the TV to help prevent overheating. Over-

heating may cause premature failure of the TV.

• Avoid locations where light may reflect off the

screen.

Install the batteries in the remote control.

Plug the TV into an AC power outlet.

TV Control Panel

Buttons on the control panel duplicate some keys on

the remote control.

To display the main menu, press

INPUT

and

VOL+

simul-

taneously for about 10 seconds. Press and hold

INPUT

and

VOL+

for 10 seconds to clear the menu.

System Reset

If the TV fails to respond to the remote control, the

control-panel buttons, or will not power on/off, perform

System Reset. Press and hold the

POWER

button on the

control panel for ten seconds.

Sample TV controls and

location of the STATUS

indicator. See page 31.

Rear Connection

Jacks

Lamp-Compartment

Door

61. Basic Setup and Operation

For assistance call 1(800) 332-2119

Remote Control

Powers TV on or off.

Number/letter keys

Channel tuning, page 8

Pass-code entry

Sleep Timer, page 19

GUIDE

ChannelView channel listings. Set the

TV clock to receive correct updates.

INFO

TV status

or TV help (page 11)

MUTE

Mutes the TV speakers.

TOOLS

Not used in this model.

VOL

Controls volume of TV speakers.

PAGE

Changes channels; moves to another

page in a menu or list.

Adds a separator in digital channel

numbers. Clears some menu entries.

AUDIO

Audio settings

VIDEO

Video settings

Displays or clears the TV main

menu (page 12).

In menus,

steps back one menu.

EXIT

Clears all menus and on-screen

displays.

LAST

Returns to the previous channel.

ENTER

Selects a channel number or menu item.

Navigation and adjustment controls

FAV

Displays up to nine favorite

sources, page 19.

FORMAT

Changes picture shape, page

FREEZE

Freezes a broadcast TV picture

INPUT

Press to select a TV input,

page 8.

Aim the remote control at the TV screen. The

TV can detect control signals over the entire

screen area.

1. Basic Setup and Operation 7

For assistance call 1(800) 332-2119

Install batteries in the remote control. See page 5.

Aim the emitter (bulb)

end of the remote control

at the TV and press the

POWER

key .Wait for the

Welcome screen.

If you wish to change the

menu language to Español,

press then

ENTER

Press to move to the

energy-mode selections.

Select Home.

Press to highlight

EXIT.

Press

ENTER

to clear the menu.

First-Time Power-On

Setting Up and Using TV Inputs

Welcome Screen Energy Options

• Mitsubishi recommends the Home setting,

which produces a picture suitable for home

viewing and uses less power.

• The Retail setting looks best under the bright

lighting often found in commercial settings. In

this mode, the TV uses more power than when

in the Home setting.

This table compares energy choices offered in the

Welcome screen.

Home Retail

Picture Mode Bright

Brilliant

Lamp Energy

Standard Bright

• Use the Picture > Video menu to change the

Picture Mode.

• Use the Setup > Energy menu to change

Lamp Energy.

The ANT (Antenna) Input

If using an antenna or direct cable service (no cable

box), connect the incoming coaxial cable to the TV’s

ANT

input. Refer to page 16.

You must perform a channel scan to enable recep-

tion of digital channels. If you skip this step, the TV

can receive only analog channels. The channel scan

will search for high-definition and standard-definition

channels available in your area. Note: Direct cable

service will not include scrambled or premium chan-

nels.

Memorizing Channels with Channel Scan

Power on the TV.

Press

and open the Setup > Channel menu.

Start channel memorization from the Setup > Channel

menu.

Press to enter the menu.

Highlight Ant Air if connected to an

over-the-air antenna. Highlight Ant

Cable for service over direct cable

(no cable box). Press

ENTER

to add a

check.

Select the scan type.

• For first-time setup, highlight All channels.

• To scan for channels not already in memory,

highlight Add only new channels. Press

ENTER

to add a check.

Highlight Scan and press

ENTER

Channel memorization may take up

to 15 minutes to complete.

To stop channel memorization before completion,

press

CANCEL

At any time after Channel Scan,

• Use the Setup > Channel > Edit menu to add or

delete individual channels from memory.

• Repeat the All channels scan if you reposition the

antenna or move the TV to a new geographic area

with a different channel line-up.

81. Basic Setup and Operation

For assistance call 1(800) 332-2119

Setting Up Inputs with Auto Input Sensing

Connection information starts on page 13. Learn more

about Auto Input Sensing on page 24.

Power on the TV.

Power on the devices to ensure detection.

Connect one device to the TV, making note of the

TV input jack.

The TV will display the New Device Found screen if

the connection type is detectable.

Highlight the device type in the on-screen list and

press

ENTER

. The name you select here will appear

in the Input Selection menu.

Sample New Device Found screen.

Press

EXIT

to close the New Device Found screen.

Repeat the preceding steps for each additional

device you want to add.

Setting Up and Using TV Inputs, continued

More About the Input Selection Menu

• To assign helpful names to the icons, see the

Inputs > Name menu.

• To remove unwanted Antenna or HDMI device icons

from the Input Selection menu, see the Inputs >

Name menu.

• To rearrange the icons, use the Inputs > Order

menu.

Detailed information on using these menus

is in the supplemental Owner’s Guide at

www.mitsubishi-tv.com.

Selecting an Input to Watch

Press

INPUT

Press and to highlight an

input icon.

Sample Input Selection menu, DVD input selected

Press

ENTER

to switch to the input.

Note: In most cases, to see a named icon for a con-

nected device (as in the samples), you must ﬁrst

assign a name either

• When the device is first connected and the

New Device Found menu offers a choice

of names.

