Mitsubishi Electric MELSEC-F FX2N-32DP-IF Bedienungsanleitung

USER’S MANUAL

FX2N-32DP-IF Profibus-DP Interface Unit

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the

correct installation and operation of the FX2N-32DP-IF Profibus-DP Interface Unit. It should

be read and understood before attempting to install or use the unit.

• Further information can be found in the FX2N Series and FX0/FX0N Series Hardware

Manual, manuals for special function units/blocks and Profibus-DP master CPUs.

• If in doubt at any stage during the installation of the FX2N-32DP-IF Profibus-DP Interface

Unit always consult a professional electrical engineer who is qualified and trained to the

local and national standards.

• If in doubt about operation or use of the FX2N-32DP-IF Profibus-DP Interface Unit please

consult your local Mitsubishi Electric representative.

• This manual is subject to change without notice.

FX2N-32DP-IF Profibus-DP Interface Unit

FX2N-32DP-IF Profibus-DP

Interface Unit

User’s Manual

This manual confers no industrial property rights or any rights of any other kind, nor does it confer any

patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving

industrial property rights which may occur as a result of using the contents noted in this manual.

Manual number : JY992D79401

Manual revision : F

Date : December 2013

FX2N-32DP-IF Profibus-DP Interface Unit

iii

Guidelines for the Safety of the User and Protection of the FX2N-32DP-IF

Profibus-DP Interface Unit.

This manual provides information for the use of the FX2N-32DP-IF Profibus-DP Interface Unit.

The manual has been written to be used by trained and competent personnel. The definition of

such a person or persons is as follows:

a) Any engineer who is responsible for the planning, design and construction of automatic

equipment using the product associated with this manual should be of a competent

nature, trained and qualified to the local and national standards required to fulfill that

role. These engineers should be fully aware of all aspects of safety with regards to

automated equipment.

b) Any commissioning or service engineer must be of a competent nature, trained and

qualified to the local and national standards required to fulfill that job. These engineers

should also be trained in the use and maintenance of the completed product. This

includes being completely familiar with all associated documentation for the said product.

All maintenance should be carried out in accordance with established safety practices.

c) All operators of the completed equipment should be trained to use that product in a safe

and coordinated manner in compliance to established safety practices. The operators

should also be familiar with documentation which is connected with the actual operation

of the completed equipment.

Note : the term ‘completed equipment’ refers to a third party constructed device which

contains or uses the product associated with this manual.

Notes on the Symbols Used in this Manual

At various times through out this manual certain symbols will be used to highlight points of

information which are intended to ensure the users personal safety and protect the integrity of

the equipment. Whenever any of the following symbols are encountered its associated note

must be read and understood. Each of the symbols used will now be listed with a brief

description of its meaning.

Hardware Warnings

1) Indicates that the identified danger WILL cause physical and property damage.

2) Indicates that the identified danger could POSSIBLY cause physical and property

damage.

3) Indicates a point of further interest or further explanation.

Software Warnings

4) Indicates special care must be taken when using this element of software.

5) Indicates a special point which the user of the associate software element should

be aware of.

6) Indicates a point of interest or further explanation.

FX2N-32DP-IF Profibus-DP Interface Unit

• Under no circumstances will Mitsubishi Electric be liable responsible for any consequential

damage that may arise as a result of the installation or use of this equipment.

• All examples and diagrams shown in this manual are intended only as an aid to

understanding the text, not to guarantee operation. Mitsubishi Electric will accept no

responsibility for actual use of the product based on these illustrative examples.

• Please contact your local Mitsubishi Electric representative for more information concerning

applications in life critical situations or high reliability.

Registration

The company name and the product name to be described in this manual are the registered

trademarks or trademarks of each company.

Table of Contents

Guideline of Safety .............................................................................. iii

1. Introduction............................................................................................1-1

1.1 Features of the 32DP-IF ...................................................................................... 1-1

1.2 External Dimensions and Each Part Name ......................................................... 1-2

1.2.1 Pin Configuration ....................................................................................................... 1-3

1.3 System Configuration .......................................................................................... 1-4

1.3.1 Connected Programming Tools................................................................................. 1-4

1.3.2 Connected Extension Units/Blocks ........................................................................... 1-5

1.3.3 Configuration Rules................................................................................................... 1-7

1.3.4 Example Configuration ............................................................................................ 1-20

2. Mounting................................................................................................2-1

2.1 Mounting Arrangements ...................................................................................... 2-1

2.2 Mounting.............................................................................................................. 2-2

2.2.1 DIN Rail Mounting ..................................................................................................... 2-2

