Mitsubishi Electric 3DC-100S Bedienungsanleitung

3D Starter Pack

MODEL

3DC-100S

OWNER’S GUIDE

For questions:

- Visit our website at www.mitsubishi-tv.com.

- E-mail us at TVSupport@mevsa.com.

- Call Consumer Relations at 800-332-2119 for operational or

connection assistance.

To order replacement or additional remote controls or other

accessories, visit our website at www.mitsuparts.com or call

800-553-7278.

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.

Product: 3D Adapter

Model: 3DC-100S

Responsible

Party:

Mitsubishi Electric

Visual Solutions

America, Inc.

9351 Jeronimo Rd.

Irvine, CA

92618-1904

NOTE: This equipment has been

tested and found to comply with

the limits for a Class B digital

device, pursuant to Part 15 of

the FCC Rules. These limits are

designed to provide reasonable

protection against harmful inter-

ference in a residential installation.

This equipment generates, uses

and can radiate radio frequency

energy and, if not installed and

used in accordance with the

instructions, may cause harmful

interference to radio communi-

cations. However, there is no

guarantee that interference will not

occur in a particular installation.

If this equipment does cause

harmful interference to radio or

television reception, which can

be determined by turning the

equipment off and on, the user is

encouraged to try to correct the

interference by one or more of the

following measures:

• Reorient or relocate the

receiving antenna.

• Increase the separation

between the equipment and

receiver.

• Connect the equipment into

an outlet on a circuit different

from that to which the receiver

is connected.

• Consult the dealer or an expe-

rienced radio/TV technician

for help.

FCC Information

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

8) Only use attachments/accessories specified by the manufacturer.

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been dropped.

Important Safety Instructions

WARNING. To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

For assistance call 1(800) 332-2119

Features

• Converts 3D video originating in several popular formats to checker-

board format for display on your 3D or 3D-ready Mitsubishi television

or 3D-ready Samsung DLP television.

• Processes side-by-side, top-and-bottom, and frame-packing 3D

(e.g., Blu-ray 3D) formats.

• Passes 2D images unaltered for normal display.

• Includes two pairs of active-shutter 3D glasses and matching IR

emitter.

• Compatible with these Mitsubishi television models:

3D-Ready

Televisions

(2007 through

2010)

833 series (2007) L65-A90 (2008) L75-A91 (2010)

C8 series (2008) 737 series (2009) 638 series (2010)

735 series (2008) 837 series (2009) C10 series (2010)

736 series (2008) C9 series (2009)

835 series (2008) L75-A81 (2010)

3D Televisions

(starting in 2010)

738 series (2010) 838 series (2010)

Use and Compatibility

The Mitsubishi 3D Adapter, Model 3DC-100S may be used to display

3D content only when connected to a Mitsubishi 3D-Ready DLP TV,

Samsung 3D –Ready DLP TV or a Mitsubishi 3D TV. When using the

Mitsubishi 3D adapter, a 3D source device connected to the Mitsubi-

shi 3D adapter is required to support the display of 3D games, 3D

broadcasts from terrestrial/cable/satellite and 3D Blu-ray disc content.

Mitsubishi 738 and 838 Series TVs with software version of 012.06 or

higher do not require the use of the adapter for HDMI 1.4a mandatory

3D signals.

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.

650 Series

Tested Model: HL61A650C1F

Other Models:

HL50A650C1F

HL56A650C1F

HL72A650C1F

750 Series

Tested Model: HL61A750A1F

Other Model:

HL67A750A1F

75 Series

Tested Model: HL-T5075S

Other Models:

HL-T4675S

HL-T5675S

76 Series

Tested Model: HL-T6176S

Other Models:

HL-T5076S

HL-T5676S

87 Series

Tested Model: HL-T5687S

Other Models:

HL-T5087S

HL-T6187S

88 Series (not tested)

HL-T7288S

89 Series (not tested)

HL-T5089S

HL-T5689S

HL-T6189S

Samsung 3D Ready DLP TVs

Compatibility with 3DC-100S Adapter

Mitsubishi has tested the 3DC-100S with representative models from

several series of Samsung 3D-Ready DLP HDTVs. Mitsubishi has not

tested all Samsung 3D-Ready DLP HDTV models or series and cannot

guarantee compatibility with non-tested models or series. Samsung

3D-Ready Plasma TVs are not compatible with the 3DC-100S.

The Samsung models listed here are models that have been tested

at the time of printing. Normally all models from the same series will

operate the same way and have the same compatibility.

