Mitsubishi NR-261UM-07LAN5 Bedienungsanleitung

SERVICE MANUAL

MITSUBISHI ELECTRIC CORP. SANDA WORKS

Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

SE037611113E Ver.ppt11E NR-261UM-07LAN5

MITSUBISHI MOTORS

HDD/DVD CAR NAVIGATION SYSTEM

2012 Sep.

Model No. : NR-261UM-07LAN5

MELCO Model Code : 3AP253

CONTENTS

● DISASSEMBLING PROCEDURES .......................................... 2～23

● PARTS LIST....................................................................................24

● ELECTRICAL PARTS LIST..................................................... 25～48

PART No. : 8750A322

2Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

M084: NAME-CARD(NR-261UM-07LAN5)

Ⓑx 4

M024: PIN-MONI

M068: ASSY-COVER-F

M051: PANEL-HDD

0.4 +0.15/-0.05PIN-MONIM024

Tighten torque(N・ｍ）Screw/NameNo.

Ⓑ0.7 +0.2/-0.1M3X6

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Insert the S7-HDD to the S2-CHASSIS, and screw the two screws.

2.Set M051.

3.Pull out the slide part of the S2-CHASSIS, and screw M086 with

the four screws (Ⓑ), and M024.

4.Insert the FPC of M086 to the S2-CHASSIS.

5.Set back the slide after M068 set.

S2-CHASSIS

S7-HDD

Two screws

Fold and set.

Set this hook at first.

Slide

Continuity side

Lock after FPC inserted.

Do not break hexagon socket.

Top

M086: S2-MONI

Latch the hook at right and left,

then push the top. (After

assembling, check if M068

and the panel is seamless.)

3Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Screw M016 with the two screws(Ⓐ) and the three screws(Ⓒ).

2.Screw the nine screws(Ⓒ) and the two screws(Ⓚ).

Ⓒx 9

Ⓚx 2

Ⓐx 2

Ⓒx 3

M016: COVER-TOP

M3X6 0.4 +0.2/-0.1Ⓐ

Refer in the fig.2.6X4Ⓒ

Tighten torque(N・ｍ）ScrewNo.

Ⓚ0.7 +0.2/-0.1M3X10

Tighten torque(N ・m) : 0.3 +0.05/-0.05

Tighten torque(N ・m) : 0.4 +0.2/-0.1

Latch the two hooks.

4Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Hook M076 to M070, and screw the five screws(Ⓙ).

2.Pull out the slide part of the S3-CHASSIS, and pass the arm through

to the hole of the S3-PANEL-SUB.<Step1~3>

3.Screw the three screws(Ⓐ).

Ⓐx 3

Ⓙx 5

M076: ASSY-PCB-PANEL M070: ASSY-PANEL-SUB

M3X6 0.7 +0.2/-0.1Ⓐ

0.12 +0.01/-0.012X4Ⓙ

Tighten torque(N・ｍ）ScrewNo.

S3-CHASSIS

S3-PANEL-SUB

Remove the arm protector.

(1)After pull out the slide chassis till it stops, pass the

tip through to panel each one side. <Step1>

<Step1> Pass the tip of slide chassis

through to panel by each.

Slide chassis

S3-PANEL-SUB

Arm

<Step2> After passed the arm of one

side, pass the another side of arms.

<Step3> Push the front of panel.

(2)After passed the one arm, pass another

arm with bending it internally. <Step2>

Do not give scratch to panel by arms.

(3)Push the front of panel to

connector mating. <Step3>

(4) Push the square holes at side(two places) and

downside(three places), till the hooks set.<Step3>

Latch M076 to the hooks.

5Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Screw M010 to M025 with two screws(Ⓚ).

2.Connect LEAD-CONNECTOR of the S4-HEAT SINK to the S4-CHASSIS.

3.Screw the S4-HEAT-SINK with four screws(Ⓐ).

M3X6 0.7 +0.2/-0.1Ⓐ

0.7 +0.2/-0.1M3X10Ⓚ

Tighten torque(N・ｍ）ScrewNo.

Ⓐx 4

Ⓚx 2

M025: HEAT-SINK

M010: MOTOR-FAN

S4-HEAT-SINK

S4-CHASSIS

LEAD-CONNECTOR

6Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Screw M082 with the two screws(Ⓐ).

2.Screw the COVER-DV3 with the one screw(Ⓐ).

3.Connect the FPC to M082.

M3X6 0.7 +0.2/-0.1Ⓐ

Tighten torque(N・ｍ）ScrewNo.

Ⓐx 2

Ⓐ

M082: ASSY-PCB-CONN

Pass salient to the square hole

on the circuit board.

Fit reentrant on the circuit board

to salient.

Set FPC to COVER-DV3.

Lock after FPC connected.

FPC

7Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Connect FFC from S5-CHASSSIS to S5-DECK.