2.2.2 Direct Mounting to Back Walls .................................................................................. 2-2

3. Wiring ....................................................................................................3-1

3.1 Caution for Wiring ................................................................................................ 3-1

3.2 Power Supply ...................................................................................................... 3-3

3.2.1 AC Power Supply Type: FX2N-32DP-IF .................................................................... 3-3

3.2.2 DC Power Supply Type: FX2N-32DP-IF-D ................................................................ 3-4

3.3 Profibus-DP Network ........................................................................................... 3-5

3.4 Input in Extension Units/Blocks ........................................................................... 3-6

3.4.1 DC Sink Input ............................................................................................................ 3-6

3.4.2 DC Source Input........................................................................................................ 3-7

3.4.3 AC Input .................................................................................................................... 3-8

3.5 Output in Extension Units/Blocks ........................................................................ 3-9

3.5.1 Relay Output ............................................................................................................. 3-9

3.5.2 Transistor Output..................................................................................................... 3-10

3.6 Special Function Units/Blocks .......................................................................... 3-10

4. Specifications ........................................................................................4-1

4.1 General Specifications......................................................................................... 4-1

4.2 Power Supply Specifications ............................................................................... 4-2

4.3 Performance Specifications................................................................................. 4-2

5. Advanced Devices.................................................................................5-1

5.1 Data Registers..................................................................................................... 5-1

5.1.1 Example of Allocating Device.................................................................................... 5-2

5.2 Diagnostic Devices (Special Devices) ................................................................. 5-3

5.2.1 32DP-IF Status (M8000 ~ M8009 and D8000 ~ D8009) ........................................... 5-4

5.2.2 Clock Devices (D8010 ~ D8019) ............................................................................... 5-5

5.2.3 Profibus-DP Network Status (M8020 ~ M8039 and D8020 ~ D8039) ....................... 5-6

5.2.4 Configuration Status (M8040 ~ M8059 and D8040 ~ D8059) ................................. 5-10

5.2.5 Error Status (M8060 ~ M8069 and D8060 ~ D8069) .............................................. 5-11

FX2N-32DP-IF Profibus-DP Interface Unit

6. Address Setting .....................................................................................6-1

6.1 Setting the Address ............................................................................................. 6-1

6.2 Example Address Setting .................................................................................... 6-1

7. User Parameter .....................................................................................7-1

7.1 User Parameter Rules ......................................................................................... 7-1

7.2 Default User Parameter ....................................................................................... 7-6

7.2.1 Exchanged Data by Default User Parameter ............................................................ 7-9

7.2.2 Exchanged Data Process by Simple Communication Interface .............................. 7-12

7.3 Configuring Slave Parameter ............................................................................ 7-13

7.3.1 Configuring Slave Parameter by GSD file ............................................................... 7-13

8. Diagnostic Message ..............................................................................8-1

8.1 Diagnostic Message Frame ................................................................................. 8-1

8.2 Diagnostic Message Contents List ...................................................................... 8-1

9. Diagnostics............................................................................................9-1

9.1 Preliminary Checks.............................................................................................. 9-1

9.2 Check the Status of the LEDs of the 32DP-IF ..................................................... 9-2

9.3 Check Error Status of the 32DP-IF ...................................................................... 9-3

9.3.1 Error Status in D8029 ................................................................................................ 9-3

9.3.2 Error Flags................................................................................................................. 9-4

9.3.3 Error Code .................................................................................................................9-5

Appendix A

Example Parameter and Configuration on ProfiMap................................ A-1

A-1: System Configuration ..........................................................................................A-1

A-2: Set System Configuration with ProfiMap .............................................................A-2

A-3: Set User Parameter with ProfiMap ......................................................................A-5

Appendix B

Example Parameter and Configuration on GX-Configurator-DP.............. B-1

B-1: System Configuration ..........................................................................................B-1

B-2: Set System Configuration with GX-Configurator-DP ...........................................B-2

B-3: Set User Parameter with GX-Configurator-DP ....................................................B-5

FX2N-32DP-IF Profibus-DP Interface Unit

vii

Appendix C

User Parameter ........................................................................................ C-1

C-1: General Parameter (Global User Parameter) ..................................................... C-1

C-2: User Parameter for Special function block ......................................................... C-3

C-2-1: FX2N-4AD Extension Configuration (Intel Format)................................................... C-3

C-2-2: FX2N-4AD Extension Configuration (Motorola Format)............................................ C-7

C-2-3: FX2N-4AD Short Configuration (Intel Format) ........................................................ C-11