Mitsubishi continues to test additional models when they are avail-

able. For updates to the list of tested models, please check the

Owner’s Guide for the 3DC-100S on line at www.mitsubishi-tv.com.

For assistance call 1(800) 332-2119

Battery Installation

Emitter

1. Remove the cover.

2. Insert the battery, positive side up. Be sure the

retaining clip holds the battery securely.

3. Reinstall the cover.

To remove the battery,

press on the

retaining clip.

The remote control requires one CR2025 lithium battery.

3D Adapter

IR Sensor

POWER

Light Lit when power is on.

3D STATUS

Light Lit during 3D signal processing.

POWER

Button

Allows manual override of auto on/off. Press to power

off the Adapter if it powers on when not needed,

3D MODE

Button Allows manual selection of 3D format conversion.

Controls and Indicators

POWER

3D MODE

POWER

POWER 3D MODE

3D STATUS

Adapter Remote Control

Lithium Battery Safety

This product uses CR2025 Li/MnO2 lithium coin batteries.

WARNING: Lithium coin cell batteries pose a serious risk of injury if ingested.

Keep cells out of reach of children. If ingested immediately contact a physi-

cian or the National Poison Center at 202-625-3333.

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type (CR2025).

CAUTION: Risk of fire and burns. Do not recharge, disassemble, heat above

100˚C (212˚F), or incinerate. Keep battery out of reach of children.

Disposal. Dispose of used batteries promptly according to local recycling or

waste regulations.

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.

3D GLASSES

EMITTER OUT

3D GLASSES

EMITTER IN

HDMI OUT HDMI IN

5V DC 2A

3D GLASSES

EMITTER OUT

3D GLASSES

EMITTER IN

HDMI OUT HDMI IN

5V DC 2A

3D GLASSES

EMITTER OUT

3D GLASSES

EMITTER IN

HDMI OUT HDMI IN

5V DC 2A

3D GLASSES

EMITTER OUT

3D GLASSES

EMITTER IN

HDMI OUT HDMI IN

5V DC 2A

3D GLASSES

EMITTER OUT

3D GLASSES

EMITTER IN

HDMI OUT HDMI IN

5V DC 2A

GLASSES

EMITTER

HDMI OUT

HDMI IN

3D GLASSES

EMITTER IN

5V DC 2A

3D GLASSES

EMITTER OUT

Emitter

(provided)

AC power adapter

(provided)

HDMI cable

(provided)

HDMI

input

Source device

HDMI cable

DIN cable

(provided)

Step 1.

Step 2.

Step 5.

Step 7.

Step 3.

Step 4. Power on the TV.

Step 6. Power on the source device.

Connecting the Adapter

Connecting a Single 3D Video Source

• Power off all devices prior to connecting the Adapter.

• If the device was in use prior to adding the Adapter, use the same

TV input if possible.

• On a Mitsubishi 833 series TV, the input must be named Game.

• For Samsung TVs, use the input labelled HDMI/DVI. You may need

to name the input PC. See your Samsung owner’s guide for details.

For assistance call 1(800) 332-2119

Connecting Multiple 3D Video Sources

123

HDMI

Pb Pr

INPUT 2

INPUT 1

DIGITAL

AUDIO

OUTPUT

(480i / 480p / 720p / 1080i)

Y/ VIDEO

Pb Pr

Y/ VIDEO

DVI/PC

LR INPUT

AUDIO

GLASSES

EMITTER

ANT

AUDIO

OUTPUT

LAN

A/V

receiver

HDMI

cables HDMI

cables

Adapter

Source

devices

• Connect devices with checkerboard output directly to the TV.

Enable checkerboard output from the devices if needed.

• If using a newer A/V receiver, you may be able to connect devices

to the A/V receiver as shown below. The A/V receiver must support

HDMI 1.4 and 3D video capabilities.

Connecting the Adapter, continued

Notice Concerning Samsung 720p TVs

The adapter is not fully compatible with an A/V receiver when used

with Samsung 720p TVs (models HL-T4675S, HL-T5075S, HL-T5675S).

Always connect the 3D source device directly to the 3DC-100S adapter

if using one of these TV models.

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.

Using the Adapter

Position the emitter where there will be a

clear path to the 3D glasses.

Power on the TV, the 3D video device, and

the 3D glasses.

Note:

The 3D video device must be powered

on before the 3D Adapter can power on.

If the 3D Adapter does not power on automatically when you power

on the 3D video device, press the

POWER

button.

Mitsubishi TV only. If the New Input Found screen displays,

assign a name to the input. If you have an 833 series TV, name the

input Game.