• By using the Inputs > Name menu to

assign or change a name at any time after

the TV has detected the connection.

Watching Broadcast TV

TV Connected to an Antenna or Direct Cable

Service (no cable box)

Note: Perform channel memorization to enable recep-

tion of digital channels. See page 7.

Press

INPUT

to display the Input Selection menu.

Highlight the antenna or cable icon and press

ENTER

Sample Input Selection menu, antenna input selected

To tune to a channel from the

ANT

input, use any of

these methods.

• Enter the channel number using the number

keys on the remote control and press

ENTER

For a two-part digital channel, such as 3-1,

press

—

CANCEL

ENTER

• Press

to change channels one channel at

a time.

• Press and hold

to speed through channels.

• Press

LAST

to return to the previous channel.

• Use the Fav (Favorites) feature to tune to up to

nine favorite channels. See page 19.

• Press

GUIDE

to display ChannelView channel

listings. Highlight a channel number, then

press

ENTER

to tune.

• Set up ChannelView custom channel banks

and use the

key to tune within predefined

groups of channels.

1. Basic Setup and Operation 9

For assistance call 1(800) 332-2119

Basic TV Operation

Picture Settings

To get the best picture under different viewing condi-

tions, set the Picture Mode first before changing other

video settings.

Press

VIDEO.

Press until the Picture Mode

option displays.

Press to make one of these selections:

Name When to Use

Brilliant

Under very bright lighting

Game

With gaming consoles (inputs

named

Game

only)

Bright For most daytime viewing

Natural For most nighttime viewing

Press to display the name of another adjustment.

Press to make the adjustment.

Wait a few seconds and the display will clear.

More picture adjustments can be found in these menus:

• Picture > Video

• Picture > Picture Plus

• Picture > 3D Mode (page 21)

Audio Controls

Controlling Sound Volume

Press

VOL

to adjust the sound level of

the TV speakers.

Changing Audio Settings (TV Speakers Only)

Press

AUDIO

Press to display the name of the

adjustment you want.

Press to change.

Using an External Sound System

To switch from the internal TV speakers to an external

sound system:

Press

AUDIO

Press to display the TV Speakers option.

Press to select either On (to hear sound from

the TV speakers) or Off (to hear sound from an

external sound system).

See page 17 for suggestions on connecting your sound

system to the TV.

Disconnecting an A/V Receiver

When you disconnect an A/V receiver, change the TV

Speakers setting to On to hear sound from the TV

speakers. Use the Sound > Audio > TV Speakers

menu.

HDMI Control (CEC-Enabled HDMI A/V Receiver)

The TV’s remote control may control some functions of

the A/V receiver. See the supplemental Owner’s Guide

at www.mitsubishi-tv.com.

10 1. Basic Setup and Operation

For assistance call 1(800) 332-2119

Basic TV Operation, continued

The FORMAT Key and Picture Shape

Important

Black bars at the edges of

the screen are common in HD

pictures. Black bars are not a

defect of the TV.

• Broadcasters add black bars

to fill the 16:9 screen area while

preserving the original aspect

ratio of older material not created

for modern HD TVs.

• Your cable box, satellite receiver,

or other device may also have

controls for altering the shape

of the broadcast picture. If your

device offers output in native

format, try using it with the TV

picture formats.

Sample Uses of the

FORMAT

Key

You can use the

FORMAT

key to display the image as originally intended or

to reduce or eliminate black areas at the edges.

Press

High-definition signal with

squarish 4:3 image embedded.

The image is narrower than the

16:9 screen; unused areas at

the sides are filled with black.

Wide Expand mode stretches

the picture sideways to fill the

screen.

Press

Standard 2.35:1 anamorphic

DVD image; unused areas at

the top and bottom are filled

with black (letterbox effect).

Zoom mode. The picture fills

the screen. All four edges are

cropped in this mode.

Press the

FORMAT

key

o cycle through picture

shapes for the current

image. The TV will

remember the format you

last used on each input.

For more on TV formats and signal

types, see the supplemental Owner’s

Guide at www.mitsubishi-tv.com.

More TV Features

See the supplemental Owner’s Guide at

www.mitsubishi-tv.com for more on these and other

topics.

• Parental controls (Lock menu). Requires first

setting a pass code.

• TV Clock (Setup > Clock menu). Set the TV Clock if

you plan to use the TV Timer, ChannelView channel

listings, or the TV’s

Lock by Time

feature.

• Changing input names in the Input Selection menu

(Inputs > Name menu)

• HDMI (CEC) control of other A/V devices

• Using the TV with a computer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Electric Projektionsfernsehen Handbücher

Mitsubishi Electric

Mitsubishi Electric WD-52526 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-60C10 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WT-42313 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-57831 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WS-73513 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-60735 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WS-48315 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric VS-50111 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-52327 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WS-48515 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 3D DLP 742 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric DLP WD-52631 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-73727 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-52525 Installationsanleitung

Mitsubishi Electric

Mitsubishi Electric VS-50111 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WT-42311 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WT-46807 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-52525 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-52631 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-60C10 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-52525 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WS-55517 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-60735 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WS-A48 Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Sony

Sony KP-57WS500 - 57" Hi-scan 1080i™ 16:9 Projection... Benutzerhandbuch

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Sony

Sony KP-51DS1U Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Sony

Sony GRAND WEGA KDF-55XS955 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung

Toshiba

Toshiba 42HM66 - 42" Rear Projection TV Bedienungsanleitung