C-2-4: FX2N-4AD Short Configuration (Motorola Format)................................................. C-13

C-2-5: FX2N-4DA Extension Configuration (Intel Format)................................................. C-15

C-2-6: FX2N-4DA Extension Configuration (Motorola Format).......................................... C-18

C-2-7: FX2N-4DA Short Configuration (Intel Format) ........................................................ C-21

C-2-8: FX2N-4DA Short Configuration (Motorola Format)................................................. C-23

C-2-9: FX2N-4AD-PT Extension Configuration .................................................................. C-25

C-2-10:FX2N-4AD-PT Short Configuration ........................................................................ C-27

C-2-11:FX2N-4AD-TC Extension Configuration (Intel Format) .......................................... C-28

C-2-12:FX2N-4AD-TC Extension Configuration (Motorola Format) ................................... C-30

C-2-13:FX2N-4AD-TC Short Configuration (Intel Format) ................................................. C-32

C-2-14:FX2N-4AD-TC Short Configuration (Motorola Format) .......................................... C-34

C-2-15:FX2N-1HC Extension Configuration ...................................................................... C-36

C-2-16:FX2N-1HC Short Configuration.............................................................................. C-38

C-2-17:FX2N-1PG (Intel Format) ....................................................................................... C-40

C-2-18:FX2N-1PG (Motorola Format) ................................................................................ C-44

C-2-19:FX2N-232IF (Intel Format) ..................................................................................... C-47

C-2-20:FX2N-232IF (Motorola Format) .............................................................................. C-49

C-2-21:FX2N-32ASI-M ....................................................................................................... C-51

C-2-22:FX0N-3A................................................................................................................. C-52

C-2-23:FX2N-2AD .............................................................................................................. C-52

C-2-24:FX2N-2DA .............................................................................................................. C-52

C-2-25:FX2N-10GM, FX2N-20GM ..................................................................................... C-53

C-2-26:FX2N-2LC (Intel Format) ........................................................................................ C-54

C-2-27:FX2N-2LC (Motorola Format)................................................................................. C-56

C-2-28:FX2N-8AD (Intel Format)........................................................................................ C-58

C-2-29:FX2N-8AD (Motorola Format) ................................................................................ C-61

C-2-30:FX2N-10PG (Intel Format) ..................................................................................... C-64

C-2-31:FX2N-10PG (Motorola Format) .............................................................................. C-68

C-2-32:FX2N-10PG (Intel Format) - Using 6W-IF - ............................................................ C-72

C-2-33:FX2N-10PG (Motorola Format) - Using 6W-IF -..................................................... C-75

C-2-34:Simple Communication 3W-IF (Intel Format/Motorola Format)............................. C-79

C-2-35:Simple Communication 6W-IF (Intel Format/Motorola Format)............................. C-80

C-2-36:Simple Communication 9W-IF (Intel Format/Motorola Format)............................. C-81

C-2-37:Simple Communication 12W-IF (Intel Format/Motorola Format) ........................... C-82

C-2-38:Simple Communication 15W-IF (Intel Format/Motorola Format) ........................... C-84

C-2-39:8 Bit Input............................................................................................................... C-85

C-2-40:8 Bit Output............................................................................................................ C-85

Appendix D

Update History of FX2N-32DP-IF and GSD File ....................................... D-1

Appendix E

Further Information Manual Lists.............................................................. E-1

FX2N-32DP-IF Profibus-DP Interface Unit

viii

Andere Mitsubishi Electric Aufnahmegeräte Handbücher

Mitsubishi Electric

Mitsubishi Electric PAC-USWHS002-WF-1 Service-Handbuch

Mitsubishi Electric

Mitsubishi Electric RD81MES96 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PAC-WHS01WF-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric DX-TL4509E series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric RFID ECL2-V680D1 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric DX-PC25EA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MR-J3-B Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PAC-USWHS002-WF-2 Service-Handbuch

Mitsubishi Electric

Mitsubishi Electric Mac E Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R MES Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric DX-TL4516U series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric RMF-CA100-V1 Kurzanleitung

Mitsubishi Electric

Mitsubishi Electric MAC-587IF-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MAC-334IF-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric ER-1V680D1 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MAC-399IF-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric DX-TL900U Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric DX-TL4516U series Benutzerhandbuch

Mitsubishi Electric

Mitsubishi Electric PAC-IF013B-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PAC-IF011B-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSZ-LN Series Benutzerhandbuch

Mitsubishi Electric

Mitsubishi Electric DX-TL4509E series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Benutzerhandbuch

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch

ADC

ADC Campus-Flex RS Bedienungsanleitung