Start video from the 3D video device and wait a few moments for an

image to appear.

Enable the TV’s 3D mode. For a Mitsubishi 833 series TV, 3D set-

tings are in the FX Gaming menu. If you have a Samsung TV, see

the TV owner’s guide.

Select the Adapter’s 3D mode. Press the

3D MODE

button to change.

• For ordinary 2D signals, keep the Adapter powered on and use

3D Mode Normal.

• For automatic detection of HDMI 1.4a 3D signals, use 3D Mode

Normal.

• For non-HDMI 1.4a 3D signals, press the

3D MODE

button

repeatedly until the picture appears correct.

Picture Troubleshooting

Blurry double image,

checkerboard format.

Turn on TV’s 3D mode.

Press

3D MODE

button to

select 3D Mode

Normal

Two images, top-and-

bottom format. Press

3D MODE

button to select

3D Mode for top/bottom.

Two images, side-by-

side format. Press

3D MODE

button to select

3D Mode for side-by-side.

For assistance call 1(800) 332-2119

3D active LCD shutter glasses enable you to view 3D images when

used with the matching IR emitter and a compatible 3D-ready TV.

3D Glasses

Battery

Cover

Power Button

LED Indicator

LCD Shutter

Lens

Battery Installation

• Each pair of glasses requires one CR2025 lithium battery.

• A continuously blinking red LED indicates low battery power. Install

a new battery.

• See lithium-battery safety information at the front of this booklet.

Open the cover. Remove the

old battery if

present.

Insert a new

battery, positive

(+) side facing

out.

Close the cover.

Emitter LED

Lit when TV is in 3D mode.

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.

Using the 3D Glasses

3D Glasses Operation

Turn on 3D Mode in the TV and 3D source device.

Press the

POWER

button on the glasses to turn on the glasses.

When the 3D program is complete, turn off 3D mode in the TV and

3D source device and turn off the glasses.

Press POWER button. The red

LED will light for three seconds.

Hold POWER button for

about two seconds. Red

LED will blink three times.

Off

50°

20 ft.

5 ft.

50°

Operating Range

Be from 5 to 20 feet away.

Notes On the 3D Glasses

• Shut off 3D glasses when not in use to extend battery life.

• Fluorescent and halogen lighting can cause the 3D glasses to

flicker. Turn off these lamps if flickering occurs.

• Turning off the TV’s 3D mode or changing the TV’s input to a 2D

input will turn off the IR emitter; the glasses will turn off automati-

cally after two minutes.

• Moving out of range of the IR emitter for more than two minutes will

cause the glasses to turn off automatically.

• Interference from other IR sources, such as motion detection

devices, may cause the glasses to flicker or work intermittently.

Turn off other IR source if interference occurs.

• The IR emitter in this system can also be used with Samsung 3D

glasses model SSG-2100AB. Information about these glasses can

be obtained from Samsung USA at www.samsung.com/usa/.

• You can also check www.mitsubishi-tv.com for any updates about

compatible glasses.

Inhaltsverzeichnis

Andere Mitsubishi Electric TV-Zubehör Handbücher

Mitsubishi Electric

Mitsubishi Electric 3DC-1000 Bedienungsanleitung

Beliebte TV-Zubehör Handbücher anderer Marken

pass & seymour

pass & seymour GFCI Bedienungsanleitung

Skyvue

Skyvue SECURITY ALARM DEVICE Bedienungsanleitung

Niles

Niles C5-RFWM Bedienungsanleitung

Philips

Philips SWA3554 Bedienungsanleitung

Sony

Sony CRU-52X1 Bedienungsanleitung

BVE

BVE MATRIX 7xe Bedienungsanleitung

Epson

Epson Moverio BT-100 Bedienungsanleitung

Philips

Philips MONCARD Bedienungsanleitung

Alcatel

Alcatel onetouch v100 Bedienungsanleitung

Flow

Flow 836 ONT Bedienungsanleitung

AIRIS

AIRIS G819 Bedienungsanleitung

Philips

Philips LC7.1E Bedienungsanleitung

Loewe

Loewe Digital Recorder + Bedienungsanleitung

Sceptre

Sceptre Stello Bedienungsanleitung

Philips

Philips Flavors 42FDF7013 Bedienungsanleitung

Goodmans

Goodmans GD11FVRSD32 Bedienungsanleitung

Philips

Philips Clon99-BKI Bedienungsanleitung

Serene

Serene TVDirect TV-95 Bedienungsanleitung