2.Fit the salients and put S5-DECK to S5-CHASSIS.

3.Set FPC-1 at the hooks of S5-DECK.

4.Insert the FFC to the cover of the S5-DECK. (View J)

5.Set M012, and screw the five screws(Ⓐ) and two screws(Ⓒ).

6.Connect FPC-2 from S5-DECK to S5-CHASSIS. Ⓐx 3

Ⓐx 2

Ⓒx 2

M012: CHASSIS-L

S5-DECK

S5-CHASSIS

FPC-2 FPC-1

FFC

Lock after FPC connected.

Set FPC-1 at these hooks.

Fit the dowels.

Insert M012 from downside surely.

Latch the hooks to the

square holes.

Fit the dowels.

Fit the square holes

to the salients.

Lock after FFC connected.

Continuity side

M3X6 0.7 +0.2/-0.1Ⓐ

0.4 +0.2/-0.12.6X4Ⓒ

Tighten torque(N・ｍ）ScrewNo.

FFC

View J

FFC

Insert

8Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Set M015 and screw the five screws(Ⓒ).

2.Remve the separator and stick M035 to M015.

3.Set M077 to S5-CHASSIS while matching the two salients.

4.Connect FFC from HDD circuit on S5-CHASSIS to M077.(View F)

5.Stick M029 to Navicore of M077.

6.Set M067, and screw the one screw(Ⓓ) and the four screws(Ⓔ).

0.4 +0.2/-0.1M2.6X3Ⓓ

2.6X4 0.4 +0.2/-0.1Ⓒ

0.4 +0.2/-0.1M2.6X6Ⓔ

Tighten torque(N・ｍ）ScrewNo.

Ⓔx 4

Ⓓ

Ⓒx 5

M067: ASSY-SHIELD

M029: SHEET-HS

M077: ASSY-PCB-DIGITAL

M035: SHEET-DI

M015: CASE-DIGITAL

Put on the Navicore.

Lock after FFC

connected.

FFC from HDD.

View F

Engage the connectors.

(Push “PUSH” on circuit board)

Fold

Remove the connector covers.

Fit the dowel to the hole.

Fit the salient of post to

the hole.

S5-CHASSIS

Be careful to not change

the shape when

assembling.

9Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Connect M007 to M083. (Either direction of the connector can be connected.)

2.Screw the M083 with the one screw(Ⓐ).

3.Latch the hook of M007 to the hook.

4.Connect M007 to M081.

M3X6 0.7 +0.2/-0.1Ⓐ

Tighten torque(N・ｍ）ScrewNo.

M007: LEAD-CONNECTOR 4P

M083: ASSY-PCB-SENSOR

Ⓐ

M081: ASSY-PCB-ANALOG

Fig. A

Pass the Lead-Connector

to area A of Fig. A.

Latch the Lead-Connector

to the hook.

Hook latch position.

Assembling Angle of M083

Remove the adsorption sheet

of P604.

10 Your company internal use only.Copyright (C) Mitsubishi Electric Corporation.

NR-261UM-07LAN5

DISASSEMBLING PROCEDURES

●Disassembling procedures

In reverse of assembling procedures.

●Assembling procedures

1.Screw M081 with the five screws(Ⓐ).

2.Screw the S5-HOLDER with the four screws(Ⓐ) from a→b→c→d.

3.Latch the square hole of M021 to the hook, and set the dowel to the hole. (Fig. B)

4.Screw M021 with the one screw(Ⓐ).

M3X6 0.7 +0.2/-0.1Ⓐ

Tighten torque(N・ｍ）ScrewNo.

Ⓐ

M021: BRACKET-NAVI

Ⓐx 9

S5-HOLDER

Fig. B

There must be no space after

tightening of the screw.

Dowel Hook

M081: ASSY-PCB-ANALOG

Inhaltsverzeichnis

Andere Mitsubishi Autoempfänger Handbücher

Mitsubishi

Mitsubishi DY-5MU4R69-T-3 Bedienungsanleitung

Mitsubishi

Mitsubishi CQ-EB6260L Bedienungsanleitung

Mitsubishi

Mitsubishi DY-6MW7U53-2 Bedienungsanleitung

Mitsubishi

Mitsubishi CQ-JB3160AA Bedienungsanleitung

Mitsubishi

Mitsubishi MZ360119EX(DPXMP2090SM4) Bedienungsanleitung

Mitsubishi

Mitsubishi MZ360236EX(KDC336AXAM4) Bedienungsanleitung

Mitsubishi

Mitsubishi DY-1MU3E21-T Bedienungsanleitung

Mitsubishi

Mitsubishi MMES Bedienungsanleitung

Mitsubishi

Mitsubishi DY-1MU3R45-T Bedienungsanleitung

Mitsubishi

Mitsubishi MZ360216EX Bedienungsanleitung

Mitsubishi

Mitsubishi DY-2X64WT-2-TH Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung